Abstract
This study was conducted to compare the commercial noodle flours (n=8) of each milling company in Korea. Eight noodle flour samples were classified into two types of flours, all-purpose flour (AF, n=4) and premium noodle flour (PF, n=4) and tested using general component analysis. Texture assessment and sensory test for doughs and noodles were performed. The dough strength was positively correlated with lower ash content, smaller particle size and longer formation time. Sensory evaluation found that weaker cooked noodle strength correlated with higher scores in preference and softness. As a result, it can be suggested that PF is better than AF in noodle making because PF has lower ash content and smaller particle size than AF. As such, flour characteristics that produce noodle flour of uniform quality can be obtained by combining flours with the above processing characteristics to fit the qualities desired.
국내 시판되는 각 제분사별 면용밀가루(n=8) 중에서 중력밀가루(AF, n=4)와 고급면용밀가루(PF, n=4)를 일반성분분석과 입도, 반죽특성, Texture analyzer, 관능검사를 통하여 비교하였다. 조단백질함량은 AF, PF가 각각 평균 8.97~9.26%, 8.53~9.06%로 나타났고, 조회분함량은 AF, PF가 각각 0.38~0.40%, 0.35~0.39%로 PF가 단백질함량, 0.20~0.45%, 회분함량, 0.01~0.03%가 AF보다 낮은 결과였다. 국내에서 면용에 주로 이용되는 밀가루의 입도는 $47.5{\sim}56.5{\mu}m$의 범위임을 알 수 있었다. Farinogram의 흡수율은 AF가 57.08~59.70%, PF는 58.00~61.50%의 결과를 보여 PF가 1~2% 높은 흡수율임을 나타냈다. 형성시간은 AF가 1분20초~2분, PF는 5분-8분의 결과로 PF가 약 3분40초~6분 긴 형성시간의 특성을 보였다. 최고점도는 AF가 660~839 BU, PF는 667~983 BU의 범위를 보였다. Texture analyzer 측정값의 견고도, 부착성, 검성 모두 밀가루 종류별 차이보다는 제분사별 차이를 보여 제조공정 조건의 차이에 따른 영향으로 판단할 수 있었다. 관능검사 결과 부드러운 정도와 기호도는 PF가 AF보다 좋게 평가되었다. 상관관계의 결과와 같이 회분함량이 낮을수록, 입도가 작을수록, 반죽형성시간이 길수록, 강력도가 높고, 약화도가 작을수록, 부드러움이 좋았으며, 기호도가 높음을 알 수 있었다. 이와 같은 결과에 따라 회분함량이 높은 AF(중력밀가루)보다 회분함량이 낮으며 입도가 작은 PF(고급면용밀가루)가 생면용에 우수하다는 결과를 얻을 수 있었다.