참고문헌
- Shin, K. H., 2011, "Modeling of Cooling Channels of Injection Mould Using Functionally Graded Material," Trans. Korean Soc. Mech. Eng. A, Vol. 35, No. 12, pp. 1647-1653. https://doi.org/10.3795/KSME-A.2011.35.12.1647
- Jeong, J. S. and Shin, K. H., 2013, "Fabrication of Functionally Graded Materials Between P21 Tool Steel and Cu by Using Laser-Aided Layered Manufacturing," Trans. Korean Soc. Mech. Eng. A, Vol. 37, No. 1, pp. 61-66. https://doi.org/10.3795/KSME-A.2013.37.1.061
- Shin, K. H., Natu, H., Dutta, D. and Mazumder, J. , 2003, "A Method for the Design and Fabrication of Heterogeneous Objects," Materials & Design, Vol. 24, No. 5, pp. 339-353. https://doi.org/10.1016/S0261-3069(03)00060-8
- www.insstek.co.kr
- Beal, V. E., Erasenthiran, P., Hopkinson, N., Dickens, P. and Ahrens, C. H., 2006, "The Effect of Scanning Strategy on Laser Fusion of Functionally Graded H13/Cu Materials," International Journal of Advanced Manufacturing Technology, Vol. 30, pp. 844-852. https://doi.org/10.1007/s00170-005-0130-x
- Beal, V. E., Erasenthiran, P., Hopkinson, N., Dickens, P. and Ahrens, C. H., 2006, "Optimisation of Processing Parameters in Laser Fused H13/Cu Materials Using Response Surface Method(RSM)," Journal of Materials Processing Technology, Vol. 174, pp. 145-154. https://doi.org/10.1016/j.jmatprotec.2005.04.101
- Ahn, D. G., Kim H. W. and Lee K. Y., 2009, "Design of the Thermally Conductive Mould to Improve Cooling Characteristics of Injection Mould for a Mouse," Trans. Korean Soc. Mech. Eng. A, Vol. 33, No. 3, pp. 201-209. https://doi.org/10.3795/KSME-A.2009.33.3.201
- Ahn, D. G. and Kim, H. W., 2010, "Study on the Manufacture of a Thermal Management Mould with Three Different Materials Using a Direct Metal Tooling Rapid Tooling Process," Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 224, No. B3, pp. 385-402. https://doi.org/10.1243/09544054JEM1523
- Tang, C. and Chassapis, C. and Manoochehri, 1997, "Optimal Cooling System Design for Multi-Cavity Injection Moulding," Finite Element in Analysis and Design, Vol. 26, No. 3, pp. 229-251. https://doi.org/10.1016/S0168-874X(96)00083-2
- Li. C. L., 2001, "A Feature-Based Approach to Injection Mould Cooling System Design," Computer-Aided Design, Vol. 33, pp. 1073-1090. https://doi.org/10.1016/S0010-4485(00)00144-5
- Kieback, B., Neubrand, A. and Riedel, H., 2003, "Processing Techniques for Functionally Graded Materials," Materials Science and Engineering A, Vol. 362, pp. 81-105. https://doi.org/10.1016/S0921-5093(03)00578-1
- Nemat-Alla, M. M., Ata, M. H., Bayoumi, M. R. and Khair-Eldeen, W., 2011, "Powder Metallurgical Fabrication and Microstructural Investigations of Aluminum/Steel Functionally Graded Material," Materials Sciences and Applications, Vol. 2, No. 12, pp. 1708-1718. https://doi.org/10.4236/msa.2011.212228
- Ghosh, A., Miyamoto, Y., Reimanis, I. and Lannutti, J., 1997, "Functionally Graded Materials: Manufacture, Properties, and Applications," Ceramic Transactions, Vol. 76.
- Cho, J. R. and Park, H. J., 2002, "High Strength FGM Cutting Tools: Finite Element Analysis on Thermoelastic Characteristics," Journal of Materials Processing Technology, Vol. 130-131, pp. 351-356. https://doi.org/10.1016/S0924-0136(02)00823-3
- Cho, J. R., 2006, "Optimum Material Composition Design for Thermal Stress Reduction in FGM Lathe Bit," Composites Part A: Applied Science and Manufacturing, Vol. 37, No. 10, pp. 1568-1577. https://doi.org/10.1016/j.compositesa.2005.11.001
- Duran, A. and Nalbant, M., 2005, "Finite Element Analysis of Bending Occurring While Cutting with High Speed Steel Lathe Cutting Tools," Materials and Design, Vol. 26, pp. 549-554. https://doi.org/10.1016/j.matdes.2004.07.028
- Degarmo, E. P., Black, J. T. and Kohser, R. A., 2003, Materials and Processes in Manufacturing 9th Edition, John Wiley & Sons, New York.