참고문헌
- Kim, D. H. and Lee, C. M., "A Fundamental Study on the Evaluation of Machining Characteristics in Laser-assisted Milling of Titanium alloys," Proc. of KSPE Spring Conference, p.136, 2014.
- Kim, D.-H. and Lee, C.-M., "A Study of Cutting Force and Preheating-Temperature Prediction for Laser-assisted Milling of Inconel 718 and AISI 1045 steel," International Journal of Heat and Mass Transfer, Vol. 71, pp. 264-274, 2014. https://doi.org/10.1016/j.ijheatmasstransfer.2013.12.021
- Rozzi, J. C., Pfefferkorn, F. E., and Shin, Y. C., "Experimental Evaluation of the Laser Assisted Machining of Silicon Nitride Ceramics," Journal of Manufacturing Science and Engineering, Vol. 122, No. 4, pp. 666-670, 2000. https://doi.org/10.1115/1.1286556
- Kim, K. S. and Lee, C. M., "Analysis of Moving Heat Source for Laser Assisted Machining of Plate by Feed Rate Control," J. Korean Soc. Precis. Eng., Vol. 28, No. 12, pp. 1341-1346, 2011.
- Ahn, S. H. and Lee, C. M., "A Study on Large-area Laser Processing Analysis in Consideration of the Moving Heat Source," Int. J. Precis. Eng. Manuf., Vol. 12, No. 2, pp. 285-292, 2011. https://doi.org/10.1007/s12541-011-0038-3
- Kim, J. H., Choi, J. Y., and Lee, C. M., "Thermal Analysis for Laser Assisted Turning of Square Bar using Laser Heat Source Projection Method," J. Korean Soc. Precis. Eng., Vol. 28, No. 12, pp. 1353-1358, 2011.
- Sim, M. S. and Lee, C. M., "A Study on the Laser Preheating Effect of Inconel718 Specimen with Rotated Angle with Respect to 2-axis," Int. J. Precis. Eng. Manuf., Vol. 15, No. 1, pp. 189-192, 2014. https://doi.org/10.1007/s12541-013-0324-3
- Woo, W. S. and Lee, C. M., "A Basic Study on Laser Preheating Effect for Cylindrical SM45C Specimens," Proc. of KSPE Spring Conference, p. 610, 2014.
- Kim, I. W. and Lee, C. M., "A Basic Study on Laser Preheating Effect of SM45C Specimens with Spherical Surface," Proc. of KSPE Spring Conference, p. 609, 2014.
- Lusquinis, F., Conde, J. C., Bonss, S., Riveiro, A., Quintero, F., et al., "Theoretical and Experimental Analysis of High Power Diode Laser (HPDL) Hardening of AISI 1045 Steel," Applied Surface Science, Vol. 254, pp. 948-954, 2007. https://doi.org/10.1016/j.apsusc.2007.07.200
- Park, T. W., Cho, J. H., and Na, S. J., "A Study on Laser Joining Low Carbon Steel and Aluminum Alloy - Part 2 : Process Analysis," Journal of KWS, Vol. 23, No. 5, pp. 31-37, 2005.
피인용 문헌
- A Study on Three-Dimensional Model Reconstruction Based on Laser-Vision Technology vol.32, pp.7, 2015, https://doi.org/10.7736/KSPE.2015.32.7.633
- Study on Accuracy Evaluation of Laser Lens Changer for a Laser-Assisted Machining System vol.32, pp.8, 2015, https://doi.org/10.7736/KSPE.2015.32.8.687
- Analytical Study of the Determination of Distance between the Laser Heat Source and Tool for Laser-Assisted Machining vol.32, pp.8, 2015, https://doi.org/10.7736/KSPE.2015.32.8.699
- Study on the Preheating Method of NURBS Shaped Workpiece by Laser Assisted Machining vol.33, pp.2, 2016, https://doi.org/10.7736/KSPE.2015.33.2.101