DOI QR코드

DOI QR Code

Behavior of gusset plate-T0-CCFT connections with different configurations

  • Hassan, M.M. (Faculty of Engineering (Steel Department), Cairo University) ;
  • Ramadan, H.M. (Faculty of Engineering (Steel Department), Cairo University) ;
  • Naeem, M. (Faculty of Engineering (Structural Department), Cairo University) ;
  • Mourad, S.A. (Faculty of Engineering (Steel Department), Cairo University)
  • 투고 : 2012.12.13
  • 심사 : 2014.04.16
  • 발행 : 2014.11.25

초록

Concrete-filled steel tube (CFT) composite columns, either circular (CCFT) or rectangular (RCFT), have many economical and aesthetic advantages but the behavior of their connections are complicated. This study aims to investigate, through an experimental program, the performance and behavior of different connections configurations between circular concrete filled steel tube columns (CCFT) and gusset plates subjected to shear and axial compression loadings. The study included seventeen connection subassemblies consisting of a fixed length steel tube and gusset plate connected to the tube end with different details tested under half cyclic loading. A notable effect was observed on the behavior of the connections due to its detailing changes with respect to capacity, failure mode, ductility, and stress distribution.

키워드

참고문헌

  1. AISC (2010), Draft Specification for Structural Steel Buildings, ANSI/AISC 360-10, American Institute of Steel Construction, Inc., Chicago, IL, USA, August.
  2. Denavit, M.D. and Hajjar, J.F. (2012), "Nonlinear seismic analysis of circular concrete-filled steel tube members and frames", J. Struct. Eng., ASCE, 138(9), 1089-1098. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000544
  3. Gross, J.L. (1990), "Experimental study of gusseted connections", Eng. J., AISC, 27(3), 89-97.
  4. Hajjar, J.F., Denavit, M.D., Perea, T. and Leon, R.T. (2012), "Seismic design and stability assessment of composite framing systems", Proceedings of 2012 Urban Earthquake Engineering, Tokyo, Japan, March.
  5. Hassan, M.M., Ramadan, H.M., Abdel-Mooty, M. and Mourad, S.A. (2013), "Cyclic behavior of beambracing-CFT column connections in concentrically braced frames", Doctor of Philosophy Thesis, Cairo University, Faculty of Engineering, Cairo, Egypt.
  6. Hassan, M.M., Ramadan, H.M., Abdel-Mooty, M. and Mourad, S.A. (2013), "Behavior of concentrically loaded CFT braces connections", J. Adv. Res., Cairo University, 5, 243-252.
  7. Hu, T., Chen, W. and Huang, Y. (2011), "Nonlinear finite element analysis of CFT-to-bracing connections subjected to axial compressive forces", Eng. Struct., 33(5), 1479-1490. https://doi.org/10.1016/j.engstruct.2011.01.018
  8. Jacobs, W.P. and Hajjar, J.F. (2010), "Load transfer in composite construction", Proceedings of 2010 ASCE/SEI Structures Congress, Orlando, FL, USA, May.
  9. Leon, R.T. Kim, D.K. and Hajjar, J.F. (2007), "Limit state response of composite columns and beam-columns", Eng. J., AISC, 44(4), 341-358.
  10. MacRae, G.A., Roeder, C.W., Gunderson, C.A. and Kimura, Y. (2004), "Brace-beam-column connections for concentrically braced frames with concrete filled tube columns", J. Struct. Eng., ASCE, 130(2), 233-243. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(233)
  11. Roeder, C.W., MacRae, G.A., Gunderson, C.A. and Lehman, D.E. (2003), "Seismic design criteria for CFT braced frame connections", Proceedings of 2003 International Workshop on Steel and Concrete Composite Construction, Taipei, Taiwan, October.
  12. Roeder, C.W., Lehman, D.E. and Yoo, J.H. (2004), "Performance-based seismic design of braced-frame gusset plate connections", ECCS/AISC Workshop: Connections in Steel Structures, pp. 167-176.
  13. Tsai, K.C. and Hsiao, P.C. (2008), "Seismic performance of buckling-restrained braces and connections", Earthq. Eng. Struct. D., 37(7), 1099-1115. https://doi.org/10.1002/eqe.803
  14. Whitmore, R.E. (1952), "Experimental investigation of stresses in gusset plates", Bulletin No. 16, Engineering Experiment Station, University of Tennessee, Knoxville, TN, USA.
  15. Yam, M.C.H. and Cheng, J.J.R. (2002), "Behavior and design of gusset plate connections in compression", J. Const. Steel Res., 58(5-8), 1143-1159. https://doi.org/10.1016/S0143-974X(01)00103-1
  16. Zhang, J., Mark, D.D., Hajjar, J.F. and Lu, X. (2012), "Bond behavior of concrete-filled steel tube (CFT) structures", Eng. J., AISC, 49(4), 169-185.

피인용 문헌

  1. Inelastic buckling and post-buckling behavior of gusset plate connections vol.22, pp.2, 2016, https://doi.org/10.12989/scs.2016.22.2.411
  2. A parametric investigation on the hysteretic behaviour of CFT column to steel beam connections vol.55, pp.1, 2015, https://doi.org/10.12989/sem.2015.55.1.205
  3. Experimental and numerical study of one-sided branch plate-to-circular hollow section connections vol.19, pp.4, 2015, https://doi.org/10.12989/scs.2015.19.4.877
  4. An Analytical Study of Square CFT Columns in Bracing Connection Subjected to Axial Loading vol.2018, pp.1687-8094, 2018, https://doi.org/10.1155/2018/8618937
  5. Study on the effects of various mid-connections of x-brace on frame behavior vol.12, pp.4, 2017, https://doi.org/10.12989/eas.2017.12.4.449
  6. Cyclic Behavior of Steel Beam to CFT Column Connections with Gusset Plates vol.2019, pp.None, 2014, https://doi.org/10.1155/2019/3798671
  7. Behavior of composite CFST beam-concrete column joints vol.37, pp.1, 2014, https://doi.org/10.12989/scs.2020.37.1.075
  8. Full-scale tests on two-story SCBFs with Through-Gusset Plate in brace-to-CFT column connections vol.187, pp.None, 2021, https://doi.org/10.1016/j.jcsr.2021.106946