한국표면공학회지 (Journal of the Korean institute of surface engineering)

  • 제47권5호
  • /
  • Pages.215-220
  • /
  • 2014
  • /
  • 1225-8024(pISSN)
  • /
  • 2288-8403(eISSN)
한국표면공학회 (The Korean Institute of Surface Engineering)
권호 표지
DOI QR코드

DOI QR Code

에틸렌디아민을 착화제로 사용하는 팔라듐-니켈 합금도금

Palladium-Nickel Alloy Electrodeposition Using Ethylenediamine as Complexing Agent

  • 최병하 (경북대학교 신소재공학부 금속신소재공학전공) ;
  • 손호상 (경북대학교 신소재공학부 금속신소재공학전공) ;
  • 김경태 (재료연구소 분말기술연구실) ;
  • 손인준 (경북대학교 신소재공학부 금속신소재공학전공)
  • Choi, Byungha (Department of Materials Science and Metallurgy, Kyungpook National University) ;
  • Sohn, Ho-Sang (Department of Materials Science and Metallurgy, Kyungpook National University) ;
  • Kim, Kyung Tae (Powder & Ceramic Materials Division, Korea Institute of Materials Science) ;
  • Son, Injoon (Department of Materials Science and Metallurgy, Kyungpook National University)
  • 투고 : 2014.10.20
  • 심사 : 2014.10.28
  • 발행 : 2014.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Electrodeposition behaviors of Pd-Ni alloys were investigated from the polarization curves in a solution containing ethylenediamine as complexing agent. The microstructure and hardness of electrodeposited Pd-Ni alloys were also characterized. Codeposition of Pd-Ni alloys was successfully performed in the wide current density ranging from 2 to $5000A{\cdot}m^{-2}$ because the deposition potential of Pd became close to that of Ni in the ethylenediamine-contained solution. It was also found from X-ray diffraction patterns that the solid solution between Pd and Ni was formed with variation of the composition of alloys. The measured hardness of Pd-Ni alloys increased with increasing the contents of Ni due to solid solution strengthening and grain refinement. The electrodeposited Pd-Ni alloys also exhibited a crack free smooth surface morphology from the SEM observation.

키워드

참고문헌

  1. C. S. Back, H. K. Chang, H. C. Kim, Kor. Inst. Surf. Eng., 25 (1992) 107.
  2. J. G. Han, T. M. Kang, Kor. Inst. Surf. Eng., 25 (1992) 309.
  3. M. Antler, IEEE Trans. Components, Hybrids, Manuf. Technol., CHMT-10, (1987) 420.
  4. H. S. Yu, M. J. Oh, H. B. Park, J. Adv. Navig. Technol., 18(4) (2014) 381. https://doi.org/10.12673/jant.2014.18.4.381
  5. S. Umemura, K. Yasuda, T. Aoki, IEEE Trans. Comp., Hybrids, Manuf., Technol., 14 (1991) 181. https://doi.org/10.1109/33.76529
  6. J. P. Yue, F. Z. Yang, Z. Q. Tian, S. M. Zhou, Trans. Inst. Met. Fin., 64(2) (1986) 62.
  7. S. Uemiya, T. Endo, R. Yoshiie, W. Katoh, T. Kojima, Mater, Trans., 48(5) (2007) 1119. https://doi.org/10.2320/matertrans.48.1119
  8. J. A. Abys, G. F. Breck, H. K. Straschil, I. Boguslavsky, G. Holmbom, Plat. and Surf. Fin., 86 (1998) 108.
  9. Z. Ratajewicz, C. Saneluta, Plat. and Surf. Fin., 84(11) (1997) 60.
  10. J. A. Abys, J. J. Maisano, I. V. Kadija, E. J. Kudrak, S. Nakahara, Plat. and Surf. Fin., 83 (1996) 43.
  11. P. Wikinson, Trans. Inst. Met. Fin., 60(4) (1982) 152. https://doi.org/10.1080/00202967.1982.11870624
  12. K. J. Whitlaw, Trans. Inst. Met. Fin., 60(4) (1982) 141. https://doi.org/10.1080/00202967.1982.11870622
  13. A. H. Graham, M. J. Pike-Biegunski, S. W. Updegrafb, Plating, 70(11) (1983) 52
  14. Y. Fukumoto, Y. Kawashima, T. Hayashi, Plat. and Surf. Fin., 73(3) (1986) 62.
  15. W. Zhang, M. Clauss, J. Guebey, F. Schwager, Met. Fin., 107 (2009) 22.
  16. S. Berger, U. Manz, F. Oberst, Met. Fin., 108 (2010) 29. https://doi.org/10.1016/S0026-0576(10)80076-5
  17. A. Brenner, Electrodeposition of Alloys, Vols. 1 & 2, Academic Press (1963) 76.
  18. J. A. Abys, H. K. Straschil, I. Kadija, E. J. Kudrak, J. Blee, Met. Fin., 89 (1991) 43.
  19. R. Dedoncker, J. Vanbumbeeck, Trans. Inst. Met. Fin., 63 (1985) 59. https://doi.org/10.1080/00202967.1985.11870708
  20. R. G. Baker, T. A. Palumbo, Plating, 58(8) (1971) 791.

피인용 문헌

  1. A Study on Characteristics of the Ni-Pd Alloy Electroplating vol.48, pp.6, 2015, https://doi.org/10.5695/JKISE.2015.48.6.253