한국전산유체공학회지 (Journal of computational fluids engineering)

한국전산유체공학회 (Korean Society of Computational Fluids Engineering)
권호 표지
DOI QR코드

DOI QR Code

받음각 변화에 대한 수중익형의 캐비테이션 해석

CAVITATION FLOW ANALYSIS OF HYDROFOIL WITH CHANGE OF ANGLE OF ATTACK

  • 강태진 (부산대학교 기계공학부) ;
  • 박원규 (부산대학교 기계공학부) ;
  • 정철민 (국방과학연구소 6기술연구본부 2부)
  • Kang, T.J. (School of Mechanical Engineering, Pusan Nat'l Univ.) ;
  • Park, W.G. (School of Mechanical Engineering, Pusan Nat'l Univ.) ;
  • Jung, C.M. (Naval Systems R&D Institute Division 2, Agency for Defense Development)
  • 투고 : 2014.02.04
  • 심사 : 2014.06.05
  • 발행 : 2014.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Cavitation causes a great deal of noise, damage to components, vibrations, and a loss of efficiency in devices, such as propellers, pump impellers, nozzles, injectors, torpedoes, etc. Thus, the cavitating flow simulation is of practical importance for many engineering systems. In the present work, a two-phase flow solver based on the homogeneous mixture model has been developed. The solver employs an implicit preconditioning, dual time stepping algorithm in curvilinear coordinates. The flow characteristics around Clark-Y hydrofoil were calculated and then validated by comparing with the experimental data. The lift and drag coefficients with changes of angle of attack and cavitation number were obtained. The results show that cavity length and lift, drag coefficient increase with increasing angle of attack.

키워드

참고문헌

  1. 2004, Merkle, C.L. and Li. D., "Liquid Flow around Non-cavitating and Cavitating NACA0015 Hydrofoil : Benchmark Problems for GEMS Code," Mathematical and Numerical Aspects of Low Mach Number Flows : Numerical Workshop, France.
  2. 2010, Naoya, O., Yuka, I., Motohiko, N. and Toshiaki I., "Numerical Prediction of Cavitation Erosion Intensity in Cavitation Flows around a Clark Y 11.7% Hydrofoil," Journal of Fluid Science and Technology, Vol.5, pp.416-431. https://doi.org/10.1299/jfst.5.416
  3. 1998, Merkle, C.L., Feng, J.Z. and Buelow P.E.O., "Computational modeling of the dynamics of sheet cavitation," Proceedings of the 3rd International Symposium on Cavitation, Grenoble, France.
  4. 2001, Venkateswarn, S., Lindau, J.W., Kunz, R.F. and Merkle, C.L., "Preconditioning algorithms for computation of multi-phase mixture flows," AIAA Paper, 2001-0279.
  5. 2002, Lindau, J.W., Kunz, R.F., Boger, D.A., Steinbring, D.R. and Gibeling, H.J., "High Reynolds number, unsteady, multiphase CFD modeling of cavitation flow," Journal of Fluids Engineering, Vol.124, pp.607-615. https://doi.org/10.1115/1.1487360
  6. 2001, Gotfred, S.B., Morten, K. and Roger, E.A., "Numerical Modeling of Sheet and Tip vortex Cavitation with Fluent5," Cav2001.
  7. 2001, Wang, G., Senocak, I., Shyy, W., Ikohagi, T., Cao, S., "Dynamics of attached turbulent cavitation flows," Progress in Aerospace Sciences, Vol.37, pp.551-581. https://doi.org/10.1016/S0376-0421(01)00014-8
  8. 2006, Angelo, C., Cristina. B., Emilio R. and Luca, d., "Thermal Cavitation Experiments on a NACA0015 Hydrofoil ," Journal of Fluids Engineering, Vol.128, pp.326-331. https://doi.org/10.1115/1.2169808
  9. 2006, Amromin, E., Kopriva, J., Arndt, R.E. and Wosnik, M., "Hydrofoil Drag Reduction by Partial Cavitation," Journal of Fluids Engineering, Vol.128, pp.931-936. https://doi.org/10.1115/1.2234787
  10. 2012, Ha, C.T. and Park, W.G,. "Application of preconditioning to compressible multiphase mixture flow computation," ISFMFE2012, Jeju, Korea.
  11. 1982, Chien, K.Y., "Prediction of change and boundary layer flows with a low-Reynolds turbulence model," AIAA Journal., Vol.22, pp.33-38.
  12. 1981, Roe P.L., "Approximate Riemann Solvers, Parameter Vectors, and Difference Schemes," Journal of Computational Physics, Vol.43, pp.357-372. https://doi.org/10.1016/0021-9991(81)90128-5
  13. 1979, van Leer, B., "Towards the ultimate conservative difference scheme . A second order sequel to Godunov's method," AIAA Journal, Vol.32, pp.101-136.
  14. 2006, Merkle, C.L., Li, D. and Venkateswaran, S., "Multi - Disciplinary computational analysis in propulsion," Joint Propulsion Conference & Exhibit, AIAA Paper 2006-4575.
  15. 2009, Ha, C.T., Park, W.G. and Merkle, C.L., "Multiphase flow analysis of cylinder using a new cavitation model," CAV2009, MI, USA.
  16. 2010, Ha, C.T. and Park, W.G., "Application of Strongly Implicit Procedure Solver to Solve Partial- and Super- Cavitating Flows," ICCES MM'10, Busan, Korea.
  17. 1966, Murai, H., Hirata, Y. and Mikashima, Y,. "Research on Swept-back Blades Laid Between Parallel wall Report 1," Institute of high speed mech Tohoku Univ., Vol.17, pp.185-231.
  18. 1999, Liu, S., Higuchi, J. and Ikohagi, T., "Experimental study of cavity flow behavior on a 2-D hydrofoil," JSME Int J Ser B, 42(4), pp.641-648. https://doi.org/10.1299/jsmeb.42.641

피인용 문헌

  1. Numerical Analysis of Tip Vortex and Cavitation of Elliptic Hydrofoil with NACA 662-415 Cross Section vol.32, pp.4, 2018, https://doi.org/10.26748/KSOE.2018.6.32.4.244