Journal of ILASS-Korea (한국분무공학회지)

Institute for Liquid Atomization and Spray Systems-Korea (한국분무공학회)
권호 표지
DOI QR코드

DOI QR Code

Experimental Study to reveal Optimum Condition of CO2 Supply Membrane at Photobioreactor

광생물반응기의 CO2 공급 멤브레인의 최적 조건 도출을 위한 실험적 연구

  • 김하늘 (한국교통대학교 에너지시스템공학과) ;
  • 이재환 (한국교통대학교 에너지시스템공학과) ;
  • 최은지 (한국에너지기술연구원) ;
  • 오유관 (한국에너지기술연구원) ;
  • 김정배 (한국교통대학교 에너지시스템공학과)
  • Received : 2014.07.31
  • Accepted : 2014.09.18
  • Published : 2014.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

This study was performed to reveal the relationships between various gas supply conditions including inlet numbers and positions for Photobioreactor. To do that, this study was installed the experimental apparatus. All experiments were performed for the cases with 1, 2, 3, and 4 inlets and for gas flow rate of 4~8 lpm. Through the experiments, this study showed that the case with 3 or 4 inlets could reduce about 50% of the pressure loss head for all gas path than that of one inlet base case. So, these results can be used as basic data to design the gross or multiple photobioreactor.

Keywords

References

  1. S. M. Jeon, I. H. Kim, J. M. Ha and J. H. Lee, "Overview of Technology for Fixation of Carbon Dioxide Using Microalgae", Journal of the Korean Industrial and Engineering Chemistry, Vol. 19, No. 2, 2008, pp. 145-150.
  2. B. R. Choi and T. Y. Lee, "Cultivation of Chlorella sp. under Different Aeration Conditions Illuminated by Light Emitting Diode", Korean Society for Biotechnology and Bioengineering, Vol. 27, No. 4, 2012, pp. 263-267. https://doi.org/10.7841/ksbbj.2012.27.4.263
  3. Y. S. Kim, H. I. Park, D. K. Kim and D. Pak, "The Growth Characteristics of Spirulina platensis in Cylindrical Photobioreactor", Korean J. Biotechnology Bioengineering, Vol. 18, No. 4, 2002, pp. 277-281.
  4. I. S. Suh and C. G. Lee, "Photobioreactor Engineering: Design and Performance", Biotechnology and Bioprocess Engineering, Vol. 8, No. 6, 2003, pp. 313-321. https://doi.org/10.1007/BF02949274
  5. J. I. Yoo, I. B. Lee, H. S. Hwang, S. W. Hong, I. H. Seo, J. P. Bitog, K. S. Kwon and Y. H. Kim, "Utilization of CFD Simulation Model for a Bubble Column Photobioreactor", Journal of The Korean Society of Agricultural Engineers, Vol. 51, No. 5, 2009, pp. 1-8. https://doi.org/10.5389/KSAE.2009.51.5.001
  6. 안동규, 조창규, 안영수, 정상화, 김종태, "광경화 방식의 3차원 프린팅 기술을 이용한 교효율 광생물 반응기 시작품 제작", 한국정밀공학회 2014년 춘계학술대회논문집, 2014, pp. 1176.
  7. 안동규, 이호진, "3차원 열성형 해석을 통한 특징형상을 가진 중대형급 평판형 광생물 반응기 성형성 및 성형조건 예측", 2014년 대한기계학회 생산설계부문 춘계학술대회논문집, 2014, pp. 13-14.
  8. D. G. Ahn, H. J. Lee and Y. S. Ahn, "Joining Technology of Flat Panel Photobioreactor Case", Journal of the Korean Society for Precision Engineering, Vol. 30, No. 2, 2013, pp. 154-163. https://doi.org/10.7736/KSPE.2013.30.2.154