한국건설순환자원학회논문집 (Journal of the Korean Recycled Construction Resources Institute)

한국건설순환자원학회 (Korean Recycled Construction Resources Institute)
권호 표지
DOI QR코드

DOI QR Code

재활용 플라스틱 섬유보강 콘크리트의 역학적 특성

The Mechanical Properties of Recycled Plastic Fiber-Reinforced Concrete

  • Yang, In-Hwan (Department of Civil Engineering, Kunsan National University)
  • 투고 : 2014.09.15
  • 심사 : 2014.09.18
  • 발행 : 2014.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

이 연구에서는 재활용 플라스틱 섬유 (recycled plastic fibers)로 보강된 콘크리트의 역학적 특성을 파악하고자 하였다. 부피비 0, 0.5, 1.0, 1.5 및 2.0%의 섬유비를 갖는 재활용 섬유보강 콘크리트의 역학특성 실험결과를 분석하였다. 섬유보강 콘크리트의 압축강도, 탄성계수, 인장강도와 길이변화 특성 실험을 수행하였다. 실험결과는 섬유비가 증가함에 섬유보강 콘크리트의 압축강도와 탄성계수는 증가하는 것을 나타낸다. 또한, 재활용 섬유보강 콘크리트는 일반콘크리트에 비해 쪼갬인장강도, 휨인장강도, 균열개구변위 및 길이변화에 우수한 특성을 나타낸다. 연구결과는 추후 재활용 플라스틱 섬유보강 콘크리트의 재료 모델을 위한 실제적인 기초실험자료로 활용될 수 있을 것으로 사료된다.

This paper concerns the mechanical properties of recycled plastic fiber-reinforced concrete. It presents experimental research results of recycled fiber-reinforced concrete with fiber volume fractions of 0, 0.5, 1.0, 1.5, and 2%. Experiments were performed to measure mechanical properties such as compressive strength, elastic modulus, tensile strength, and length changes. The results show that both compressive strength and elastic modulus decreased as fiber volume fraction increased. In addition, the experimental results show that recycled fiber-reinforced concrete is in favor of split tensile strength, flexural tensile strength, characteristic regarding crack mouth opening displacement, and length changes. The results of this study can be used to provide realistic information for modeling of mechanical properties in recycled plastic fiber-reinforced concrete in the future.

키워드

참고문헌

  1. Balaguru, P.N., Shah, S.P., (1992). Fiber reinforced cement composites, McGraw-Hill, 530 p.
  2. Batayneh, M., Marie, I., Asi, I. (2007), Use of selected waste materials in concrete mixes, Waste Management, 27, 1870-1876. https://doi.org/10.1016/j.wasman.2006.07.026
  3. Bayasi, Z., Zeng, J., (1993). Properties of polypropylene fiber reinforced concrete, ACI Materials Journal, 90(6), 605-610.
  4. Casanova, P., Rossi, P. (1999), Analysis of metallic fibre-reinforced concrete beams submitted to bending, Materials and Structures, 29(190), 354-361.
  5. Fraternali, F. Ciancia, V., Chechile, R., Rizzano, G., Feo, L., Incarnato, L. (2011). Experimental study of the thermomechanical properties of recycled PET fiber-reinforced concrete, Composite Structures, 93, 2368-2374. https://doi.org/10.1016/j.compstruct.2011.03.025
  6. Kim, S.B., Yi, N.H., Kim, H.Y. Kim, J.H.J., Song, Y.S. (2010). Material and structural performance evaluation of recycled PET fiber reinforced concrete, Cement & Concrete Composites, 32, 232-240. https://doi.org/10.1016/j.cemconcomp.2009.11.002
  7. Li, V.C., Fischer, G. (2002), Reinforced ECC - an evolution from materials to structures, Proceedings of the 1st fib congress - Concrete Structures in the 21st Century, 105-122.
  8. Meyer, C. (2009), The greening of the concrete industry, Cement & Concrete Composites, 31, 601-605. https://doi.org/10.1016/j.cemconcomp.2008.12.010
  9. Naaman, A.E., Reinhardt, H.W. (2006), Proposed classification of HPFRC composites based on their tensile response, Materials and Structures, 39, 547-555.
  10. Ochi, T., Okubo, S., Fukui, K. (2007). Development of recycled PET fiber and its application as concrete-reinforcing fiber, Cement & Concrete Composites, 29, 448-455. https://doi.org/10.1016/j.cemconcomp.2007.02.002
  11. Olivaresa, F.H., Barluengab, G. (2004), Fire performance of recycled rubber-filled high-strength concrete, Cement and Concrete Research, 34, 109-117. https://doi.org/10.1016/S0008-8846(03)00253-9
  12. Siddique, R., Khatib, J., Kaur, I. (2008). Use of recycled plastic in concrete: A review, Waste Management, 28, 1835-1852. https://doi.org/10.1016/j.wasman.2007.09.011
  13. Soroushian, P., Plasencia, J., Ravanbakhsh, S., (2003). Assessment of reinforcing effects of recycled plastic and paper in concrete, ACI Materials Journal, 100(3), 203-207.
  14. Yang, I.H., Joh, C. Kim, B.S. (2010), Structural behavior of ultra high performance concrete beams subjected to bending, Engineering Structures, 32(11), 3478-3487. https://doi.org/10.1016/j.engstruct.2010.07.017
  15. Yang, I.H., Joh, C.B., Kim, B.S. (2011), Flexural strength of large scale ultra high performance concrete prestressed T-beams, Canadian Journal of Civil Engineers, 38(11), 1185-1195. https://doi.org/10.1139/l11-078