DOI QR코드

DOI QR Code

A Study on Performance Reliability Analysis Device of Primary Battery

1차 전지의 성능 신뢰도 분석 장치에 관한 연구

  • Kim, Yon Soo (Department of Industrial and Management Engineering, Incheon National University) ;
  • Chung, Young-Bae (Department of Industrial and Management Engineering, Incheon National University)
  • 김연수 (인천대학교 산업경영공학과) ;
  • 정영배 (인천대학교 산업경영공학과)
  • Received : 2014.06.11
  • Accepted : 2014.06.19
  • Published : 2014.06.30

Abstract

In industrial situation, electronic and electro-mechanical systems have been using different type of batteries in rapidly increasing numbers. These systems commonly require high reliability for long periods of time. Wider application of battery for low-power design as a prime power source requires us knowledge of failure mechanism and reliability of batteries in terms of load condition, environment condition and other explanatory variables. Battery life is an important factor that affects the reliability of such systems. There is need for us to understand the mechanism leading to the failure state of battery with performance characteristic and develop a method to predict the life of such battery. The purpose of this paper is to develope the methodology of monitoring the health of battery and determining the condition or fate of such systems through the performance reliability to predict the remaining useful life of primary battery with load condition, operating condition, environment change in light of battery life variation. In order to evaluate on-going performance of systems and subsystems adopting primary batteries as energy source, The primitive prototype for performance reliability analysis device was developed and related framework explained.

Keywords

References

  1. Electropaedia, Battery and Energy Technology, http:// www.mpoweruk.com.
  2. Goebel, K., Saha, B., Saxena, A., Celaya, J.R., and Christophersen, J., Prognostics in Battery Health Management. Instrumentation and Measurement Magazine, IEEE, 2008, Vol. 11, No. 4, p 33-40. https://doi.org/10.1109/MIM.2008.4579269
  3. Jeong Heon, A Performance Testing Device of Drycell. Journal of Institute of Control, Robotics and Systems, 2011, Vol. 17, No. 2, p 171-175. https://doi.org/10.5302/J.ICROS.2011.17.2.171
  4. Lewis, E.E., Introduction to Reliability Engineering, $2^{nd}$ ed., New York, John Wiley and Sons, 1992.
  5. Kim, Y.S. and Chung, Y.B., Performance Reliability Monitoring and Prediction. Journal of the Korean Institute of Plant Engineering, 1998, Vol. 3, No. 2, p 373- 386.
  6. Kim, Y.S. and Chung, Y.B., A Study on Non-Operting Reliability Analysis. Journal of the Korean Institute of Plant Engineering, 2013, Vol. 18, No. 3, p 5-13.
  7. Kim, Y.S. and Chung, Y.B., Condition Parameter-based On-line Performance Reliability. Journal of the Society of Korea Industrial and Systems Engineering, 2007, Vol. 30, No. 3, p 103-108.
  8. Knezevic, J., Condition Parameter Based Approach to Calculation of Reliability Characteristics. Reliability Engineering, Vol. 19, p 29-39.
  9. Kumar, D., Proportional Hazards Modelling of Repairable Systems. Quality and Reliability Engineering International, 1995, Vol. 11, p 361-369. https://doi.org/10.1002/qre.4680110507
  10. Meeker, W.Q. and Escobar, L.A., Accelerated Degradation Tests : Modeling and Analysis. Technometrics, 1998, Vol. 40, No. 2, p 89-99. https://doi.org/10.1080/00401706.1998.10485191
  11. Pau, L.F., Failure Diagnosis and Performance Monitoring, New York, Marcel Dekker, 1981.
  12. Park, D.H, Baik J.W., Park, J.W., Song, B.S., Reliability Engineering, KNOU Press, 2010.
  13. Saha, B., Goebel, K., Poll, S., and Christophersen, J., Prognostics Methods for Battery Health Monitoring Using a Bayesian Framework. IEEE Transactions on Instrumentation and Measurement, 2009, Vol. 58, No. 2, p 291-296. https://doi.org/10.1109/TIM.2008.2005965
  14. Yang, G.B., Life Cycle Reliability Engineering, Wiley and Sons, 2007.
  15. Yinjiao Xing, Qiang Miao, Tsui, K.-L., and Pecht, M., Prognostics and Health Monitoring for Lithium-ion Battery, Intelligence and Security Informatics(ISI), IEEE International Conference, 2011, p 242-247.