DOI QR코드

DOI QR Code

미세정밀밀링 가공을 위한 검사시편의 가공조건에 따른 표면거칠기에 대한 영향 분석

The Effect of Surface Roughness according to Machining Conditions of Test Specimen for Precision Micro-milling Machining

  • Sim, Min-Seop (School of Mechanical Engineering, Changwon National University) ;
  • Kim, Dong-Hyeon (School of Mechanical Engineering, Changwon National University) ;
  • Lee, Choon-Man (School of Mechanical Engineering, Changwon National University)
  • 투고 : 2014.10.22
  • 심사 : 2014.11.28
  • 발행 : 2015.01.01

초록

Recently, many researchers and industry are looking for ways to decrease the use of lubricants because of economical and environmental reasons. One of the lubrication technologies is the MQL method. This study presents a research of MQL and Wet milling processes of Al 6061 material. For this experiment, the test specimen is suggested, and various machining conditions are applied. And, shape of micro-pattern which has been recently spotlighted is included in the test specimen. In order to compare MQL with Wet machining, several milling experiments were carried out, varying feed rate, cutting speed, depth of cut, etc. Finally, the surface roughness results of machining tests according to the process conditions were measured. It is expected that the results of machining experiments can be used to predict the surface roughness of various MQL milling processes.

키워드

참고문헌

  1. Diniz, A. E. and Micaroni, R., "Cutting Conditions for Finish Turning Process Aiming: the Use of Dry Cutting," International Journal of Machine Tools and Manufacture, Vol. 42, No. 8, pp. 899-904, 2002. https://doi.org/10.1016/S0890-6955(02)00028-7
  2. Lee, K. H. and Kim, J. Y., "Overview and Future Direction of Cleaner Production System," J. Korean Soc. Precis. Eng., Vol. 20, No. 8, pp. 12-16, 2003.
  3. Kang, J. H., "Environmentally Conscious Machining Technology and Machine-tool," J. Korean Soc. Precis. Eng., Vol. 9, No. 1, pp. 9-17, 2000.
  4. Lee, J. H., Lee, S. J., Lee, S. W., and Choi, H. J., "Characteristics of Environment-friendly Semi-dry Turning," J. Korean Soc. Precis. Eng., Vol. 19, No. 10, pp. 221-226, 2002.
  5. Hwang, J., Chung, E. S., and Hwang, D. C., "A Study on the Environmentally Conscious Machining," J. Korean Soc. Precis. Eng., Vol. 20, No. 2, pp. 50-57, 2003.
  6. Dhar, N. R., Islam, M. W., Islam, S., and Mithu, M. A. H., "The Influence of Minimum Quantity of Lubrication on Cutting Temperature, Chip and Dimensional Accuracy in Turning AISI-1040 Steel," Journal of Materials Processing Technology, Vol. 171, No. 1, pp. 93-99, 2006. https://doi.org/10.1016/j.jmatprotec.2005.06.047
  7. Hwang, Y. K., Chung, W. J., and Lee, C. M., "Experimental Study of Cutting Force and Surface Roughness Prediction in MQL Turning of Al 6061," J. Korean Soc. Precis. Eng., Vol. 25, No. 6, pp. 159-167, 2008.
  8. Lee, J. H., Ko, T. J., and Baek, D. G., "A Study on Machinability and Cost Evaluation of MQL Milling Process," J. Korean Soc. Precis. Eng., Vol. 26, No. 2, pp. 26-34, 2009.
  9. Rahman, M., Senthil Kumar, A., and Salam, M. U., "Experimental Evaluation on the Effect of Minimal Quantities of Lubricant in Milling," International Journal of Machine Tools & Manufacture, Vol. 42, No. 5, pp. 539-547, 2002. https://doi.org/10.1016/S0890-6955(01)00160-2
  10. Kim, D. H. and Lee, C. M., "A Study on the Evaluation of Machinability for Three-axis Machining Center with NC Rotary Table," Int. J. Precis. Eng. Manuf., Vol. 14, No. 10, pp. 1805-1810, 2013. https://doi.org/10.1007/s12541-013-0241-5
  11. Je, T. J., Choi, D. S., Jeon, E. C., Park, E. S., and Choi, H. J., "Trends of Flat Mold Machining Technology with Micro Pattern," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 2, pp. 1-6, 2012.
  12. Jung, J. Y., Hwang, Y. S., Lee, C. M., Chung, W. J., and Ko, T. J., "A Study on the Specimen for High speed Machining," Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 12, No. 4, pp. 77-84, 2003.
  13. Lee, C. M., Ryu, S. P., Hwang, Y. S., Jung, J. Y., Chung, W. J., and Ko, T. J., "A Study on the Evaluative Method of Workability For High Speed Machining," Proc. of the KSME Autumn conference, pp. 1858-1863, 2003.
  14. Back, I. W., Kim, J. S., Cheon, E. C., Kim, N. K., Choi, M. S., and Lee, D. W., "Machine Tool-Driving Mechanism and Design Principles," Chungmoongak, pp. 300-312, 2001.
  15. Meshii, T., Lu, K., and Takamura, R., "A Failure Criterion to Explain the Test Specimen Thickness Effect on Fracture Toughness in the Transition Temperature Region," Engineering Fracture Mechanics, Vol. 104, pp. 184-197, 2013. https://doi.org/10.1016/j.engfracmech.2013.03.025