DOI QR코드

DOI QR Code

ASSESSMENT OF ACTIVITY-BASED PYROPROCESS COSTS FOR AN ENGINEERING-SCALE FACILITY IN KOREA

  • KIM, SUNGKI (Nuclear Fuel Cycle Analysis Department, Korea Atomic Energy Research Institute) ;
  • KO, WONIL (Nuclear Fuel Cycle Analysis Department, Korea Atomic Energy Research Institute) ;
  • BANG, SUNGSIG (Department of Business and Technology Management, Korea Advanced Institute of Science and Technology)
  • Received : 2015.04.16
  • Accepted : 2015.07.06
  • Published : 2015.12.25

Abstract

This study set the pyroprocess facility at an engineering scale as a cost object, and presented the cost consumed during the unit processes of the pyroprocess. For the cost calculation, the activity based costing (ABC) method was used instead of the engineering cost estimation method, which calculates the cost based on the conceptual design of the pyroprocess facility. The calculation results demonstrate that the pyroprocess facility's unit process cost is $194/kgHM for pretreatment, $298/kgHM for electrochemical reduction, $226/kgHM for electrorefining, and $299/kgHM for electrowinning. An analysis demonstrated that the share of each unit process cost among the total pyroprocess cost is as follows: 19% for pretreatment, 29% for electrochemical reduction, 22% for electrorefining, and 30% for electrowinning. The total unit cost of the pyroprocess was calculated at $1,017/kgHM. In the end, electrochemical reduction and the electrowinning process took up most of the cost, and the individual costs for these two processes was found to be similar. This is because significant raw material cost is required for the electrochemical reduction process, which uses platinum as an anode electrode. In addition, significant raw material costs are required, such as for $Li_3PO_4$, which is used a lot during the salt purification process.

Keywords

Acknowledgement

Grant : 파이로 종합관리 기술개발

References

  1. MIT, The Future of the Nuclear Fuel Cycle, Massachusetts Institute of Technology, Cambridge, USA, 2010, pp. 8-12.
  2. S.K. Kim, W.I. Ko, Y.H. Lee, Economic viability of metallic sodium-cooled fast reactor fuel in Korea, Sci. Technol. Nucl. Installations 2013 (2013) 1-10.
  3. KAERI, Preliminary Conceptual Design and Cost Estimation for Korea Advanced Pyroprocess Facility Plus (KAPF+), Korea Atomic Energy Research Institute, Daejeon, Korea, 2011, pp. 15-17.
  4. OECD/NEA, The Economics of the Back-end of the Nuclear Fuel Cycle, Organization for Economic Cooperation and Development/Nuclear Energy Agency, Paris, France, 2013, pp. 116-117.
  5. S.K. Kim, W.I. Ko, Y.H. Lee, Development and validation of a nuclear fuel cycle analysis tool: a future code, Nucl. Eng. Technol. 45 (2013) 665-674. https://doi.org/10.5516/NET.06.2012.081
  6. D.E. Shropshire, K.A. Williams, W.B. Boore, J.D. Smith, B.W. Dixon, M. Dunzik-Gougar, R.D. Adams, D. Gombert, Advanced Fuel Cycle Cost Basis, Idaho National Laboratory (INL), Idaho Falls, USA, 2007. F2/D2-3.
  7. J. Ratnatunga, S.C. Michael, K.R. Balachandran, Cost management in Sri Lanka: a case study on volume, activity and time as cost drivers, Int. J. Account. 47 (2012) 281-301. https://doi.org/10.1016/j.intacc.2012.07.001
  8. J.D. Park, Fundamental Cost Management Accounting, Hyungseul Press, Seoul, Korea, 2005, pp. 461-465.
  9. A. Challal, M. Tkiouat, The design of cost estimating model of construction project: application and simulation, Open J. Account. 1 (2012) 15-26. https://doi.org/10.4236/ojacct.2012.11003
  10. M.M. Mowen, D.R. Hansen, D.L. Heitger, Managerial Accounting: The Cornerstone of Business Decisions, Southwestern Press, Nashville, USA, 2012, pp. 613-621.
  11. P. Chwastyk, M. Kolosowskia, Estimating the cost of the new product in development process, Procedia. Eng. 69 (2014) 351-360. https://doi.org/10.1016/j.proeng.2014.02.243
  12. H.J. Ham, Engineering Economics, Donghyun Press, Uijeongbu, Korea, 2004, pp. 402-410.
  13. L. Qian, D. Ben-Arieh, Parametric cost estimation based on activity-basedcosting:a case studyfor designand development of rotational parts, Int. J. Prod. Econ. 113 (2008) 805-818. https://doi.org/10.1016/j.ijpe.2007.08.010
  14. S. Langmaak, S. Wiseall, C. Bru, R. Adkins, J. Scanlan, A. Sobester, An activity-based-parametric hybrid cost model to estimate the unit cost of a novel gas turbine component, Int. J. Prod. Econ. 142 (2013) 74-88. https://doi.org/10.1016/j.ijpe.2012.09.020
  15. AACE, Skills & Knowledge of Cost Engineering- Appendix -3, AACE International Press, West Virginia, USA, 2004.
  16. H.G. Shin, Intermediate Accounting, Tamjin Press, Seoul, Korea, 2005, pp. 439-445.
  17. S.J. Kang, The Theory of Cost Estimation, Dunam Press, Seoul, Korea, 2010, pp. 55-61.
  18. Z. Qingge, A new activity-based financial cost management method, Phys. Procedia. 33 (2012) 1906-1912. https://doi.org/10.1016/j.phpro.2012.05.301
  19. D. Ben-Arieh, L. Qian, Activity-based cost management for design and development stage, Int. J. Prod. Econ. 83 (2003) 169-183. https://doi.org/10.1016/S0925-5273(02)00323-7
  20. W.H. Tsai, C.H. Yang, J.C. Chang, H.L. Lee, An activity-based costing decision model for life cycle assessment in green building projects, Eur. J. Oper. Res. 238 (2014) 607-619. https://doi.org/10.1016/j.ejor.2014.03.024
  21. Y. Lievens, W. Van Den Bogaert, K. Esteloot, Activity-based costing: a practical model for cost calculation in radiotherapy, Int. J. Radiat. Oncol. Biol. Phys. 57 (2003) 522-535. https://doi.org/10.1016/S0360-3016(03)00579-0

Cited by

  1. Study of activity based costing implementation for palm oil production using value-added and non-value-added activity consideration in PT XYZ palm oil mill vol.309, pp.None, 2018, https://doi.org/10.1088/1757-899x/309/1/012059
  2. Investigations on Detecting Potential Nuclear Material Diversion from a Pyroprocessing Facility vol.205, pp.3, 2015, https://doi.org/10.1080/00295450.2018.1500074