Korean Journal of Computational Design and Engineering (한국CDE학회논문집)

Society for Computational Design and Engineering (한국CDE학회)
권호 표지
DOI QR코드

DOI QR Code

Model-Driven Design Framework for Future Combat Vehicle Development based on Firepower and Mobility: (1) Integrated Performance Modeling

화력과 기동의 통합성능을 고려한 미래 전투차량의 해석 기반 설계 프레임웍 연구: (1) 통합성능분석 모델개발

  • 임성훈 (한양대학교 미래자동차공학과) ;
  • 임우철 (한양대학교 미래자동차공학과) ;
  • 민승재 (한양대학교 미래자동차공학과) ;
  • 이태희 (한양대학교 미래자동차공학과) ;
  • 류재봉 (국방과학연구소) ;
  • 변재정 (국방과학연구소)
  • Received : 2014.09.15
  • Accepted : 2014.10.24
  • Published : 2014.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper proposes the 3D modeling and simulation technique for predicting the integrated performance of combat vehicle. To consider the practical driving and firing condition of a combat vehicle, the full vehicle model, which can define the six degrees-of-freedom of vehicle motion and various firing angles, is developed. The critical design parameters such as the stiffness and damping coefficient of suspension system are applied to construct the analysis model of vehicle. A simple ballistic model, which incorporates the empirical interior ballistic model and the point mass trajectory model, is built to estimate the firing range and the firing recoil force. To predict the integrated performance and analyze the effect of system parameters, MATLAB/SIM-ULINK model of a combat vehicle for performing the real time simulation is also developed. Several simulation tests incorporating the road bump and the firing recoil force are presented to confirm the effectiveness of the proposed vehicle model.

Keywords

References

  1. Lee, S., Kim, S. and Lee, G., 2008, A Study on the Calculation of Muzzle Velocity through the Gun Barrel Pressure Measurement, Journal of the Korean Society of Propulsion Engineers, 12(5), pp.60-66.
  2. Sung, H.-G., Yoo, S.-Y., Lee, S.-B., Choi, D.-W. and Roh, T.-S., 2013, Analysis of Elements Influencing on Performance of Interior Ballistics, Journal of the Korean Society of Propulsion Engineers, 17(4), pp.16-24. https://doi.org/10.6108/KSPE.2013.17.4.016
  3. Miura, H., Matsuo, A. and Nakamura, Y., 2013, Numerical Prediction of Interior Ballistics Performance of Projectile Accelerator Using Granular or Tubular Solid Propellant, Propellants, Explosives, Pyrotechnics, 38, pp.204-213. https://doi.org/10.1002/prep.201200084
  4. Agharkakli, A., Sabet, G. S. and Barouz, A., 2012, Simulation and Analysis of Passive and Active Suspention System Using Quarter Car Model for Different Road Profile, International Journal of Engineering Trends and Technology, 3(5), pp.636-644.
  5. Cho, B.-K., Ryu, G. and Song, S.J., 2005, Control Strategy of an Active Suspension for a Half Car Model with Preview Information, International Journal of Automotive Technology, 6(3), pp.243-249.
  6. Min, K.-D. and Kim, Y.C., 2014, Three-Dimensional Dynamic Model of Full Vehicle, The Transactions of the Korean Institute of Electrical Engineers, 63(1), pp.162-172. https://doi.org/10.5370/KIEE.2014.63.1.162
  7. Lim, O-K., Choi, E.-H. and Ryoo, J.-B., 2009, Fire Power Analysis for Concept Exploration of Combat Vehicle, Journal of the Computational Structural Engineering Institute of Korea, 22(3), pp.251-258.
  8. McCoy, R.L., 1998, Modern Exterior Ballistics, Schiffer Military History.
  9. Mitra, A., Benerjee, N., Khalane, H.A., Sonawane, M.A., Joshi, D.R. and Bagul, G.R., 2013, Simulation and Analysis of Full Car Model for Various Road Profile on a Analytically Validated MATLAB/SIMULINK model, IOSR Journal of Mechanical and Civil Engineering, pp.22-33.
  10. Ryoo, J.-B., 2009, Integrated System Analysis for Concept Exploration of Combat Vehicle, Ph.D. Thesis, Pusan National University.
  11. Choi, E.-H., 2011, Multidisciplinary Design Optimization by Integrated Coupled Approximate Model, Ph.D. Thesis, Pusan National University.

Cited by

  1. Model-Driven Design Framework for Future Combat Vehicle Development based on Firepower and Mobility: (2) Integrated Design Optimization vol.19, pp.4, 2014, https://doi.org/10.7315/CADCAM.2014.324