참고문헌
- J. R. Lamarsh and A. J. Baratta, Introduction to Nuclear Engineering; pp. 623-30, Prentice Hall, New Jersey, 2009.
- Y. Katoh, T. Nozawa, and L. L. Snead, "Mechanical Properties of Thin Pyrolitic Carbon Interphase SiC-Matrix Composites Reinforced with Near-stoichiometric SiC Fibers," J. Am. Ceram. Soc., 88 [11], 3088-95 (2005). https://doi.org/10.1111/j.1551-2916.2005.00546.x
- H. Feinroth, M. Ales, E. Barringer, G. Kohse, D. Carpenter, and R. Jaramillo, Mechanical Strength of CTP Triplex SiC Fuel Clad Tubes after Irradiation in MIT Research Reactor under PWR Coolant Conditions; pp. 47-58, in Silicon Carbide and Carbon Composites, Vol. 30, Ceramic Engineering and Science Proceeding, Ed. by Y. Katoh and A. Cozzi, John Wiley & Sons, New Jersey, 2009.
- A. Kohyama, M. Kotani, Y. Katoh, T. Nakayasu, M. Sato, T. Yamamura, and K. Okamura, "High-performance SiC/SiC Composite by Improved PIP Processing with New Precursor Polymers," J. Nucl. Mater., 238-287, 565-69 (2000).
-
Y.-H. Ji, I.-S. Han, S. Kim, D.-W. Seo, K-S. Hong, and S.-K. Woo, "Effects of Carbon Fiber Arrangement on Properties of LSI
$C_f$ -Si-SiC Composites(in Korean)," J. Kor. Ceram. Soc., 45 [9], 561-66 (2008). https://doi.org/10.4191/KCERS.2008.45.9.561 -
J. Y. Park, S. M. Kang, L. H. Park, W.-J. Kim, and W. S. Ryu, "Effect of SiC Whisker Growing on Matrix Filling of the SiC
$_f$ /SiC Composite," Ceram. Eng. Sci. Proc., 24 [4], 613-20 (2003). https://doi.org/10.1002/9780470294826.ch89 -
H.-W. Yu, K. Raju, J. Y. Park, and D.-H. Yoon, "Effects of
$Al_2O_3-Re_2O_3$ Additive for the Sincerting of SiC and the Fabrication of SiC$_f$ /SiC Composite(in Korean)," J. Kor. Ceram. Soc., 50 [6], 364-71 (2013). https://doi.org/10.4191/kcers.2013.50.6.364 -
J. Y. Park, M. H. Jeong, and W.-J. Kim, "Characterization of Slurry Infiltrated SiC
$_f$ /SiC Prepared by Electrophoretic Deposition," J. Nucl. Mater., 442, S390-93 (2013). https://doi.org/10.1016/j.jnucmat.2013.04.074 - T. Koyanagi, K. Ozawa, T. Hinoki, K. Shimoda, and Y. Katoh, "Effects of Neutron Irradiation on Mechanical Properties of Silicon Carbide Composites Fabricated by Nano-Infiltrated and Transient Eutectic Phase Process," J. Nucl. Mater., 448 [1-3], 478-86 (2014). https://doi.org/10.1016/j.jnucmat.2013.10.005
- Y. Katoh, T. Nozawa, L. L. Snead, K. Ozawa, and H. Tanigawa, "Stability of SiC and Its Composites at High Neutron Fluence," J. Nucl. Mater., 417 [1-3], 400-05 (2011). https://doi.org/10.1016/j.jnucmat.2010.12.088
- M. G. Jenkins and M. D. Mello, "Fabrication, Processing, and Characterization of Braided, Continuous SiC Fiber-Reinforced/CVI SiC Matrix Ceramic Composites," Mater. Manuf. Process., 11 [1], 99-118 (1996). https://doi.org/10.1080/10426919608947463
-
D. Kim, J. Lee, J. Y. Park, and W.-J. Kim, "Effect of Filament Winding Methods on Surface Roughness and Fiber Volume Fraction of SiC
$_f$ /SiC Composite Tubes(in Korean)," J. Kor. Ceram. Soc., 50 [6], 359-63 (2013). https://doi.org/10.4191/kcers.2013.50.6.359 - D. Cohen, S.C. Mantell, and L. Zhao, "The Effect of Fiber Volume Fraction on Filament Wound Composite Pressure Vessel Strength," Compos. PART B-Eng., 32, 413-29 (2001).
- E. V. Morozov, "The Effect of Filament-winding Mosaic Patterns on the Strength of Thin-walled Composite Shells," Compos. Struct., 76, 123-29 (2006). https://doi.org/10.1016/j.compstruct.2006.06.018
- S.-D. Liang, F.-Q. Zhang, L.-H. Xia, Q. Yu, and X.-Y. Zhang, "Effect of Preform Structure on Densification Process of Plate C/C Composite," Mater. Sci. Eng. Powder Metall., 17 [2], 252-7 (2012).
- X. Hou, H. Li, Y. Chen, and K. Li, "Modeling of Chemical Vapor Infiltration Process for Fabrication of Carbon-Carbon Composites by Finite Difference Methods," Carbon, 37, 669-77 (1999). https://doi.org/10.1016/S0008-6223(98)00243-7
- B. Reznik, D. Gerthsen, W. Zhang, and K.J. Huttinger, "Microstructure of SiC Deposited from Methyltrichlorosilane," J. Eur. Ceram. Soc., 23, 1499-508 (2003). https://doi.org/10.1016/S0955-2219(02)00364-3
-
D. Kim, W.-J. Kim, J.-E. Jang, S. G. Yoon, D.-J. Kim, and J. Y. Park, "Oxidation of CVD
${\beta}$ -SiC in Impurity-controlled Helium Environment at 950$^{\circ}C$ (in Korean)," J. Kor. Ceram. Soc., 48 [5], 426-32 (2011). https://doi.org/10.4191/kcers.2011.48.5.426 - J. Chin, P. K. Gantzel, and R. G. Hudson, "The Structure of Chemical Vapor Deposited Silicon Carbide," Thin Solid Films, 40, 57-72 (1977). https://doi.org/10.1016/0040-6090(77)90103-1
피인용 문헌
- Applicability of Swaging as an Alternative for the Fabrication of Accident-Tolerant Fuel Cladding vol.13, pp.12, 2014, https://doi.org/10.3390/en13123182