참고문헌
- D. M. Moon, T. G. Choi and M. -Y. Lyu, "Prediction of mechanical property of glass fiber reinforced polycarbonate and evaluation of warpage through injection molding", Polymer(Korea), Vol. 38, pp. 708-713, 2014. DOI: http://dx.doi.org/10.7317/pk.2014.38.6.708
- M. Lee, H. Kim, M. Y. Lyu, "A study on the warpage of glass fiber reinfoced plastics for part design and operation condition: Part1. Amorphous plastics", Polymer(Korea), Vol. 36, pp. 555-563, 2012.
- M. Lee, H. Kim, M. Y. Lyu, "A study on the warpage of glass Fiber reinfoced plastics for part design and operation condition: Part2. Crystalline Plastics", Polymer(Korea), Vol. 36, pp. 677-684, 2012.
- X. Wang, G. Zhao, G. Wang, "Reserch on the reduction of sink mark and warpage of the molded part in rapid heat cycle molding process", Materials and Design, Vol. 47, pp. 779-792, 2013. DOI: http://dx.doi.org/10.1016/j.matdes.2012.12.047
- J. G. Kovacs, B. Siklo, "Investigation of cooling effect at coners in injection molding", International Communication in Heat and Mass Transfer, Vol. 38, pp. 1330-1334, 2011. DOI: http://dx.doi.org/10.1016/j.icheatmasstransfer.2011.08.007
- A. Agazzi, V. Sobotka, R. Le Goff, D. Garcia, Y. Jarny, "A methodology for the design of effective cooling system in injection moulding", Int J Mater Form, Vol. 3, pp. 13-16, 2010. DOI: http://dx.doi.org/10.1007/s12289-010-0695-2
- H. S. Park, N. H. Phan, "Design of conformal cooling channels for an automotive part", International Journal of Automotive Technology, Vol. 10, pp. 87-93, 2009. DOI: http://dx.doi.org/10.1007/s12239-009-0011-7
- H. S. Park, X. P. Dang, "Optimization of conformal cooling channels with array of baffles for plastics injection mold", Int. J. Precision Engineering and Manufacturing, Vol. 11, pp. 879-89, 2010. DOI: http://dx.doi.org/10.1007/s12541-010-0107-z
- J. Liu, Z. Lu, Y. Shi, W. Xu, J. Zhang, "Investigation into manufacturing injection mold via indirect selective laser sintering", Int J Adv Technol, Vol. 48, pp. 155-163, 2010. DOI: http://dx.doi.org/10.1007/s00170-009-2272-8
- X. Li, G. Zhao, Y. Guan, H Li, "Reserch on thermal stress, deformation, and fatigue lifetime of the rapid heating cycle injection mold", Int J Adv Manuf Technol, Vol. 45, pp. 261-275, 2009. DOI: http://dx.doi.org/10.1007/s00170-009-1969-z
- G. Zhao, G. Wang, Y. Guan, H. Li, "Reserch and application of a new rapid heat cycle molding with electric heating and coolant cooling to improve the surface quality of large LCD TV panels", Poly. Adv. Technol., Vol. 22, pp. 476-487, 2011. DOI: http://dx.doi.org/10.1002/pat.1536
- M. Lee, T. W. Kim, "A study on the heat sink with internal structure using peltier module in the natural and forced convection," Journal of the Korea Academia-Industrial cooperation Society, Vol. 15, pp. 4072-4080, 2014. https://doi.org/10.5762/KAIS.2014.15.7.4072
- W. H. Chen, C. Y. Liao, C. I. Hung, "A numerical study on the performance of miniature thermoelectric cooler affected by thomson effect", Appl. Energy, Vol. 89, pp. 464-473, 2012. DOI: http://dx.doi.org/10.1016/j.apenergy.2011.08.022
- K. H. Lee, O. J. Kim, "Analysis on the performance of the thermoelectric microcooler", Int. J. Heat Mass Transfer, Vol. 50, pp. 1982-1992, 2007. DOI: http://dx.doi.org/10.1016/j.ijheatmasstransfer.2006.09.037
- J. Luo, L. Chen, F. Sun, C. Wu, "Optimum allocation of heat transfer surface area for cooling load and COP optimization of a thermoelectric refrigerator", Energy Convers Manage, Vol. 44, pp. 3197-3206, 2003. DOI: http://dx.doi.org/10.1016/S0196-8904(03)00107-9
- M. Lee, T. W. Kim, "A study on the heat sink with internal structure using peltier module in the forced convection," Journal of the Korea Academia-Industrial cooperation Society, Vol. 15, pp. 3410-3415, 2014. https://doi.org/10.5762/KAIS.2014.15.6.3410