Polymer(Korea) (폴리머)

The Polymer Society of Korea (한국고분자학회)
권호 표지
DOI QR코드

DOI QR Code

Effect of Changing of Filling Materials in NR-SBR Type Elastomer Based Rubber Materials on Mechanical Properties

필러재료의 변화에 따른 NR-SBR 타입 엘라스토머 기반 고무재료의 기계적물성

  • Received : 2014.03.07
  • Accepted : 2014.03.29
  • Published : 2014.09.25
Download PDF
⟨ Previous Next ⟩

Abstract

The effects of different filling materials and stabilizers in polymer based materials that are used as shoe soles in the shoemaking industry on the mechanical properties (strength, failure, tensile, tearing, bending etc.) of the final products have been examined in this study. Natural rubber (NR RSS3) and styrene-butadiene rubber (SBR 1502) were used as the main matrix material. New compounds were formed by replacing the fillings in the general compound of the existing factory ($SiO_2$, $CaCO_3$) with 40% (1200 g) blast furnace flue dust, rice husk, reclaimed rubber (recycled) and wood ash. Comparison of the new compounds with the existing compounds revealed a decrease in hardness, density, dimension stability, bending, tearing, % elongation and failure strength and an increase in wearing.

Keywords

References

  1. D. Derouet, C. Nakason, P. Intharapat, Q. N. Tran, F. Gohier, and C. Nakason, Eur. Polym. J., 45, 820 (2009). https://doi.org/10.1016/j.eurpolymj.2008.11.044
  2. N. Akcakale, Philosopher of Doctorate Thesis, Sakarya University (2008).
  3. M. Denac, V. Musil, and I. Smit, Compos. Part A, 36, 1282 (2005). https://doi.org/10.1016/j.compositesa.2005.01.011
  4. A. Khalil, N. S. Sirajuddin, and R. Z. Nudrat, J. Adv. Res., 5, 165 (2014). https://doi.org/10.1016/j.jare.2013.01.008
  5. C. Kumnuantip and N. Sombatsompop, Mater. Lett., 57, 3167 (2003). https://doi.org/10.1016/S0167-577X(03)00019-3
  6. S. S r wardena, H. Ismail, and U.S. Ish aku, The Effect of Filler Loading And Curing Agent Concentrastion On Rheoligal Properties of Polypropylene/Ethylene-Propylene-D ene-Terpolymer/ With Rice Husk Ash Thermoplastic Elastomer Ternary Composites, University Sains, Malaysia, 2001.
  7. Y. M. ahin, Masters of Science Thesis, Bogazici University (2001).
  8. O. T. Savasci, N. Uyanik, and G. Akovali, Plastics and Plastic Technology, Cantay Publishing, stanbul, 1998.
  9. M. N. Ichazo, M. Hermandez, C. Albano, and J. Gonzales, Proc. of the 8th Polym. of Adv. Tech. Int. Sym., Budapest, Hungary, p. 13 (2005).
  10. M. Sumaila, B. I. Ugheoke, L. Timon, and T. Oloyede, Leonardo J. Sci., 5, 159 (2006).
  11. N. Akcakale, A. Demirer, E. Nart, and I. Ozsert, Academic Journals, 58, 758 (2010).
  12. T. P. Mohan, J. Kuriakose, and K. Kanny, J. Ind. Eng. Chem., 17, 264 (2011). https://doi.org/10.1016/j.jiec.2011.02.019
  13. F. S. Jolene, R. C. R. Nunes, and V. J. R. R. Pita, Rheological Behavior of Mineral Fillers in Shoe Soles Composites, Universidad Federal do Rio, RJ, Brazil, 2000.
  14. S. Pasertsri, F. Lagarde, N. Rattanasom, C. Sirisinha, and P. Daniel, Polym. Test., 32, 852 (2013). https://doi.org/10.1016/j.polymertesting.2013.04.007
  15. D. E. El-Nashar, E. A. M. Youssef, and M. A. Abd El-Ghaffar, Mater. Design, 31, 1350 (2010). https://doi.org/10.1016/j.matdes.2009.09.005
  16. T. P. Mohan, J. Kuriakose, and K. Kanny, J. Ind. Eng. Chem., 18, 979 (2012). https://doi.org/10.1016/j.jiec.2011.10.010
  17. X. Ge, M. C. Le, and U. R. Cho, Polymer(Korea), 38, 16 (2014).
  18. K. Joseph, S. Thomas, and C. Pavithran, Polymer, 37, 5139 (1996). https://doi.org/10.1016/0032-3861(96)00144-9
  19. L. E. Nielsen, Editor, Mechanical Properties of Polymers and Composites, Marcel Dekker, Inc., New York, Vol 2 (1974).
  20. J. Sharifa, W. M. Z. W. Yunus, K. Z. H. M. Dahlan, and M. H. Ahmad, Polym. Test., 242, 211 (2005).
  21. U. Basuli, G. B. Lee, S. Y. Jang, J. Oh, J. H. Lee, S. C. Kim, N. D. Jeon, Y. I. Huh, and C. Nah, Elast. Compos., 47, 297 (2012). https://doi.org/10.7473/EC.2012.47.4.297
  22. J. W. Lee, H. S. Joo, S. C. Kang, and Y. W. Chang, Elastomer, 41, 245 (2006).
  23. K. J. Kim and J. V. Kool, Elastomer, 39, 263 (2004).
  24. C. B. Bucknall, S. G. Aggarwal, G. Allen, and J. C. Bevington, Editors, in Comprehensive Polymer Science, Pergamon, Oxford, England, Vol 7, p 27 (1989).
  25. Y. Lu, L. Liu, M. Tian, H. Geng, and L. Zhang, Eur. Polym. J., 41, 589 (2005). https://doi.org/10.1016/j.eurpolymj.2004.10.012
  26. N. Akcakale, A. Demirer, and . Ozsert, 6th International Advanced Technologies Symposium, Elazig, Turkey, p. 314 (1998).

Cited by

  1. The Effect of Mica Powder and Wollastonite Fillings on the Mechanical Properties of NR/SBR Type Elastomer Compounds vol.20, pp.3, 2017, https://doi.org/10.1007/bf03449149