DOI QR코드

DOI QR Code

Research on residual stress in SiCf reinforced titanium matrix composites

  • Qu, Haitao (Beijing Aeronautical Manufacturing Technology Research Institute) ;
  • Hou, Hongliang (Beijing Aeronautical Manufacturing Technology Research Institute) ;
  • Zhao, Bing (Beijing Aeronautical Manufacturing Technology Research Institute) ;
  • Lin, Song (Shijiazhuang Tiedao University)
  • 투고 : 2014.02.21
  • 심사 : 2014.06.24
  • 발행 : 2014.08.25

초록

This study aimed to theoretical calculate the thermal residual stress in continuous SiC fiber reinforced titanium matrix composites. The analytical solution of residual stress field distribution was obtained by using coaxial cylinder model, and the numerical solution was obtained by using finite element model (FEM). Both of the above models were compared and the thermal residual stress was analyzed in the axial, hoop, radial direction. The results indicated that both the two models were feasible to theoretical calculate the thermal residual stress in continuous SiC fiber reinforced titanium matrix composites, because the deviations between the theoretical calculation results and the test results were less than 8%. In the titanium matrix composites, along with the increment of the SiC fiber volume fraction, the longitudinal property was improved, while the equivalent residual stress was not significantly changed, keeping the intensity around 600 MPa. There was a pronounced reduction of the radial residual stress in the titanium matrix composites when there was carbon coating on the surface of the SiC fiber, because carbon coating could effectively reduce the coefficient of thermal expansion mismatch between the fiber and the titanium matrix, meanwhile, the consumption of carbon coating could protect SiC fibers effectively, so as to ensure the high-performance of the composites. The support of design and optimization of composites was provided though theoretical calculation and analysis of residual stress.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Arsenault, R.J. and Taya, M. (1987), "Thermal residual stress in metal matrix composite", Acta Metall., 35(3), 651-659. https://doi.org/10.1016/0001-6160(87)90188-X
  2. Feillard, P. (1996), "The high temperature behavior of long fibre reinforced titanium under transverse loading", Acta Metallurgica, 44(2), 643-656.
  3. Fukushima, A., Fujiwara, C., Kagawa, Y. and Masuda, C. (2000), "Effect of interfacial properties on tensile strength in SiC/Ti-15-3 composites", Mater. Sci. Eng. A, 276(1-2), 243-249. https://doi.org/10.1016/S0921-5093(99)00151-3
  4. Gundel, D.B. and Wawner, F.E. (1996), "Experimental and theoretical assessment of the longitudinal tensile strength of unidirectional SiC-fiber/titanium-matrix composites", Compos. Sci. Tech., 57(4), 471-481.
  5. Gundel, D.B., Warrier, S.G. and Miracle, D.B. (1999), "The transverse tensile behavior of SiC fiber/Ti-6Al-4V composites: 2. Stress distribution and interface failure", Compos. Sci. Tech., 59(7), 1087- 1096. https://doi.org/10.1016/S0266-3538(98)00153-5
  6. Huang, B., Yang, Y.Q., Luo, H.J. and Yuan, M.N. (2009), "Effects of the coating system and interfacial region thickness on the thermal residual stresses in $SiC_{f}/Ti-6Al-4V$ composites", Mater. Des., 30(3), 718-722. https://doi.org/10.1016/j.matdes.2008.05.013
