The Journal of the Korea institute of electronic communication sciences (한국전자통신학회논문지)

Korea Institute of Electronic Communication Science (한국전자통신학회)
권호 표지
DOI QR코드

DOI QR Code

Equivalent Parameter Modeling of Open Ring type DGS Resonator

분리된 링형 DGS 공진기의 등가 파라미터 모델링

  • 문승민 (신라대학교 전자공학과) ;
  • 김기래 (신라대학교 전자공학과)
  • Received : 2014.08.04
  • Accepted : 2014.10.17
  • Published : 2014.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, the open ring type DGS(Defected Ground Structure) resonator, applicable to MMIC(Monolithic Microwave Integrated Circuit), is proposed to improve phase noise characteristics of RF oscillator. This resonator is planar type, therefore, it easy to design miniaturrized., and takes relatively high Q value. Modeling the equivalent parameter of resonator is needed, when designing the RF oscillator with resonator. The mathematical method to solve the equivalent parameter of the resonator from the measured results of resonator is introduced in this paper. To verify the method, DGS resonator with 5.8 GHz center frequency is fabricated, for measuring characteristics and calculating the equivalent parameter. The result from this process is compared with the data of the ADS simulation, and as a result both were identical.

본 논문에서는 발진기의 위상잡음을 개선하고 MMIC(Monolithic Microwave Integrated Circuit)에 적용 가능하도록 설계된 분리된 링형 DGS(Defected Ground Structure)공진기를 제안한다. 이것은 평면형 공진기로서 소형화 설계가 용이하고 상대적으로 높은 Q 값을 갖는다. 공진기를 이용하여 초고주파 발진기를 설계할 때 공진기의 등가 파라미터를 모델링하는 것이 필요하다. 본 논문에서는 발진기의 설계에 필요한 공진기의 등가회로 파라미터를 공진기의 측정된 특성 값으로부터 수식적으로 계산하는 방법을 나타내었다. 방법을 검증하기 위해 공진주파수가 5.8 GHz인 링형 DGS 공진기를 제작하여 특성을 측정하고 등가 파라미터를 계산하였고, 이 결과를 ADS 도구를 이용하여 시뮬레이션한 결과와 비교하여 일치함을 보였다.

Keywords

References

  1. M. Lee, K. Ryu, and I. Yeom, "Phase Noise Reduction of Microwave HEMT Oscillators Using a Dielectric Resonator Coupled by a High Impedance Inverter," ETRI J., vol. 23, no. 4, Dec. 2001, pp. 199-201. https://doi.org/10.4218/etrij.01.0201.0401
  2. K. Hosoya, S. Tanaka, Y. Amamiya, and K. Jonjo, "A low phase noise 38 [GHz] HBT MMIC oscillator utilizing a novel transmission line resonator," 2000 IEEE MTT-S Dig. Boston, MA, 2000, pp. 47-50.
  3. E. Holtzman, Solid State Microwave Power Oscillator Design. New york : Artech House, 1992.
  4. D. Ahn, C. S. Kim, and J. S. Park, "Effect of a Lumped Element on Defected Ground Structure," EUMC, London, United Kingdom, vol. 2, Nov. 2000, pp. 75-78.
  5. T. Xie, G. Kim, and Y. Choi, "A Study on the Novel Rectangular Split Ring Notch Resonators," Int. J. of Information and Communication Engineering, vol. 8, no. 4, 2010, pp. 365-369. https://doi.org/10.6109/jicce.2010.8.4.365
  6. G.-R. Kim, "Design of Coupled Resonators Bandpass Filter With Defected Ground Structure," Int. J. of Information and Communication Engineering, vol. 9, no. 2, 2011, pp. 150-154. https://doi.org/10.6109/jicce.2011.9.2.150
  7. K. Yeom, Active Microwave Design theory and introduction. Seoul : Hongrling publiching company, 2008, pp. 396-499.
  8. Y. Yoon, RF active circuit design theory and practical. Seoul : Hongrling publiching company, 2005, pp. 74-95.
  9. Y. Han, "Interference Cancellation System in Repeater using Adaptive algorithm with step size," J. of the Korea Institute of Electronic Communication Sciences, vol. 9, no. 5, May 2014, pp. 549-554. https://doi.org/10.13067/JKIECS.201.9.5.549
  10. E. Lim, G. Han, and Y. Rhe, "A Design of K-Band Low Phase noise Oscillator by Direct Coupling of K-band Dielectric Resonator," J. of the Korea Institute of Electronic Communication Sciences, vol. 9, no. 1, May 2014, pp. 17-23. https://doi.org/10.13067/JKIECS.2014.9.1.17
  11. G. Kim, "Design of Voltage Controlled Oscillator for X-band Radar Using CSRR loaded microstrip line," J. of the Korea Institute of Electronic Communication Sciences, vol. 8, no. 9, 2013, pp. 1277-1283. https://doi.org/10.13067/JKIECS.2013.8.9.1277