References
- Zhao. F., Harrington. D. L. and Lai. N., "Automotive Gasoline Direct-Injection Engines", SAE, 2002.
- Heywood. B., "Internal Combustion Engine Fundamentals", McGRAW-Hill, 1989.
- David. B., Kittelson, "Engine and Nanoparticles A Review", J. of Aerosol Sci., Vol. 29 No. 5-6, pp. 575-588, 1998. https://doi.org/10.1016/S0021-8502(97)10037-4
- Taylor. J., Fraser, N. and Wieske. P., "Water Cooled Exhaust Manifold and Full Load EGR Technology Applied to a Downsized Direct Injection Spark Ignition Engine", SAE Int. J. Engines, Vol. 3 No. 1, pp. 225-240, 2010. https://doi.org/10.4271/2010-01-0356
- Kirwan. J., Shost. M., Roth. G. and Zizelman. J., "3-Cylinder Turbocharged Gasoline Direct Injection: A High Value Solution for Low CO2 and NOx Emissions", SAE Int. J. Engines, Vol. 3 No. 1, pp. 355-371, 2010. https://doi.org/10.4271/2010-01-0590
- T. Pauly., S. Franoschek., R. Hoyer and S. Eckhoff, "Cost and Fuel Economy Driven Aftertreatment Solutions for Lean GDI", SAE Technical Paper. 2010-01-0363, 2010.
- Park. S. H., Kim. H. J., Suh. H. K. and Lee. C. S., "Atomization and Spray Characteristics of Bioethanol and Bioethanol Blended Gasoline Fuel Injected through a Direct Injection Gasoline Injector", Int. J. Heat and Fluid Flow, Vol. 30 No. 6, pp. 1183-1192, 2009. https://doi.org/10.1016/j.ijheatfluidflow.2009.07.002
- Kim. S. W. and Donotzuka., "Actual Status of Metal Injection Molding Technology", J. of KSHT, Vol. 13 No. 2, pp. 126-131, 2000.
- Koo. Y. D., Kil. S. C. and Na. D. B., "Metal Powder Injection Molding", KISTI, pp. 4-34, 2002.
Cited by
- Metal Injection Molding Analysis for Developing Embroidering Machine Rotary Hooks vol.17, pp.4, 2018, https://doi.org/10.14775/ksmpe.2018.17.4.160