  7. Li, J.K., Yang, Y.Q., Luo, X., Yuan, M.N., Li, L.L. and Zhang, L.W. (2008), "Thermal residual stress in continuous SiC fiber reinforced titanium matrix composites", Rare Metal Mater. Eng., 37(4), 621-624.
  8. Lou, J.H., Yang, Y.Q., Luo, X., Yuan, M.N. and Feng, G.H. (2010), "The analysis on transverse tensile behavior of SiC/Ti-6Al-4V", Mater. Des., 31(8), 3949-3953. https://doi.org/10.1016/j.matdes.2010.03.034
  9. Ma, Z.J., Yang, Y.Q., Zhu, Y. and Chen. Y. (2004), "Effect of fiber distribution on residual thermal stress in titanium matrix composite", Trans. Nonferrous Met. Soc. China, 14(2), 330-334.
  10. Majumdar, B.S. (1999), "Development and characterization of new coatings for improved balance of mechanical properties of titanium matrix composites", Mater. Sci. Eng. A, 259(2), 171-188. https://doi.org/10.1016/S0921-5093(98)00903-4
  11. Mao, W.G., Chen, Q., Dai, C.Y., Yang, L., Zhou, Y.C. and Lu, C. (2010), "Effects of piezo-spectroscopic coefficients of 8 wt.% $Y_{2}O_{3}$ stabilized $ZrO_{2}$ on residual stress measurement of thermal barrier coatings by Raman spectroscopy", Surf. Coat. Tech., 204, 3573-3577. https://doi.org/10.1016/j.surfcoat.2010.04.024
  12. Mikata, Y. and Taya, M. (1985), "Stress field in a coated continuous fiber composite subjected to thermo-mechanical loadings", J. Compos. Mater., 19(6), 554-578. https://doi.org/10.1177/002199838501900607
  13. Oddershede, J., Schmidt, S., Poulsen, H.F., Sorensen, H.O., Wright, J. and Reimers, W. (2010), "Determining grain resolved in polycrystalline materials using three-dimensional X-ray diffraction", J. Appl. Crystallogr., 43, 539-549. https://doi.org/10.1107/S0021889810012963
  14. Qu, H.T., Ren, X.P., Hou, H.L., Zhao, B. and Li, S.X. (2011), "Interfacial behaviors in SiC fiber reinforced titanium matrix composites during thermal exposure", Adv. Mater. Res., 295-297, 880-885. https://doi.org/10.4028/www.scientific.net/AMR.295-297.880
  15. Subramanian, P.R., Krishnamurthy, S., Keller, S.T. and Mendiratta, M.G. (1998), "Processing of continuously reinforced Ti-alloy metal matrix composites(MMC) by magnetron sputtering", Mater. Sci. Eng. A, 244(1), 1-10. https://doi.org/10.1016/S0921-5093(97)00820-4
  16. Thomas, M.P. and Winstone, M.R. (1999), "Longitudinal yielding behaviour of SiC-fibre-reinforced titanium-matrix composites", Compos. Sci. Tech., 59(2), 297-303. https://doi.org/10.1016/S0266-3538(98)00072-4
  17. Vassel, A. (1999), "Continuous fibre reinforced titanium and aluminium composites: A comparison", Mater. Eng. A, 263(2), 305-313. https://doi.org/10.1016/S0921-5093(98)01161-7
  18. Warrier, S.G., Rangaswamy, P., Bourke, M.A.M. and Krishnamurthy, S. (1999), "Assessment of the fiber/matrix interface bond strength in SiC/Ti-6Al-4V composites", Mater. Sci. Eng. A, 259(2), 220-227. https://doi.org/10.1016/S0921-5093(98)00894-6
  19. Warwick, C.M. and Clyne, T.W. (1991), "Development of composite coaxial cylinder stress analysis model and its application to SiC monofilament systems", J. Mater. Sci., 26(14), 38177-3827.
  20. Woo, W., Em, V., Mikula, P., An, G.B. and Seong, B.S. (2011), "Neutron diffraction measurements of residual stresses in a 50 mm thick weld", Mater. Sci. Eng. A, 528(12), 4120-4124. https://doi.org/10.1016/j.msea.2011.02.009
  21. Wood, M. and Close, M.W. (1995), "Fibre-reinforced intermetallic compounds by physical vapour deposition", Mater. Sci. Eng. A, 192/193(2), 590-596. https://doi.org/10.1016/0921-5093(94)03282-3