DOI QR코드

DOI QR Code

An Experimental Study on Compressive Strength Properties of High Temperature Curing Method of High-strength Concrete

고강도 콘크리트 고온양생 방법의 압축강도 특성에 관한 실험적 연구

  • Received : 2014.04.03
  • Accepted : 2014.10.10
  • Published : 2014.10.30

Abstract

Greater emphasis is given to the reduced period of construction and the performance of concrete following recent trend of high-rise and large-sized buildings. Especially, the focus is on the management of concrete quality in the early stages regarding reduced construction period. Domestic and foreign studies have already examined the technique of accelerating the hardness to check the quality of the concrete in a short period of time such as hot water curing and microwave irradiation as a method to check the concrete quality in the early stage. However, there are not many studies that considered such techniques on ultra-high strength concrete. To examine ultra-high strength concrete, tests were conducted on following settings: W/B 20.7%, 80MPa strength for unit quantity $155kg/m^2$, and curing in hot water heated to 20, 40, 60, and $80^{\circ}C$ using curing water tank. Three specimens were produced for each age and the mean value was taken for compression strength to reduce error, and mock-up specimens (column, wall) were produced, the core was extracted using KS F 2422 (Method of Obtaining and Testing Drilled Cores and Sawed Beams of Concrete) for the comparison with heated specimen for each age, and the compression strength was measured three times for each age to review field applicability. Also, it appeared that the distribution of pores and hydration products which appears to have impact on the concrete strength was not fully considered, and therefore, the generation and distribution of micropores were observed using mercury intrusion porosimeter and the distribution of microtissue was observed using scanning electron microscope (SEM) to increase the accuracy of the test.

Keywords

References

  1. 이종석, "온수양생을 이용한 초고강도 콘크리트의 강도 조기 추정에 관한 실험적 연구", 대한건축학회지, 2011
  2. 이종석, "50, 60 $^{\circ}C$ 온수양생을 이용한 초고강도 콘크리트의 강도 조기 평가", 한국건축시공학회 학술, 2011
  3. 여상길, "온수양생을 이용한 초고강도 섬유보강콘크리트의 강도 조기 추정에 관한 연구", 대한건축학회 논문집, 2012
  4. 정상진, "초고강도 콘크리트의 수직, 수평부재 현장 적용성을 위한 역학적 특성에 관한 연구", 대한건축학회 논문집, 2011, 제 27권 8호, p.p.105-112
  5. 콘크리트공학, 최신콘크리트공학, 2005
  6. KSF 2827, 콘크리트 생산 공정 관리용 시험방법(온수양생), KS 규정집, 2006
  7. 한천구, "미분 시멘트의 미세구조 분석 및 이를 사용한 콘크리트의 공학적 특성", 대한건축학회 논문집, 2009
  8. 이성용, "실존 콘크리트 구조체의 코어강도에 관한 연구", 인천대학교 석사학위논문, 2003
  9. 한민철, "고온조건이 고강도 콘크리트의 역학적 특성 및 미세구조에 미치는 영향", 대한건축학회지, 2011
  10. 태순호, "고온에 노출된 콘크리트 미세조직의 특성", 한국화재소방학회논문지, 1998
  11. 이규동, "양생온도가 고로슬래그 콘크리트의 미세구조에 미치는 영향", 한국콘크리트학회 추계논문집, 2006
  12. 한국콘크리트학회, 최신 콘크리트공학, p.471, 기문당, 2007
  13. PK 메타 15. P.K. Mehta, Concrete, structure, properties and materials. Prentice Hall, Vol. 1, p.25, 1973