DOI QR코드

DOI QR Code

Measuring abutment convergence angles using stereovision dental image processing system

  • Yang, Hong-Seok (Seoul National University School of Dentistry) ;
  • Park, Ji-Man (Department of Dental Prosthodontics, Ewha Womans University) ;
  • Han, Jung-Suk (Department of Prosthodontics and Dental Research Institute, Seoul National University School of Dentistry) ;
  • Lee, Jai-Bong (Department of Prosthodontics and Dental Research Institute, Seoul National University School of Dentistry) ;
  • Kim, Sung-Hun (Department of Prosthodontics and Dental Research Institute, Seoul National University School of Dentistry) ;
  • Yeo, In-Sung (Department of Prosthodontics and Dental Research Institute, Seoul National University School of Dentistry)
  • Received : 2013.10.22
  • Accepted : 2014.02.26
  • Published : 2014.08.29

Abstract

PURPOSE. The purpose of this study was to develop a dental image processing system using a three-dimensional (3D) camera and stereovision technology. The reliability of the system for measuring axial wall convergence angles was evaluated. MATERIALS AND METHODS. The new system predicted 3D coordinate points from 2D images and calculated distances and angles between points. Two examiners measured axial wall convergence angles for seven artificial abutments using a traditional tracing-based method (TBM) and the stereovision-based method (SVBM). Five wax abutment models of simplified abutment forms were made and axial wall convergence angles of wax models were measured by both methods. The data were statistically analyzed at the level of significance, 0.05. RESULTS. Intraclass correlation coefficients showed excellent intra-examiner and inter-examiner reliabilities for both methods. Bland-Altman plots and paired t-tests showed significant differences between measurements and true values using TBM; differences were not significant with SVBM. CONCLUSION. This study found that the SVBM reflected true angle values more accurately than a TMB and illustrated an example of 3D computer science applied to clinical dentistry.

