DOI QR코드

DOI QR Code

탄소강 2행 1열 일면전단 볼트접합부의 최대내력과 면외변형 영향에 관한 실험적 연구

An Experimental Study on Ultimate Strength and Curling Behavior of Thin-walled Carbon Steel Single Shear Two-Bolted Connections

  • 김태수 (한밭대학교 건축공학부) ;
  • 강현식 (경남과학기술대학교 건축공학과)
  • 투고 : 2013.12.05
  • 심사 : 2014.02.28
  • 발행 : 2014.03.25

초록

The purpose of this experimental study is to investigate the ultimate strength and curling influence on structural behaviors of single shear bolted connection of thin-walled carbon steel fabricated with two bolts. The end distance parallel to the loading direction and plate thickness are considered as main variables. Curling also occurred in these carbon steel connections with a long end distance and thinner plate. It is known that all specimens failed by block shear fracture and the curling occurrence led to the ultimate strength reduction of thin-walled carbon steel bolted connections. The ultimate strength and fracture mechanism of test results were compared with those of current design standards such as AIK(KBC2009), AISC, AIJ, AISI NAS and EC3. The design standards provided a poor prediction for the ultimate strength and fracture mechanism. Therefore, modified equations considering curling influence are proposed in this paper.

키워드

참고문헌

  1. 대한건축학회(AIK), 냉간성형강 구조설계기준 및 해설, 1999
  2. American Iron and Steel Institute, North American Specification for the Design of Cold-Formed Steel Structural Members, AISI S100-07, 2007
  3. Eurocode 3, European Committee for Standardization, Design of steel structures, Part 1.3-general rules, supplementary rules for cold formed thin gauge members and sheeting, 1996
  4. 임영수, 표성현, 최순주, 최문식, 하중방향으로 배열된 냉간성 형강 볼트접합부의 지압내력에 관한 실험적 연구, 한국강구조학회 학술발표대회논문집, 2000
  5. 최문식, 최순주, 강호순, 냉간성형강 고력볼트 접합부의 극한 내력에 관한 실험적 연구(볼트구멍 형상을 중심으로), 대한건축학회 논문집(구조계), 18권 4호, 2002
  6. 최순주, 최문식, 냉간성형강의 고력볼트 접합부에서 볼트구멍 크기와 와셔의 효과에 의한 극한내력에 관한 연구, 한국강구조학회논문집, 11권 6호, 1999
  7. 강호순, 윤호택, 최순주, 최문식, 냉간성형강 고력볼트 접합부의 볼트구멍 치수에 따른 지압강도에 관한 실험적 연구, 대한건축학회 춘계학술발표대회논문집(구조계), 20권 1호, 2000
  8. K. F. Chung, K. H. Ip. Finite element modeling of bolted connections between cold-formed steelstrips and hot rolled steel plates under static shear. Engineering Structures, vol. 22, Oct., 1271-1284. 2001
  9. G. Winter. Tests on bolted connections in light gage, Journal Structural Division, ASCE, 82(2), 920-1-920-25, 1956
  10. C.A. Rogers and G.J. Hancock, Bolted connection tests of thin G550 and G330 sheet steels, Journal of Structural Engineering, ASCE, Vol.124, No. 7, 798-808, 1998 https://doi.org/10.1061/(ASCE)0733-9445(1998)124:7(798)
  11. C.A. Rogers and G.J. Hancock: Failure Modes of Bolted- Sheet-Steel Connections Loaded in Shear, Journal of Structural Engineering, ASCE, Vol.126, No. 3, 288-295, 2001
  12. H. Kuwamura and, A. Isozaki, Ultimate Behavior of Fastener Connections of Thin Stainless Steel Plates, Journal of Structural and Construction Engineering (Transactions of Architectural Institute of Japan), No.556, 159-166, 2002
  13. T.S. Kim, H. Kuwamura, Finite element modeling of bolted connections in thin-walled stainless steel plates under static shear, Thin-Walled Structures, Vol.45, 407-421, 2007 https://doi.org/10.1016/j.tws.2007.03.006
  14. 김태수, 정하영, 김승훈, 이용택, 하중방향 연단거리를 변수로 갖는 박판 볼트접합부의 최대내력과 면외변형에 관한 실험적 연구 -2행 2열 볼트배열의 일면전단접합-, 대한건축학회 논문집(구조계), 25권 4호, 27-34, 2009
  15. TS. Kim, HY Jeong, TJ. Cho, The finite element analysis of the ultimate behavior of thin walled carbon steel bolted connections, Journal of Constructural Steel Research, Vol.67, 1086-1095, 2011 https://doi.org/10.1016/j.jcsr.2011.01.004
  16. 대한건축학회(AIK), 건축구조기준(KBC2009), 2009
  17. American Institute of Steel Construction(AISC), Manual of Steel Construction-Load and Resistance Factor Design, 3rd edition, 2001
  18. American Institute of Steel Construction(AISC), Steel Construction Manual, 14th edition, 2011
  19. Architectural Institute of Japan, Recommendation for Limit State Design of Steel Structures, AIJ, Tokyo, Japan, 2002
  20. TS. Kim, JS, Lim, Ultimate strength of single shear two-bolted connections with austenitic stainless steel, International Journal of Steel Structures, Vol.13, 117-128, 2013 https://doi.org/10.1007/s13296-013-1011-z