References
- Yeh, T. J. and Wu, F. K., "Modeling and Robust Control of Worm-gear driven Systems," Simul. Model. Pract. Theory, Vol. 17, No. 5, pp. 767-777, 2009. https://doi.org/10.1016/j.simpat.2009.01.002
- Simon, V. V., "Influence of Tooth Errors and Shaft Misalignments on Loaded Tooth Contact in Cylindrical Worm Gears," Mech. Mach. Theory, Vol. 41, No. 6, pp. 707-724, 2006. https://doi.org/10.1016/j.mechmachtheory.2005.09.004
- Litvin, F. L., Vecchiato, D., Yukishima, K., Fuentes, A., Gonzalez-Perez, I., and Hayasaka, K., "Reduction of Noise of Loaded and Unloaded Misaligned Gear Drives," Comput. Meth. Appl. Mech. Eng., Vol. 195, No. 41-43, pp. 5523-5536, 2006. https://doi.org/10.1016/j.cma.2005.05.055
- Mohan, L. V. and Shunmugam, M. S., "Geometrical Aspects of Double Enveloping Worm Gear Drive," Mech. Mach. Theory, Vol. 44, No. 11, pp. 2053-2065, 2009. https://doi.org/10.1016/j.mechmachtheory.2009.05.008
- Shi, W., Qin, D., and Xu, W., "Meshing Control of the Double-Enveloping Hourglass Worm Gearing under the Conditions of Existing the Errors and the Load," Mech. Mach. Theory, Vol. 39, No. 1, pp. 61-74, 2004. https://doi.org/10.1016/S0094-114X(03)00104-6
- Lee, S., Lee, D. H., Hwang, S. C. and Lee, K. H. "Stress Analysis of Helical Gear for a Railway Reducer," J. Korean Soc. Manuf. Process Eng., Vol. 11, No. 2, pp. 55-59, 2012.
- An, I. H., Hur, N. S., Lee, I. B. and Lyu, S. K., "A Study on Effect of the Grinding in SCM420H Planetary Gear," J. Korean Soc. Manuf. Process Eng., Vol. 11, No. 5, pp. 54-59, 2012.
- Choi, B. R., Hwang, K. B., Bae, K. Y., "Analysis on Cutting Force of Tool in Gear Chamfering Process," J. Korean Soc. Manuf. Process Eng., Vol. 12, No. 1, pp. 52-62, 2013.
- An, I. H., Ahn, M. J., Xu, Z. and Lyu, S. K., "A Study on the Effect of the Honing in SCM420H Planetary Gear," J. Korean Soc. Manuf. Process Eng., Vol. 10, No. 3, pp. 13-18, 2011.
- Han, M. and Cho, J., "Strength Durability on Spur and Helical Gears in the Gearbox of Machine Tool," J. Korean Soc. Manuf. Process Eng., Vol. 13, No. 3, pp. 103-110, 2014. https://doi.org/10.14775/ksmpe.2014.13.3.103
Cited by
- Development of Rotary Cultivator for Poultry Farm vol.17, pp.2, 2018, https://doi.org/10.14775/ksmpe.2018.17.2.060
- Development of the Transfer Case for Power Distribution vol.17, pp.2, 2018, https://doi.org/10.14775/ksmpe.2018.17.2.095
- A Study on the Fabrication and Performance Evaluation of Worm Gear Reducer vol.17, pp.1, 2018, https://doi.org/10.14775/ksmpe.2018.17.1.001
- 유성기어 주행감속기 치형의 마이크로 지오메트리 최적화에 관한 연구 vol.34, pp.6, 2015, https://doi.org/10.7736/kspe.2017.34.6.371
- A Study on the Gear Tooth Micro-Geometry Optimization of Angle Drive Unit vol.35, pp.5, 2015, https://doi.org/10.7736/kspe.2018.35.5.473