DOI QR코드

DOI QR Code

Conceptual Design of An Underwater Vehicle Powered by Water-breathing Ramjet

해수흡입 램젯추진 수중운동체 개념설계

  • Um, Jaeryeong (Department of Aerospace Engineering, Pusan National University) ;
  • Lim, Hyunae (Department of Aerospace Engineering, Pusan National University) ;
  • Jin, Wansung (Department of Aerospace Engineering, Pusan National University) ;
  • Choi, Jeong-Yeol (Department of Aerospace Engineering, Pusan National University)
  • Received : 2013.12.10
  • Accepted : 2014.07.05
  • Published : 2014.08.01

Abstract

Many countries are paying efforts to the research and development of water-breathing ramjet propulsion for submersible vehicle with the super-cavitation which makes traveling at high speed in underwater possible. In this study, a conceptual design of an underwater vehicle with water-breathing ramjet was carried out. Mission profiles and operating conditions are determined by examining the operation environment. Drag is estimated based on the theories of super-cavitation and fluid mechanics. The sizing and performance analysis of the components were performed using thrust required, thrust and specific impulse of designed engine were verified.

초공동현상을 이용한 고속 수중 운동체와 함께 이를 가능하게 하는 기술로써 해수흡입 램젯 추진에 대한 연구가 여러 나라에서 진행되고 있다. 본 연구에서는 해수 흡입 램젯 엔진을 추진기관으로 하는 수중 운동체의 개념 설계를 진행하였다. 가동 환경을 확인하여 임무 작동 조건을 설정하였으며, 해당 조건 내에서 초공동현상 이론과 유체역학적 지식을 통해 운동체에 작용하는 항력을 예측하였다. 이로부터 필요 추력을 산출하여 추진기관의 대략적인 사이징과 부분별 성능해석을 수행하였으며, 설계한 추진기관의 추력 및 비추력 성능을 확인하였다.

Keywords

References

  1. Nah, Y.I. and Lee, S.Y., "Core Technology and Recent Trends in the Development of Supercavitating Rocket Torpedo," Joint Conference of the Korea Association of Ocean Science and Technology Societies, pp. 436-443, 2011.
  2. Nah, Y.I. and Kim, Y.G., "Propulsion Technologies of Supercavitating Rocket Torpedo, Shkval," Conference of the Korean Society of Propulsion Engineers, pp. 383-387, Nov. 2011.
  3. Chen, J.H., "Regression Relation between Cavitation Number and Cavity Length for Two-dimensional Supercavitating Hydrofoils," Proceedings of the National Science Council Republic of China - Part A: Physics Science and Engineering, Vol. 24, No. 2, pp. 120-129, 2000.
  4. Hargrove, J., "Supercavitation and Aerospace Technology in the Development of High-speed Underwater Vehicles," 42nd Aerospace Sciences Meeting and Exhibit, Reno, N.V., U.S.A., AIAA 2004-130, Jan. 2004.
  5. Mottard, E.J. and Charles, J.S., "Preliminary Investigation of an Underwater Ramjet Powered by Compressed Air," NASA TN-D-991, 1961.
  6. Chae, J.O., Sim, J.H., Wang, H., Han, S.W. and Cha, K.S., "The Study Combustion Processes of the Solid Hydro Reactive Propellant in the Water Breathing Ram Jet Engine," Proceedings of Asian Joint Conference on Propulsion and Power 2006, Beijing, China, AJCPP2006-22122, Apr. 2006.
  7. Yang, T.J. and He, M.G., "A Theoretical Investigation of Thermodynamic Performance for a Ramjet Based on a Magnesium-water Reaction," Proceedings of the Institution of Mechanical Engineers Part M: Journal of Engineering for the Maritime Environment, Vol. 223, pp. 61-72, 2010.
  8. Yang, Y.J. and He, M.G., "Numerical Study on Operating Characteristics of a Magnesium-based Fuel Ramjet," Acta Astronautica, Vol. 79, pp. 96-106, 2012. https://doi.org/10.1016/j.actaastro.2012.04.027
  9. Lee, Y.H., "A Study on Propulsion Performance of Underwater Ram-Jet with Optimized Nozzle Configuration," Journal of the Society of Naval Architects of Korea, Vol. 34, No. 4, pp. 42-52, 1997.
  10. Hoerner, S.F., Fluid-dynamic Drag: Practical Information on Aerodynamic Drag and Hydrodynamic Resistance, Hoerner Fluid Dynamics, Bricktown, N.J., U.S.A., 1965.
  11. Sharqawy, M.H., John, H.L. and Syed M.Z., "Thermophysical Properties of Seawater: A Review of Existing Correlations and Data," Desalination and Water Treatment, Vol. 16, Issue 1-3, pp. 354-380, 2010. https://doi.org/10.5004/dwt.2010.1079
  12. Franc, J.P. and Michel, J.M., Fundamentals of Cavitation, Vol. 76, Springer, 2006.
  13. Kamada, R., "Trajectory Optimization Strategies for Supercavitating Vehicles," Doctoral dissertation, Georgia Institute of Technology, 2005.
  14. Ahn, B.K., Kim, H.T. and Lee, C.S., "Experimental and Numerical Studies on Super-cavitating Flow of Axisymmetric Cavitators," ASME 2010 29th International Conference on Ocean, Offshore and Arctic Engineering, American Society of Mechanical Engineers, pp. 885-890, 2010.
  15. Brooks, J.D. and Thomas, G.L., "Hydrodynamic Drag of Torpedoes," Naval Ordnance Test Station, NAVORD Report 5842, 1958.
  16. Granville, P.S., "Elements of the Drag of Underwater Bodies," David W Taylor Naval Ship Research and Development Center Bethesda MD Ship Performance Dept., No. SPD-672-01, 1976.
  17. Roy, G.D., Advances in Chemical Propulsion: Science to Technology, CRC Press, 2010.
  18. Korean Society of Propulsion Engineers, An Introduction of Aerospace Propulsion System, Hantee Media, 2008.
  19. Engineer's Toolbox, "Fusion Heat of Metal," World Wide Web location http://www.engineeringtoolbox.com/fusion-heat-metals-d_1266.html.
  20. Anderson, J.D., "Modern Compressible Flow: with Historical Perspective," Vol. 12, McGraw-Hill, N.Y., U.S.A., 1990.
  21. Sutton, G.P. and Oscar B., Rocket Propulsion Elements, Wiley, 2011.
  22. Hill, P.G. and Peterson, C.R., Mechanics and Thermodynamics of Propulsion, Addison-Wesley Publishing Co., Reading, MA, 1992.