DOI QR코드

DOI QR Code

Sensorless IPMSM Drives based on Extended Nonlinear State Observer with Parameter Inaccuracy Compensation

  • Mao, Yongle (Department of Electrical Engineering, Zhejiang University) ;
  • Liu, Guiying (College of Physics and Electronic Engineering, Guangxi Teachers Education University) ;
  • Chen, Yangsheng (Department of Electrical Engineering, Zhejiang University)
  • 투고 : 2014.07.28
  • 심사 : 2014.08.02
  • 발행 : 2014.09.01

초록

This paper proposed a novel high performance sensorless control scheme for IPMSM based on an extended nonlinear state observer. The gain-matrix of the observer has been derived by using state linearization method. Steady state errors in estimated rotor position and speed due to parameter inaccuracy have been analyzed, and an equivalent flux error is defined to represent the overall effect of parameter errors contributing to the wrong convergence of the estimated rotor speed as well as rotor position. Then, an online compensation strategy was proposed to limit the estimation errors in rotor position and speed. The effectiveness of the extended nonlinear state observer is validated through simulation and experimental test.

키워드

참고문헌

  1. G. C. Zhu, A. Kaddouri, L.-A. Dessaint, and O. Akhrif, "A nonlinear state observer for the sensorless control of a permanent-magnet AC machine," IEEE Transactions on Industry Electronics, vol. 48, no. 6, pp. 1098-1108, Dec. 2001. https://doi.org/10.1109/41.969388
  2. J. Solsona, M. I. Valla, and C. Muravchik, "Nonlinear control of a permanent magnet synchronous motor with disturbance torque estimation," IEEE Transactions on Energy Conversion, vol. 15, no. 2, pp. 163-168, Jun. 2000. https://doi.org/10.1109/60.866994
  3. G. Bisheimer, M. O. Sonnaillon, C. H. De Angelo, J. A. Solsona, G. O. Garcia, "Full speed range permanent magnet synchronous motor control without mechanical sensors," IET Electric Power Applications, vol. 4, no. 1, pp. 35-44, 2010. https://doi.org/10.1049/iet-epa.2008.0187
  4. B. S. Bhangu, C. M. Bingham, "GA-tuning of nonlinear observers for sensorless control of automotive power steering IPMSMs," 2005 IEEE Conference on Vehicle Power and Propulsion, pp. 772-779.
  5. Z. Q. Chen, M. Doki, S. Tomita, S. Okuma, "An extended electromotive force model for sensorless control of interior permanent-magnet synchronous motors," IEEE Transactions on Industry Electronics, vol. 50, no. 2, pp. 288-295, Apr. 2003. https://doi.org/10.1109/TIE.2003.809391
  6. S. Koonlaboon, S. Sangwongwanich, "Sensorless control of interior permanent-magnet synchronous motors based on a fictitious permanent-magnet flux model," Industry Applications Conference, Fourtieth IAS Annual Meeting, pp. 311-318, 2005.
  7. M. Hasegawa, S. Yoshioka, K. Matsui, "Position Sensorless Control of Interior Permanent Magnet Synchronous Motors Using Unknown Input Observer for High-Speed Drives," IEEE Transactions on Industry Applications, vol. 45, no. 3, pp. 938-946, May/Jun. 2009. https://doi.org/10.1109/TIA.2009.2018968
  8. J. B. Liu, T. A. Nondahl, P. B. Schmidt, S. Royak, M. Harbaugh, "Rotor Position Estimation for Synchronous Machines Based on Equivalent EMF," IEEE Transactions on Industry Applications, vol. 47, no. 3, pp. 1310-1318, May/Jun. 2011. https://doi.org/10.1109/TIA.2011.2125935
  9. Y. Park, S.-K. Sul, J.-K. Ji, Y.-J. Park, "Analysis of Estimation Errors in Rotor Position for a Sensorless Control System Using a PMSM," Journal of Power Electronics, vol. 12, no. 5, pp. 748-757, Sep. 2012. https://doi.org/10.6113/JPE.2012.12.5.748
  10. Y. SHI, K. Sun, M. Hongyan, L. Huang, Y. Li, "Permanent magnet flux identification of IPMSM based on EKF with speed sensorless control," 36th Annual Conference on IEEE Industrial Electronics Society, IECON 2010, pp. 2252-2257, Nov. 2010.
  11. S. Ichikawa, M. Tomita, S. Doki, S. Okuma, "Sensorless Control of Synchronous Reluctance Motors Based on Extended EMF Models Considering Magnetic Saturation With Online Parameter Identification," IEEE Transactions on Industry Applications, vol. 42, no. 5, pp. 1264-1274, Sep./Oct. 2006. https://doi.org/10.1109/TIA.2006.880848
  12. S. Morimoto, M. Sanada, Y. Takeda, "Effects and Compensation of Magnetic Saturation in Flux- Weakening Controlled Permanent Magnet Synchronous Motor Drives," IEEE Transactions on Industry Applications, vol. 30, no. 6, pp. 1632-1637, Nov./Dec. 1994. https://doi.org/10.1109/TIA.1994.350318
  13. K. Tatematsu, D. Hamada, K. Uchida, S. Wakao, T. Onuki, "Sensorless control for permanent magnet synchronous motor with reduced order observer," 29th Annual IEEE Power Electronics Specialists Conference, vol. 1, pp. 125-131, May. 1998.
  14. H. Matsuno, A. Moran, M. Hayase, "Design of controllers and observers for mimo nonlinear systems," Proceedings of the 35th SICE Annual Conference. International Session Papers, pp. 1059-1064, 1996.
  15. A. Isidori, Nonlinear Control Systems, 3rd ed., Springer-Verlag, 1995.
  16. Z. Q. Zhu, Y. S. Chen, D. Howe, "Online optimal fluxweakening control of permanent-magnet brushless AC drives," EEE Transactions on Industry Applications, vol. 36, no. 6, pp. 1661-1668, Nov./Dec. 2000. https://doi.org/10.1109/28.887219
  17. A. R. Munoz, T. A. Lipo, "On-line dead-time compensation technique for open-loop PWM-VSI drives," IEEE Transactions on Power Electronics, vol. 14, no. 4, pp. 683-689, Jul. 1999. https://doi.org/10.1109/63.774205
  18. J.-W. Choi, S.-K. Sul, "Inverter output voltage synthesis using novel dead time compensation," IEEE Transactions on Power Electronics, vol. 11, no. 2, pp. 221-227, Mar. 1996. https://doi.org/10.1109/63.486169
  19. D. Salt, D. Drury, D. Holliday, A. Griffo, P. Sangha, A. Dinu, "Compensation of inverter nonlinear distortion effects for signal injection based sensorless control," EEE Transactions on Industry Applications, vol. 47, no. 5, pp. 2084-2092, Sep./Oct. 2011. https://doi.org/10.1109/TIA.2011.2161430
  20. B.-H. Bae, S.-K. Sul, "A compensation method for time delay of full-digital synchronous frame current regulator of PWM AC drives," EEE Transactions on Industry Applications, vol. 39, no. 3, pp. 802-810, Nov./Dec. 2003 https://doi.org/10.1109/TIA.2003.810660