Journal of the Korea Concrete Institute (콘크리트학회논문집)

Korea Concrete Institute (한국콘크리트학회)
권호 표지
DOI QR코드

DOI QR Code

Experiment of Shear Behavior of Reinforced Concrete Beams with High Volume Fly Ash

하이 볼륨 플라이애쉬 철근콘크리트 보의 전단거동 실험

  • Yoo, Sung-Won (Dept. of Civil and Environmental Engineering, Woosuk University) ;
  • Lee, Hyung-Jib (Dept. of Civil and Environmental Engineering, Woosuk University)
  • 유성원 (우석대학교 토목환경공학과) ;
  • 이형집 (우석대학교 토목환경공학과)
  • Received : 2014.04.10
  • Accepted : 2014.04.17
  • Published : 2014.08.30
Download PDF
⟨ Previous Next ⟩

Abstract

It is known that the best way to recycle fly ash is to use in concrete. It is impossible to bury in the ground this fly ash recently, so it is trying to use high volume fly ash concrete. Nevertheless, recent main research topics are focused in the part of material only, however, it is necessary to perform the research about structural shear behavior. Therefore, in this paper, 27 test members were manufactured with 3 test variables, namely fly ash replacement ratio 0, 35%, 50%, concrete compressive strength 20, 40, 60 MPa and 3 shear stirrups amounts. 27 test members were tested for shear behavior. From the test results, there were no differences between 35%, 50% high volume fly ash cement concrete and ordinary concrete without fly ash (FA=0%).

화력발전소에서 발생되는 플라이애쉬는 콘크리트의 첨가재로 사용되는 것이 석탄회 재활용 방안 중 최선으로 알려져 있다. 이러한 석탄회는 최근 더 이상 매립이 불가능하여 콘크리트에 다량 첨가가 시도되고 있다. 그럼에도 불구하고 현재까지 하이볼륨 플라이애쉬(high volume fly ash: HVFA) 시멘트 콘크리트의 연구분야는 주로 재료적인 분야에 대해서만 수행되어지고 있는 실정이다. 그러나 하이볼륨 플라이애쉬 시멘트 콘크리트의 구조재료로의 적용을 위해서는 구조 부재 전단거동 등에 대한 연구가 필수적이다. 이를 위하여 이 논문에서는 플라이애쉬 치환율 0, 35% 및 50%, 압축강도 20, 40 및 60 MPa 그리고 전단철근량 3수준을 실험변수로 하여 플라이애쉬 시멘트 철근콘크리트 보 27개를 제작하여 이들의 전단거동을 실험적으로 평가하였다. 실험 결과에 의하면 플라이애쉬를 첨가하지 않은 일반 콘크리트(FA=0%)와 35%, 50% 플라이애쉬 시멘트 콘크리트 부재의 전단거동은 크게 차이나지 않음을 알 수 있었다.

Keywords

References

  1. Jung, S. W., Standardization Technology for The Environmental-Friendly Utilization of Pond Ash Technical Report, R-2007-2-151, Korea Conformity Laboratories, Seoul, 2010, pp. 1-15 (in Korean).
  2. Singh, M. and Garg, M., "Phosphogypsum - Fly Ash Cementitious Binder - Its Hydration and Strength Development," Cement and Concrete Research, Vol. 25, No. 4, 1995, pp. 752-758. (doi: http://dx.doi.org/10.1016/0008- 8846(95)00065-K)
  3. Bilodeau, A., Sivasundaram, V., Painter, K., and Malhotra, V., "Durability of Concrete Incorporating High Volumes of Fly Ash from Sources in the USA," American Concrete Institute Material Journal, Vol. 91, No. 1, 1994, pp. 13-20. (doi: http://dx.doi.org/10.14359/4411)
  4. Muller, U. and Rubner, K., "The Microstructure of Concrete Made with Municipal Waste Incinerator Bottom Ash as an Aggregate Component," Cement and Concrete Research, Vol. 36, No. 10, 2006, pp. 1434-1443. (doi : http://dx.doi.org/10.1016/j.cemconres.2006.03.023)
  5. Jung, S. H. and Kwon, S. J., "Engineering Properties of Cement Mortar with Pond Ash in South Korea as Construction Materials: from Waste to Concrete," Central European Journal of Engineering, VERSITA, Vol. 3, No. 3, pp. 522-533.
  6. Arezoumandi, M., Wolfe, M. H., and Volz, J. S., "A Comparative Study of the Bond Strength of Reinforcing Steel in High-Volume Fly Ash Concrete and Conventional Concrete," Construction Building Matrials, Vol. 40, 2013, pp. 919-924. (doi: http://dx.doi.org/10.1016/j.conbuildmat. 2012.11.105)
  7. Arezoumandi, M. and Volz, J. S., "Effect of Fly Ash Replacement Level on the Shear Strength of High- Volume Fly Ash Concrete Beams," Journal of Cleaner Produciton, Vol. 59, No. 2, 2009, pp. 120-130.
  8. Yang, I. H., Joh, C. B., Kang, S. T., and Kim, B. S., "An Experimental Study on Flexural Behavior of Steel Fiber Reinforced Ultra High Performance Concrete," Journal of Korean Concrete Institute Structural, Vol. 21, No. 6, 2009, pp. 737-744. (doi: http://dx.doi.org/10.4334/JKCI.2009.21.6.737)
  9. Federal Highway Administration, Material Property Characterization of Ultra-High Performance Concrete 1st ed., Washington DC, FHA, 2006, pp. 23-49.
  10. Shin, S. W., Ghosh, S. K., and Moreno, J., "Flexural Ductility of Ultra High Strength Concrete Members," American Concrete Institute Structural Journal, Vol. 86, No. 4, 1989, pp. 394-400. (doi: http://dx.doi.org/10.14359/2877)
  11. Yoon, S., Monteiro, P. J. M., Macphee, D. E., and Glasser, F. P., "Statistical Evaluation of the Mechanical Properties of High-Volume Class F Fly Ash Concretes," Construction Building Matrials, Vol. 54, 2014, pp. 432-442. (doi: http://dx.doi.org/10.1016/j.conbuildmat.2013.12.077)