Keywords

References

  1. Bradski GR, Kaehler A. Learning OpenCV: computer vision with the OpenCV library. Farnham; O'Reilly; 2008. p. 555.
  2. The glossary of prosthodontic terms. J Prosthet Dent 2005; 94:10-92. https://doi.org/10.1016/j.prosdent.2005.03.013
  3. Al-Omari WM, Al-Wahadni AM. Convergence angle, occlusal reduction, and finish line depth of full-crown preparations made by dental students. Quintessence Int 2004;35:287-93.
  4. el-Ebrashi MK, Craig RG, Peyton FA. Experimental stress analysis of dental restorations. IV. The concept of parallelism of axial walls. J Prosthet Dent 1969;22:346-53. https://doi.org/10.1016/0022-3913(69)90196-6
  5. Goodacre CJ, Campagni WV, Aquilino SA. Tooth preparations for complete crowns: an art form based on scientific principles. J Prosthet Dent 2001;85:363-76. https://doi.org/10.1067/mpr.2001.114685
  6. Jorgensen KD. The relationship between retention and convergence angle in cemented veneer crowns. Acta Odontol Scand 1955;13:35-40. https://doi.org/10.3109/00016355509028171
  7. Kaufman EG, Coelho DH, Colin L. Factors influencing the retention of cemented gold castings. J Prosthet Dent 1961; 11:487-502. https://doi.org/10.1016/0022-3913(61)90232-3
  8. Weed RM. Determining adequate crown convergence. Tex Dent J 1980;98:14-6.
  9. Wilson AH Jr, Chan DC. The relationship between preparation convergence and retention of extracoronal retainers. J Prosthodont 1994;3:74-8. https://doi.org/10.1111/j.1532-849X.1994.tb00132.x
  10. Lewis RM, Owen MM. A mathematical solution of a problem in full crown construction. J Am Dent Assoc 1959;59: 943-7. https://doi.org/10.14219/jada.archive.1959.0249
  11. Weed RM, Baez RJ. A method for determining adequate resistance form of complete cast crown preparations. J Prosthet Dent 1984;52:330-4. https://doi.org/10.1016/0022-3913(84)90437-2
  12. Chandra Shekar S, Giridhar K, Suhas Rao K. An in vitro study to evaluate the retention of complete crowns prepared with five different tapers and luted with two different cements. J Indian Prosthodont Soc 2010;10:89-95. https://doi.org/10.1007/s13191-010-0017-x
  13. el-Ebrashi MK, Craig RG, Peyton FA. Experimental stress analysis of dental restorations. VI. The concept of proximal reduction in compound restorations. J Prosthet Dent 1969; 22:663-70. https://doi.org/10.1016/S0022-3913(69)80010-7
  14. Shillingburg HT Jr, Sather DA, Wilson EL Jr, Cain JR, Mitchell DL, Blanco LJ, Kessler JC. Principles of tooth preparations. In: Shillingburg HT Jr, Sather DA, editors. Fundamentals of fixed prosthodontics. 4th ed. Chicago; Quintessence Publishing Co. Ltd.; 2012. p. 131-48.
  15. Annerstedt A, Engstrom U, Hansson A, Jansson T, Karlsson S, Liljhagen H, Lindquist E, Rydhammar E, Tyreman- Bandhede M, Svensson P, Wandel U. Axial wall convergence of full veneer crown preparations. Documented for dental students and general practitioners. Acta Odontol Scand 1996;54:109-12. https://doi.org/10.3109/00016359609006014
  16. Mack PJ. A theoretical and clinical investigation into the taper achieved on crown and inlay preparations. J Oral Rehabil 1980;7:255-65. https://doi.org/10.1111/j.1365-2842.1980.tb00443.x
  17. Ayad MF, Maghrabi AA, Rosenstiel SF. Assessment of convergence angles of tooth preparations for complete crowns among dental students. J Dent 2005;33:633-8. https://doi.org/10.1016/j.jdent.2004.12.008
  18. Dodge WW, Weed RM, Baez RJ, Buchanan RN. The effect of convergence angle on retention and resistance form. Quintessence Int 1985;16:191-4.
  19. Leempoel PJ, Lemmens PL, Snoek PA, van't Hof MA. The convergence angle of tooth preparations for complete crowns. J Prosthet Dent 1987;58:414-6. https://doi.org/10.1016/0022-3913(87)90265-4
  20. Ohm E, Silness J. The convergence angle in teeth prepared for artificial crowns. J Oral Rehabil 1978;5:371-5. https://doi.org/10.1111/j.1365-2842.1978.tb01256.x
  21. Smith CT, Gary JJ, Conkin JE, Franks HL. Effective taper criterion for the full veneer crown preparation in preclinical prosthodontics. J Prosthodont 1999;8:196-200. https://doi.org/10.1111/j.1532-849X.1999.tb00035.x
  22. Velasquez-Plata D, Andres CJ. The art of crown preparation: a review of principles. J Indiana Dent Assoc 1996;75:6-11; quiz 12.
  23. Kent WA, Shillingburg HT Jr, Duncanson MG Jr. Taper of clinical preparations for cast restorations. Quintessence Int 1988;19:339-45.
  24. Noonan JE Jr, Goldfogel MH. Convergence of the axial walls of full veneer crown preparations in a dental school environment. J Prosthet Dent 1991;66:706-8. https://doi.org/10.1016/0022-3913(91)90457-8
  25. Nordlander J, Weir D, Stoffer W, Ochi S. The taper of clinical preparations for fixed prosthodontics. J Prosthet Dent 1988; 60:148-51. https://doi.org/10.1016/0022-3913(88)90304-6
  26. de Vet HC, Terwee CB, Knol DL, Bouter LM. When to use agreement versus reliability measures. J Clin Epidemiol 2006; 59:1033-9. https://doi.org/10.1016/j.jclinepi.2005.10.015
  27. Shrout PE, Fleiss JL. Intraclass correlations: uses in assessing rater reliability. Psychol Bull 1979;86:420-8. https://doi.org/10.1037/0033-2909.86.2.420
  28. Weir JP. Quantifying test-retest reliability using the intraclass correlation coefficient and the SEM. J Strength Cond Res 2005;19:231-40.
  29. Doros G, Lew R. Design based on intra-class correlation coefficients. Am J Biostat 2010;1:1-8. https://doi.org/10.3844/amjbsp.2010.1.8
  30. Landis JR, Koch GG. The measurement of observer agreement for categorical data. Biometrics 1977;33:159-74. https://doi.org/10.2307/2529310