한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제13권4호
  • /
  • Pages.75-82
  • /
  • 2014
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

Strain Gauge를 이용한 핀형 로드셀 개발

Development of the Pin Type Load-cell Using Strain Gauge

  • Lee, Dong-Wook (School of Mechanical Engineering, Gyeongsang National UNIV.) ;
  • Park, Min-Hyuk (School of Mechanical Engineering, Gyeongsang National UNIV.) ;
  • Lee, Gye-Gaong (Mirae Industry) ;
  • Kim, In-Hwan (School of Mechanical Engineering, Gyeongnam National UNIV. of Science and Technology) ;
  • Lee, Seok-Soon (School of Mechanical Engineering, Gyeongsang National UNIV.)
  • 투고 : 2014.07.14
  • 심사 : 2014.08.08
  • 발행 : 2014.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A pin-type load-cell which uses shear-type strain gauges was developed to measure the tension of a wire in a winch. A finite element analysis was performed to determine the locations of the strain gauges. All of the shear-type strain gauges were attached onto parts that undergo regularly shear stress distributions. A Wheatstone bridge circuit was used to connect each of the gauges and to measure the strains. Linearity within the 5% error range was noted when testing the pin-type load-cell.

키워드

참고문헌

  1. Hae-Jun Seo, Haing-Sup Jung, Gi-Ju Ryu, Tae-Won Cho, "High Accurate Creep Compensation of the Loadcell using the Strain Gauge", Vol. 16 No. 1 IKEEE, pp.34-44 2012 https://doi.org/10.7471/ikeee.2012.16.1.034
  2. Sung-il Chu, Jun-hyub Park, Jin-gun Lee, Ji-young Park, "Development of 3-axis Loadcell for Measuring the Side Force of MPV Using Design of Expertiment", Vol. 15 No. 4 KSAM, pp.83-93 2007
  3. J Lee, C Song, S Park, "Design of Triaxial Load Cell by Finite Element Analysis" Korean Society for Precision Engineering, pp.635-636,Apr 2010.11
  4. Dong-Seop Han, Jeong-Min Ha, Geun-Jo Han, "Creative Design of Large-Angle Pin Type Load Cell for the Overload Limiter of a Movable Crane", Journal of the Korean Society of Manufacturing Process Engineers, Vol.9 No.1,pp.35-41, 2010.02
  5. Jong-Il Bae, Chi-Kook Ryu, "On Study for Digital Load Cell using Zig-Bee" The Korean Society of Manufacturing Process Engineering, pp.218-221 ,Apr 2007.06
  6. "Strain Gauge Manual", http://www.radian21.com
  7. "Principle of the column load cell of TECHNOLOGY Strain Gage Based Transducers", http://www.measurementsgroup.com, pp.52
  8. Gab-Soon Kim, Se-Hun Rhee, Ki-Woan Um, "Development of a Precision 3-component Load Cell", A Vol. 22 No. 10 KSME, pp.1850-1857 1998.10