References
- Oliver, W. C. and Pharr, G. M., 1992, "An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments," J. Mater. Res., Vol. 7, pp. 1564-1583. https://doi.org/10.1557/JMR.1992.1564
- Pharr, G. M., Oliver, W. C. and Brotzen, F. R., 1992, "On the Generality of the Relationship among Contact Stiffness, Contact Area and Elastic Modulus during Indentation," J. Mater. Res., Vol. 7, pp. 613-617. https://doi.org/10.1557/JMR.1992.0613
- Oliver, W. C. and Pharr, G. M., 2004, "Measurement of Hardness and Elastic Modulus by Instrumented Indentation: Advances in Understanding and Refinements to Methodology," J. Mater. Res., Vol. 19, No. 1, pp. 3-20. https://doi.org/10.1557/jmr.2004.19.1.3
- Chen, X., Ogasawara, N., Zhao, M. and Chiba, N., 2007, "On the Uniqueness of Measuring Elastoplastic Properties from Indentation: The Indistinguishable Mystical Materials. J. Mech. Phys. Solids, Vol. 55, pp. 1618-1660. https://doi.org/10.1016/j.jmps.2007.01.010
- Lawn, B. R., Evans, A. G., and Marshall, D. B., 1980, "Elastic/Plastic Indentation Damage in Ceramics: The Median/Radial Crack System," J. Am. Ceram. Soc., Vol. 63, pp. 574-581. https://doi.org/10.1111/j.1151-2916.1980.tb10768.x
- Lee, J. H., Gao, Y. F., Johanns, K. E. and Pharr, G. M., 2012, "Cohesive Interface Simulations of Indentation Cracking as a Fracture Toughness Measurement Method for Brittle Materials," Acta Mater., Vol. 60, pp. 5448-5467. https://doi.org/10.1016/j.actamat.2012.07.011
- Bower, A. F., Fleck, N. A., Needleman, A. and Ogbonna, N., 1993, "Indentation of a Power Law Creeping Solid," Proc. R. Soc. Lond. (A), Vol. 441, No. 1911, pp. 97-124. https://doi.org/10.1098/rspa.1993.0050
- Lee, J. H. and Lee, H., 2012, "Transient Creep Analysis in Indentation Tests," Trans. Korean Soc. Mech. Eng. A, Vol. 36, No. 1, pp. 81-90. https://doi.org/10.3795/KSME-A.2012.36.1.081
- Lee, J. H., Lee, H., Hyun, H. C., Kim, M., 2010, "Numerical Approaches and Experimental Verification of the Conical Indentation Techniques for Residual Stress Evaluation," J. Mater. Res., Vol. 25, No. 11, pp. 2212-2223. https://doi.org/10.1557/jmr.2010.0275
- Lee, J. H., Lee, H. and Kim, D. H., 2008, "A Numerical Approach to Elastic Modulus Evaluation Using Conical Indenter with Finite Tip Radius," J. Mater. Res., Vol. 23, No. 1, pp. 2528-2537. https://doi.org/10.1557/jmr.2008.0314
- Bei, H., George, H. P., Hay, J. L. and Pharr, G. M., 2005, "Influence of Indenter Tip Geometry on Elastic Deformation During Nanoindentation," Phy. Rev. Lett., Vol. 95, pp. 045501-1-4. https://doi.org/10.1103/PhysRevLett.95.045501
- Bei, H., Gao, Y. F., Shim, S., George, E. P. and Pharr, G. M., 2008, "Strength Difference Arising from Homogeneous Versus Heterogeneous Dislocation Nucleation," Phys. Rev. B, Vol. 77, pp. 060103-1-4. https://doi.org/10.1103/PhysRevB.77.060103
- Sneddon, I. N., 1951, Fourier Transforms, McGraw-Hill, pp. 450-468.
- Sneddon, I. N., 1965, "The Relaxation between Load and Penetration in the Axisymmetric Boussinesq Problem for a Punch of Arbitrary Profile," Int. J. Eng. Sci., Vol. 3, pp. 47-57. https://doi.org/10.1016/0020-7225(65)90019-4
- Hay, J. C., Bolshakov, A. and Pharr, G. M., 1999, "A Critical Examination of the Fundamental Relations Used in the Analysis of Nanoindentation Data," J. Mater. Res., Vol. 14, pp. 2296-2305. https://doi.org/10.1557/JMR.1999.0306
- ABAQUS User's Manual, Version 6.12, 2012, Dassault Systemes SImulia Corp., Providence, RI, USA.
- Hyun, H. C., Kim, M., Lee, J. H. and Lee, H., 2011, "A Dual Conical Indentation Technique Based on FEA Solutions for Property Evaluation," Mech. Mater., Vol. 43, No. 6, pp. 313-331. https://doi.org/10.1016/j.mechmat.2011.03.003