DOI QR코드

DOI QR Code

An Experimental Study on Mathematical Model to Predict Bead Width in GMA Weldment

GMA 용접부의 비드폭 예측을 위한 수학적 모델에 관한 실험적 연구

  • Received : 2014.05.21
  • Accepted : 2015.01.16
  • Published : 2015.02.01

Abstract

Generally welding is one of the most important processes to have a strong influence on the quality and productivity from a manufacture-based industry such as shipbuilding, automotive and machinery. The GMA(Gas Metal Arc) welding process involves large number of interdependent welding parameters which may affect product quality, productivity and cost effectiveness. To solve such problems, mathematical models are required to select the welding parameters for GMA welding process. In this study, the GMA welding process was studied using the information generated during the welding. The statistical analysis of a generalized regression approach was conducted by the following three methods: Firstly using the mathematical model (linear regression, 2nd regression); Secondly GA(Genetic Algorithm) with intelligent models; And finally using response surface analysis of models to develop the relationships between welding parameters and bead width as welding quality.

Keywords

References

  1. Kim, J. M., "Study on Weld Quality Assessment Method of Short-Circuit Gas Metal Arc Welding," M.Sc. Thesis, Mechanical engineering, Korea Advanced Institute of Science and Technology, 2001.
  2. Doumanidis, G., Hale, M., and Hardt, D. E., "Multi-Variable Control of Arc Welding Processes," Proc. of Int. Conf. on Trends in Welding Research, Gatlinburg, Tennessee, pp. 449-457, 1986.
  3. Remwick, R. J. and Richardson, R. W., "Experimental Investigation of GTA Weld Pool Oscillation," Welding Journal, Vol. 62, No. 2, pp. 29-35, 1983.
  4. Gonseth, P. M. and Blanc, P., "Optiguide - A New Optical Joint Tracking Device," Welding Journal, Vol. 62, No. 9, pp. 27-29, 1983.
  5. Lee, S. H., "Investigation of Metal Transfer in GMAW using Pinch Instability Theory with Arc Pressure," J. Korean. Soc. Precis. Eng., Vol. 11, No. 3, pp. 191-196, 1994.
  6. Lukens, W. E. and Morris, R. A., "Infrared Temperature Sensing of Cooling Rates for Arc Welding Control," Welding Journal, pp. 27-33, 1982.
  7. Kozono, Y. and Kokura, S., "Relation between Surface Temperature and Reverse Side Bead Width in Girth TIG Welding for Stainless Steel Tube," quarterly journal of the japan welding society, Vol. 4, No. 2, pp. 331-335, 1986. https://doi.org/10.2207/qjjws.4.331
  8. Haytcher, S. A., Kilty, A. L., Ludewig, H. W., Rees, D. E., Siwicke, J. H., and Wallace, B. L., "Method for arc Welding Fault Detection," US Patent, No. 5521354, 1996.
  9. Quinn, T. P., Smith, C., McCowan, C. N., Blachowiak, E., and Madigan, R. B., "Arc Sensing for Defects in Constant-Voltage Gas Metal Arc Welding," Welding Journal, Vol. 78, No. 9, pp. 322-328, 1999.
  10. Adolfsson, S., Bahrami, A., Bolmsjo, G., and Claesson, I., "On-line quality monitoring in shortcircuit gas metal arc welding," Welding Journal, Vol. 78, No. 2, pp. 59-73, 1999.
  11. Kang, S. K., Moon, H. S., and Na, S. J., "A study on Determining Arc Stability using Weight of Spatter," Journal of KWJS, Vol. 15, No. 6, pp. 41-48, 1997.
  12. Reilly, R., Xu, X., and Jones, J. E., "Neural Network Application to Acoustic Emission Signal Processing," proc. of the Int. Conf. on the Joining of Materials, Vol. 31, No. 2, pp. 146-160, 1995.