Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지
DOI QR코드

DOI QR Code

Fabrication of Discontinuous Al2O3-Dispersed TZP Fibers by a Sol-Gel Method

졸-겔법을 이용한 Al2O3가 분산된 TZP 단섬유의 제조

  • Sim, Soo-Man (School of Materials Science and Engineering, Hongik University)
  • 심수만 (홍익대학교 재료공학부)
  • Received : 2014.11.21
  • Accepted : 2014.12.23
  • Published : 2015.01.31
Download PDF
⟨ Previous Next ⟩

Abstract

Discontinuous, polycrystalline $Al_2O_3$-dispersed TZP fibers were prepared by the centrifugal spinning of a colloidal $ZrO_2$ sol containing Y and Al nitrates and poly(vinyl alcohol). Factors affecting the rheological properties of the sols, such as sol concentrations, aging, and the amounts and types of additives, were investigated by measuring the shear viscosities. The flow characteristics of the sols were studied in relation to the spinnability by measuring the viscosity with respect to the shear rate. The spinnability was obtained through the addition of a polymer which increases the viscosity to a range of optimum viscosity values for spinning. Aging the sols containing the additives did not noticeably change the sol viscosities at room temperature up to 30 days. The flow behavior of the spinnable sols progressively changed from nearly Newtonian to pseudoplastic with an increase in the sol concentration.

Keywords

References

  1. C. Romine, "New High-Temperature Ceramic Fiber," Ceram. Eng. Sci. Proc., 8 [7-8] 755-65 (1987). https://doi.org/10.1002/9780470320402.ch31
  2. A. Poulon-Quintin, M. H. Berger, and A. R. Bunsel, "Mechanical and Microstructural Characterisation of Nextel 650 Alumina-Zirconia Fibres," J. Eur. Ceram. Soc., 24 [9] 2769-83 (2004). https://doi.org/10.1016/j.jeurceramsoc.2003.08.011
  3. K. Tsukuma, K. Ueda, K. Matsushita, and M. Shimada, "High-Temperature Strength and Fracture Toughness of $Y_2O_3-Partially Stabilized $ZrO_2/Al_2O_3$ Composites," J. Am. Ceram. Soc., 68 [2] C-56-58 (1985).
  4. B. S. Mitchell, "Crystallization and Solidification Studies in Calcia-Alumina Fibres Formed via Inviscid Melt-Spinning," Ceram. Int., 24 [1] 67-71 (1998). https://doi.org/10.1016/S0272-8842(96)00083-1
  5. M. Allahverdi, R. A. L. Drew, and J. O. Strom-Olsen, "Melt-Extracted Oxide Ceramic Fibres-The Fundamentals," J. Mater. Sci., 31 [4] 1035-42 (1996). https://doi.org/10.1007/BF00352905
  6. T. Yogo and H. Iwahara, "Synthesis of $\alpha$-Alumina Fibre from Modified Aluminum Alkoxide Precursor," J. Mater. Sci., 26 5292-96 (1991). https://doi.org/10.1007/BF01143223
  7. T. Makki and S. Sakka, "Formation of Alumina Fibres by Unidirectional Freezing of Gel," J. Non-Cryst. Solids, 82 [1-3] 239-45 (1986). https://doi.org/10.1016/0022-3093(86)90137-7
  8. T. Makki and S. Sakka, "Preparation of Alumina Fibre by Sol-Gel Method," J. Non-Cryst. Solids, 100 303-08 (1988). https://doi.org/10.1016/0022-3093(88)90037-3
  9. S. Sakka and H. Kozuka, "Rheology of Sols and Fiber Drawing," J. Non-Cryst. Solids, 100 [1-3] 142-53 (1988). https://doi.org/10.1016/0022-3093(88)90011-7
  10. J. Chandradass and M. Balasubramanian, "Sol-Gel Processing of Alumina Fibres," J. Mater. Proc. Tech., 173 [3] 275-80 (2006). https://doi.org/10.1016/j.jmatprotec.2005.11.030
  11. B. Liu, X. Lin, L. Zhu, X. Wang, and D. Xu, "Fabrication of Calcium Zirconate Fibers by the Sol-Gel Method," Ceram. Int., 40 [8] 12525-31 (2014). https://doi.org/10.1016/j.ceramint.2014.03.025
  12. D. Li and Y. Xia, "Direct Fabrication of Composite and Ceramic Hollow Nanofibers by Electrospinning," Nano Lett., 4 [5] 933-38 (2004). https://doi.org/10.1021/nl049590f
  13. M. M. Den, "Continuous Drawing of Liquids to Form Fibers," Ann. Rev. Fluid Mech., 12 365-87 (1980). https://doi.org/10.1146/annurev.fl.12.010180.002053
  14. M. D. Sacks and R. S. Sheu, Rheological Characterization During the Sol-Gel Transition; pp. 100-109 in Science of Ceramic Chemical Processing, Ed. by L. L. Hench and D. R. Ulrich, John Wiley & Sons, Inc., New York, 1986.
  15. H. Kozuka, H. Kuroki, and S. Sakka, "Flow Characteristics and Spinnability of Sols Prepared from Silicon Alkoxide Solution," J. Non-Cryst. Solids, 100 [1-3] 226-30 (1988). https://doi.org/10.1016/0022-3093(88)90022-1
  16. A. Ziabicki, Physical Fundamentals of the Fiber-Spinning Processes; pp. 13-94 in Man-Made Fibers Science and Technology, Vol. 1, Ed. by H. F. Mark, S. M. Atlas, and E. Cernia, Interscience Publishers, John Wiley & Sons, Inc., New York, 1967.
  17. K. Toyoshima, General Properties of Polyvinyl Alcohol in Relation to its Applications; pp. 17-65 in Polyninyl Alcohol Properties and Applications, Ed. by C. A. Finch, John Wiley & Sons, Inc., London, 1973.
  18. S. Sakka and K. Kamiya, "The Sol-Gel Transition in the Hydrolysis of Metal Alkoxides in Relation to the Formation of Glasses, Fibers and Films," J. Non-Cryst. Solids, 48 31- 46 (1982) https://doi.org/10.1016/0022-3093(82)90244-7
  19. N. Casson, Flow Equation for Pigment-Oil Suspensions of the Printing Ink Type; pp. 84-104 in Rheology of Disperse Systems, Ed. by C. C. Mill, Pergamon Press, New York, 1959.
  20. J. Livage, K. Doi, and C. Mazieres, "Nature and Thermal Evolution of Amorphous Hydrated Zirconium Oxide," J. Am. Ceram. Soc., 51 [6] 349-53 (1968). https://doi.org/10.1111/j.1151-2916.1968.tb15952.x