DOI QR코드

DOI QR Code

Daylight Performance Evaluation of Atrium by Transformation in Freeform Type

아트리움의 비정형적 변형에 따른 채광성능 평가에 관한 연구

  • Received : 2013.10.31
  • Accepted : 2014.01.16
  • Published : 2014.01.25

Abstract

The aim of this research was to examine the correlation between the performance of daylight and geometry of FREEFORM atrium. In consideration of the solar environments that have the greatest effect on the atrium, categorized and classified types of transformations were introduced. Atrium classification defined by vertical axis, plan scale and rotation is used to determine the transformation and the type. Several atrium cases, characterized by a different form or shape, were analysed by simplified methodology to predict DF(daylight factor), direct sunlight area and Uniformity Ratio on the atrium floor, through computer simulation by Ecotect and Radiance. Simulation programmes were used to simulate square, four-sided, top-lit atria under overcast and clear sky conditions. This study has investigated the effect on daylight performance of the geometric characteristics of atrium such as PAR, distance, translation vector, types of curve, height and angle. From the results, the design guidelines are proposed as follows. All types show a decrease of light influx and increase of UR as the atrium height increases. The height of atruim, therefore, should be considered first regardless of form class or the variables of atrium. Performance shows a big difference according to the light direction if certain transformation is made along a direction. It is maximized when the transformation aligns to the direction of light and converges to the rectangular shape with low PAR. There is a decrease in performance under the environment of lights from all directions like Overcast sky.

Keywords

Acknowledgement

Supported by : 한국연구재단

References

  1. 강훈, 디지털 형태변형 기법을 이용한 비정형 건축형태생성에 관한 연구, 대한건축학회 vol22 no9, 2006
  2. 김정태, 아트리움의 이해, 한국설비기술협회, 1998
  3. 김진명, 4면형 아트리움 건물의 자연채광 계획에 관한 연구, 중앙대학교 석사학위논문, 2004
  4. 박정대, 곡면형상의 구축을 위한 디지털 기술과 건축 디자인프로세스, 서울대학교 박사학위논문, 2005
  5. 송규동, 다목적 아트리움의 자연채광성능 평가 기술, 한국조명전기설비학회지, vol.10 no.5, 1996
  6. 양혜인, RADIANCE 프로그램에 의한 빛 환경 설계 및 평가의 타당성 검증, 한양대학교 석사학위논문, 2000
  7. 이영균, 건축 계획적 조건에 따른 아트리움 냉난방 부하의 특성변화에 관한 연구, 한양대학교 석사학위논문, 2009
  8. 이종석, 건축계획, 한솔아카데미, 2008
  9. 이중건, 다양한 형태와 천창 시스템을 갖는 4면형 아트리움의 자연채광 성능, 한양대학교 석사학위논문, 2011
  10. 진정탁 외 2인, 비정형 건물의 외피형상 최적화, 한국건축친환경설비학회, 2012
  11. Bednar, M.J., An Analysis of Daylighting Design Factors in Atria, Proc, Solar85, Amer SES, Aleigh, NC, 1985
  12. Helmut Pottmann 외3인, Architectural Geometry, Bentley Institute Press, 2007
  13. Hopkinson, R.G., P. Petherbridge and J. Longmore, Daylighting, Heinemann, London, 1966
  14. John Ashley, Modification of Atrium Design to Improve Thermal and Daylighting Performance, Queensland University of Technology, 2001
  15. Julitta 외 2인, Analysis of Atrium's Architectural Aspects in Office Buildings under Tropical Sky Conditions, Institute of Science, Universiti Teknologi MARA, 2010
  16. Karel Vollers, The CAD-tool 2.0 morphological scheme of non-orthogonal high-rises, CTBUH Jounal, 2009
  17. Mabb, John Ashley, Modification of atrium design to improve thermal and daylighting performance. Masters by Research thesis, Queensland University of Technology. 2001
  18. Navvab 외1인, Daylighting Data for Atrium Design, Proc. American Solar Energy Society, Boulder, 1984
  19. Richard Saxon, Atrium Buildings: Development and Design, Van Nostrand Reinhold, 1983
  20. Samant. S and Yang. F, Daylighting in atria, Lighting Research and Technology, v39, 2007
  21. W.Y.Jung, Architectural aspects of atrium, Hong Kong Polytechnic University, 2003