DOI QR코드

DOI QR Code

Structural behavior of inverted V-braced frames reinforced with non-welded buckling restrained braces

  • Kim, Sun-Hee (Department of Architectural Engineering, University of Seoul) ;
  • Choi, Sung-Mo (Department of Architectural Engineering, University of Seoul)
  • 투고 : 2015.02.16
  • 심사 : 2015.08.03
  • 발행 : 2015.12.25

초록

A concentric braced steel frame is a very efficient structural system because it requires relatively smaller amount of materials to resist lateral forces. However, primarily developed as a structural system to resist wind loads based on an assumption that the structure behaves elastically, a concentric braced frame possibly experiences the deterioration in energy dissipation after brace buckling and the brittle failure of braces and connections when earthquake loads cause inelastic behavior. Consequently, plastic deformation is concentrated in the floor where brace buckling occurs first, which can lead to the rupture of the structure. This study suggests reinforcing H-shaped braces with non-welded cold-formed stiffeners to restrain flexure and buckling and resist tensile force and compressive force equally. Weak-axis reinforcing members (2 pieces) developed from those suggested in previous studies (4 pieces) were used to reinforce the H-shaped braces in an inverted V-type braced frame. Monotonic loading tests, finite element analysis and cyclic loading tests were carried out to evaluate the structural performance of the reinforced braces and frames. The reinforced braces satisfied the AISC requirement. The reinforcement suggested in this study is expected to prevent the rupture of beams caused by the unbalanced resistance of the braces.

키워드

과제정보

연구 과제 주관 기관 : Korea Institute of Energy Technology Evaluation and Planning(KETEP)

참고문헌

  1. AISC (2010a), Steel Construction Manual, American Institute of Steel Construction Ins.
  2. AISC (2010b), Seismic provisions for structural steel buildings, American Institute of Steel Construction Ins.
  3. ASCE 7-10 (2013), Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers. (ISBN: 0784410852)
  4. Chen, C.C., Chen, S.Y. and Liaw, J.J. (2001), "Application of low yield Strength steel on controlled plasticization ductile concentrically braced frames", Can. J. Civil Eng., 28(5), 823-836. https://doi.org/10.1139/l01-044
  5. Chou, C.C., Chen, Y.C., Pham, D.H. and Truong, V.M. (2014), "Steel braced frames with dual-core SCBs sandwiched BRBs: Mechanics, modeling and seismic demands", Eng. Struct., 72, 26-40. https://doi.org/10.1016/j.engstruct.2014.04.022
  6. FEMA-356 (2000), Pre-standard and Commentary for the Seismic Rehabilitation of Buildings, Federal Emergency Management Agency; Washington D.C., USA.
  7. Guo, Y.L., Zhang, B.H., Jiang, Z.Q. and Chen, H. (2015), "Critical load and application of core-separated buckling restrained braces", J. Construct. Steel Res., 106(3), 1-10. https://doi.org/10.1016/j.jcsr.2014.11.011
  8. Hoveidas, N. and Rafezy, B. (2012), "Overall buckling behavior of all-steel buckling restrained braces", J. Construct. Steel Res., 79(12), 151-158. https://doi.org/10.1016/j.jcsr.2012.07.022
  9. Inoue, K., Sawaizumi, S. and Higahibata, Y. (2001), "Stiffening Requirement for Un-bonded Braces Encased in Concrete Panels", J. Struct. Eng., 127(6), 712-719. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:6(712)
  10. Jiang, Z., Guo, Y., Zhang, B. and Zhang, X. (2015), "Influence of design parameters of buckling-restrained brace on its performance", J. Construct. Steel Res., 105(2), 139-150. https://doi.org/10.1016/j.jcsr.2014.10.024
  11. KBC (2009), Korean Building Code and Commentary, Architectural Institute of Korea. [In Korean]
  12. Kim, D.B. (2012), "Compressive behavior of the H-section brace which strengthened with cold formed elements for buckling restraint", University of Seoul M.S., Seoul, Korea. [In Korean]
  13. Kim, M.K. (2013), "Structural behavior for H-shape brace reinforced by cold-formed elements", University of Seoul M.S., Seoul, Korea. [In Korean]
  14. Kim, S.H. (2015), "Compressive behavior of H-shaped brace strengthened with non-welded cold-formed element", J. Construct. Steel Res., 112, 30-39. https://doi.org/10.1016/j.jcsr.2015.04.012
  15. Kim, J.G. and Park, J.H. (2008), "Cycle test of buckling restrained braces filled with square bars", Archtectural Institute of Korea, 24(10), pp. 53-60. [In Korean]
  16. New Zealand Standard, NZS 4219 (2009), Seismic Performance of Engineering Systems in Buildings. (ISBN: 1-86975-114-0)
  17. Pack, J.H. and Kim, J.G. (2008), "Cycle test of buckling restrained braces filled with square bars", Architectural Institute of Korea, 24(10), 53-60. [In Korean]
  18. Palmer, K.D., Christopulos, A.S., Lehman, D.E. and Roeder, C.W. (2014), "Experimental evaluation of cyclically loaded, lager-scale, planar and 3-d buckling restrained braced frames", J. Construct. Steel Res., 101(10), 415-425. https://doi.org/10.1016/j.jcsr.2014.06.008
  19. Sabelli, R., Roeder, C.W. and Hajjar, J.F. (2013), NEHRP Seismic Design Technical Brief No. 8 - "Seismic design of steel special concentrically braced frame systems", NIST GCR 13-917-24.
  20. Tsai, K.C., Lai, J.W., Hwang, Y.C., Lin, S.L. and Weng, C.H. (2004), "Research and application of double-core buckling restrained braces in Taiwan", Proceeding of the 13th World Conference on Earthquake Engineering, Vancouver, BC, Canada, August, Paper No. 2179.
  21. Watanabe, A., Hitomi, Y., Saeki, E., Wada, A. and Fujimoto, M. (1988), "Properties of brace encased in buckling-restraining concrete and steel tube", Proceedings of Ninth World Conference on Earthquake Engineering, Tokyo-Kyoto, Japan, August, Volume 04, pp. 719-724.
  22. Zona, A., Ragni, L. and Dall'Asta, A. (2012), "Sensitivity-based study of the influence of brace over-strength distributions on the seismic response of steel frames with BRBs", Eng. Struct., 37, 179-192. https://doi.org/10.1016/j.engstruct.2011.12.026

피인용 문헌

  1. Local and global buckling condition of all-steel buckling restrained braces vol.23, pp.2, 2017, https://doi.org/10.12989/scs.2017.23.2.217
  2. Seismic performance evaluation of buckling restrained braced frames (BRBF) using incremental nonlinear dynamic analysis method (IDA) vol.13, pp.6, 2015, https://doi.org/10.12989/eas.2017.13.6.531
  3. The effects of beam-column connections on behavior of buckling-restrained braced frames vol.28, pp.3, 2015, https://doi.org/10.12989/scs.2018.28.3.309
  4. Behavior of three-tube buckling-restrained brace with circumference pre-stress in core tube vol.30, pp.2, 2015, https://doi.org/10.12989/scs.2019.30.2.081