DOI QR코드

DOI QR Code

A Study on the Analysis of 20,000rpm Heavy-Cutting Spindle for Precision Machining

정밀가공을 위한 20,000rpm 중절삭 스핀들 해석에 관한 연구

  • Oh, Nam-Seok (School of Mechanical Engineering, Changwon National University) ;
  • Kim, Dong-Hyeon (School of Mechanical Engineering, Changwon National University) ;
  • Lee, Choon-Man (School of Mechanical Engineering, Changwon National University)
  • Received : 2014.11.03
  • Accepted : 2014.12.03
  • Published : 2015.01.01

Abstract

A spindle unit is very important in machine tools. It has a direct effect on machining accuracy. The static and dynamic characteristics of the spindle unit should be considered in the initial design stage for manufacturing of precision product. This study describes an investigation for deriving design stability of a 20,000rpm heavy-cutting spindle for precision machining. Static and dynamic characteristics of the spindle, such as deformation, stress, natural frequency and mode shapes are analyzed using finite element analysis. The 20,000rpm heavy-cutting spindle is confirmed that it is successfully designed through finite element analysis.

Keywords

References

  1. Lee, Y. W. and Seong, H. G., "Dynamic Compliance Analysis and Optimization of Machine Structure," Proc. of the KSPE spring conference, pp. 63-66, 2001.
  2. Hwang, Y. K. and Lee, C. M., "A Study on the Determination of Shaft Size using the Extreme Vertices Design," Trans. Korean Soc. Machine Tool Engineers, Vol. 18, No. 2, pp. 214-220, 2009.
  3. Maeda, O., Cao, Y., and Altinatas, Y., "Expert Spindle Design System," International Journal of Machine Tools & Manufacture, Vol. 45, No. 4, pp. 537-548, 2005. https://doi.org/10.1016/j.ijmachtools.2004.08.021
  4. Lin, C.-W. and Tu, J. F., "Model-based Design of Motorized Spindle Systems to Improve Dynamic Performance at High Speeds," Journal of Manufacturing Processes, Vol. 9, No. 2, pp. 94-108, 2007. https://doi.org/10.1016/S1526-6125(07)70111-1
  5. Abele, E., Altintas, Y., and Brecher, C., "Machine Tool Spindle Units," CIRP Annals Manufacturing Technology, Vol. 59, No. 2, pp. 781-802, 2010. https://doi.org/10.1016/j.cirp.2010.05.002
  6. Kim, D. H., Choi, H. J., and Lee, C. M., "Static and Dynamic Analysis and Optimization Design of 40,000-rpm High-Speed Spindle for Machine Tools," Trans. Korean Soc. Mech. Eng. A, Vol. 37, No. 1, pp. 105-111, 2013. https://doi.org/10.3795/KSME-A.2013.37.1.105
  7. Park, S. J., Kim, D. H., and Lee, C. M., "A Study on the Determination of Optimal Shaft Size and Bearing Span Length of 45,000rpm Spindle," Proc. of the KSPE spring conference, pp. 481-482, 2010.
  8. Lee, C. H., Park, C. H., and Lee, H. S., "The Contribution of Spindle Parts to Static, Dynamic Stiffness and Design Improvement," Proc. of the KSPE Autumn conference, pp. 985-988, 2002.
  9. Ko, T. J., Gim, T. W., and Ha, J. Y., "Particular Behavior of Spindle Thermal Deformation by Thermal Bending," International Journal of Machine Tools & Manufacture, Vol. 43, No. 1, pp. 17-23, 2003. https://doi.org/10.1016/S0890-6955(02)00165-7
  10. Li, S., Zhang, Y., and Zhang, G., "A study of Pre-Compensation for Thermal Errors of NC Machine Tools," International Journal of Machine Tools & Manufacture, Vol. 37, No. 12, pp. 1715-1719, 1997. https://doi.org/10.1016/S0890-6955(97)00032-1
  11. Cerighton, E., Honegger, A., Tulsian, A., and Mukhopadhyay, D., "Analysis of Thermal Errors in a High-Speed Micro-Milling Spindle," International Journal of Machine Tools & Manufacture, Vol. 50, No. 4, pp. 386-393, 2010. https://doi.org/10.1016/j.ijmachtools.2009.11.002
  12. Park, S. J., Lee, C. M., Kim, W., and Byun, S. S., "A Study on the Evaluation of Design Stability for Vertical Machining Center Spindle by Static and Dynamic Analysis," Proc. of the KSPE spring conference, pp. 409-410, 2009.
  13. Lim, J. S., Hwang, Y. G., Lee, W. C., Chung, W. J., and Lee, C. M., "Selecting Position of Bearings to Improve Dynamic Characteristics of a High-Speed Milling Spindle," J. Korean. Soc. Precis. Eng., Vol. 18, No. 2, pp. 871-874, 2005.