DOI QR코드

DOI QR Code

여과분리형 생물반응조의 고액분리 특성

Solid-Liquid Separation Characteristics with Bio-filter Media Reactor

  • 박영배 (부산가톨릭대학교 환경공학과) ;
  • 정용준 (부산가톨릭대학교 환경공학과)
  • Park, Young Bae (Department of Environmental Engineering, Catholic University of Pusan) ;
  • Jung, Yong Jun (Department of Environmental Engineering, Catholic University of Pusan)
  • 투고 : 2014.05.13
  • 심사 : 2014.06.13
  • 발행 : 2014.08.31

초록

여과분리형 생물반응조 운전에서 발생하는 flux 감소 원인을 분석하였고, 상등수 수질과 침강성 변화가 flux에 미치는 영향을 평가하였다. 또한 여과막 모듈과 역세정 장치 일체형 시스템의 특성을 평가하였다. 반응조는 17L 유효 용적의 아크릴 반응조에 $100{\mu}m$ 공경의 여과막 모듈을 통해 배출되는 여과시스템으로, 여과시간이 경과함에 따라 상등수의 수질 특히 탁도와 TOC의 수질이 악화됨에 따라 flux가 점진적으로 감소하였다. MLSS 농도가 18000mg/L 이상에서는 여과저항이 급격히 증가하였다. 상등수의 수질과 flux와의 관계를 규명하기 위해서는 MLSS 농도가 10000mg/L 이상에서는 곤란함에 따라 5000mg/L이 적절한 것으로 판단된다. 활성슬러지 플록을 파괴시켜 SVI를 250으로 조정하여 여과를 시작한 경우, 상등수의 탁도가 증가하여, 침강성이 악화됨에 따라 flux도 점차 감소하였다. 여과막 모듈과 폭기세정 장치를 일체화한 시스템에서 공기 공급은 30~60초 정도로 설정함이 적정한 것으로 나타났다.

This work was performed to find the effect of operation parameters on the permeate flux through the activated sludge dynamic layer, and to indicate the relationship between the water quality of supernatant and flux based on the results. Since the effluent can be obtained through steady and stable formation of cake layer in the bio-filter media system, it is an important subject to keep and control microbes with activated state in the bio-reactor. Filtration resistance was drastically increased at more than 18000mg/L of MLSS. With filtration time continued, the flux was gradually decreased and the water qualities of supernatant monitored by turbidity and TOC were also deteriorated. This phenomenon indicated that the organic materials generated by microbes and accumulated in the reactor might affect the flux in the system. In addition, the decrease of flux was simultaneously observed in the sludge volume index. When SVI was controlled from 150 to 250, the flux was also decreased. The proper aeration time was recommended to 30 to 60 seconds in this system. In order to operate this system steadily, therefore, the control of water quality of supernatant and SVI should be proceeded.

키워드

참고문헌

  1. Alavi, MMR, Satoh, H and Mino, T (2001). Performance of coarse pore filtration activated sludge system, Asian waterqual 2001 First IWA Asia-Pacific regional conference, Japan, pp. 189-194.
  2. Dijk, LV and Roncken, GCG (1997). Membrane bioreactors for wastewater treatment: The state of the art and new developments, Wat. Sci & Tech., 35, pp. 35-41.
  3. Fu, HY, Xu, PC, Huang, GH, Chai, T, Hou, M and Gao, PF (2012). Effects of aeration parameters on effluent quality and membrane fouling in a submerged membrane bioreactor using Box-behnken response surface methodology, Desalination, 302, pp. 33-42. https://doi.org/10.1016/j.desal.2012.06.018
  4. Im, SH, Bae, MS and Cho, KM (2003). Treatment of sewage with a nonwoven fabric filter bioreactor, J. of KSWQ, 19(1), pp. 99-107. [Korean literature]
  5. Jung, YJ, Kiso, Y and Min, KS (2004). Solid-liquid separation of activated sludge with submerged mesh filter, J. of KSEE, 26, pp. 299-304. [Korean literature]
  6. Jung, YJ and Min, KS (2001). Wastewater treatment using intermittently aerated mesh submerged filtration bio-reactor and operational stability, J. of KSEE, 23, pp. 13-20. [Korean literature]
  7. Jung, YJ, Min, KS and Nam, KH (2000). Wastewater treatment by submerged filtration bio-reactor using a mesh as filter media, J. of KSWQ, 16, pp. 121-131. [Korean literature]
  8. Kaya, Y, Ersan, G, Vergili, I, Gonder, ZB, Yilmaz, G, Dizge, N and Aydiner, C (2013). The treatment of pharmaceutical wastewater using in a submerged membrane bioreactor under different sludge retention times, J. of Memb. Sci., 442, pp. 72-82. https://doi.org/10.1016/j.memsci.2013.03.059
  9. Kiso, Y, Jung, YJ, Ichinari, T, Park, M, Kitao, T, Nishimura, K and Min, KS (2000). Wastewater treatment performance of a filtration bio-reactor equipped with a mesh as a filter media, Water Res., 34, pp. 4143-4150. https://doi.org/10.1016/S0043-1354(00)00201-3
  10. Kiso, Y, Jung, YJ, Park, MS, Wang, W, Shimase, M, Yamada, T and Min, KS (2005). Coupling of sequencing batch reactor and mesh filtration: Operational parameters and wastewater, Water Res., 39, pp. 4887-4898. https://doi.org/10.1016/j.watres.2005.05.025
  11. Lee, JW, Jutidamrongphan, W, Park, KY, Moon, SH and Park, C (2012). Advanced treatment of wastewater from food waste disposer in modified ludzack-ettinger type membrane bioreactor, Envi. Eng. Res., 17, pp. 59-63. https://doi.org/10.4491/eer.2012.17.2.059
  12. Mutamim, NSA, Noor, ZZ, Hassan, MAA, Yuniarto, A and Olsson, G (2013). Membrane bioreactor: Applications and limitations in treating high strength industrial wastewater, Chem. Eng. Jour., 225, pp. 109-119. https://doi.org/10.1016/j.cej.2013.02.131
  13. Wang, W, Jung, YJ, Kiso, Y, Yamada, T and Min, KS (2006). Excess sludge reduction performance of an aerobic SBR process equipped with a submerged mesh filter unit, Pro. Biochem., 41, pp. 745-751. https://doi.org/10.1016/j.procbio.2005.09.016
  14. Xu, M, Wen, X, Huang, X, Yu, Z and Zhu, M (2013). Mechanisms of membrane fouling controlled by online ultrasound in an anaerobic membrane bioreactor for digestion of waste activated sludge, J. of Memb. Sci., 445, pp. 119-126. https://doi.org/10.1016/j.memsci.2013.06.006