한국응용과학기술학회지 (Journal of the Korean Applied Science and Technology)

  • 제31권2호
  • /
  • Pages.197-202
  • /
  • 2014
  • /
  • 1225-9098(pISSN)
  • /
  • 2288-1069(eISSN)
한국응용과학기술학회 (The Korean Society of Applied Science and Technology)
권호 표지
DOI QR코드

DOI QR Code

납축전지의 심방전용 극판에 관한 연구

A Study on the Plate for Deep Discharge in Lead Acid Battery

  • 정순욱 (금오공과대학교 정보나노소재공학과) ;
  • 구본근 (금오공과대학교 정보나노소재공학과)
  • Jeong, Soon-Wook (Dept. of Information & Nano Materials Engineering, Kumoh National Institute of Technology) ;
  • Ku, Bon-Keun (Dept. of Information & Nano Materials Engineering, Kumoh National Institute of Technology)
  • 투고 : 2014.04.17
  • 심사 : 2014.06.30
  • 발행 : 2014.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Positive plate was composed of lead hydroxide via reaction between lead oxide and $H_2O$ and lead sulfate was formed of the reaction of lead hydroxide with sulfuric acid. And its density is $3.8g/cm^3$, $4.0g/cm^3$, $4.2g/cm^3$ and $4.4g/cm^3$ by controlling volume of refined water. Curing of positive plate is done for low ($45^{\circ}C$, 40hr, over 95% of relative humidity) & high ($80^{\circ}C$, 40hr, over 95% of relative humidity) temperature, which created 3BS & 4BS active materials. Experimental result of DOD with 100% life cycle test shows that it was not related to the density of active materials but to the low & high temperature aging of active materials. The test makes us to understand that the crystallization which is made by curing of active materials is a more of a main factor than density of active materials under the deep cycle using circumstances. The active materials which were from the high temperature curing are better for deep cycle performance.

키워드

참고문헌

  1. M. J. Weighall, Techniques for Jar Formation of Valve-Regulated Lead-Acid Batteries, J. Power Sources, 116, p.p 219-231 (2003). https://doi.org/10.1016/S0378-7753(02)00706-1
  2. M. Matrakova and D. Pavlov, Thermal Analysis of Lead-Acid Battery Pastes and Active Materials, J. Power Sources, 158, p.p 1004-1011 (2006). https://doi.org/10.1016/j.jpowsour.2005.11.007
  3. Y. Liu and X. Bu, Solvothermal synthesis of $\alpha$-PbO from lead dioxide and its electrochemical performance as a positive electrode material, J. Power Sources, 242, p.p 299-304 (2013). https://doi.org/10.1016/j.jpowsour.2013.05.077
  4. N. Yu and L. Gao, Electrodeposited $PbO_{2}$ thin film on Ti electrode for application in hybrid supercapacitor, Electrochemistry communications, 11, p.p 1388-2481, (2009).
  5. Y. Guo, S. Tang and G. Meng, Failure modes of valve-regulated lead-acid batteries for electric bicycle applications in deep discharge, J. Power Sources, 191, p.p 127-133 (2009). https://doi.org/10.1016/j.jpowsour.2008.08.059
  6. Pan Xiaokun, Wen Haishan and Xie Lihong, Research on the pulse container formation of lead acid battery, Battery bimonthly, 35, p.p 230-231, (2005).
  7. M. Saravanan, M. Ganesan and S. Ambalavanan, An in situ generated carbon as integrated conductive additive for hierarchical negative plate of lead-acid battery, J. Power Sources, 251, p.p 20-29 (2014). https://doi.org/10.1016/j.jpowsour.2013.10.143
  8. S. Horie, K. Shimoda and K. Sugie, Lead acid battery for idling stop system, Power Conversion Conference-Nagoya, PCC'07 2007 Apr., p.p 1352-1356, (2007).
  9. N. Fan, C. Sun and D. Kong, Chemical synthesis of $PbO_{2}$ particles with multiple morphologies and phases and their electrochemical performance as the positive active material, J. Power Sources, 254, p.p 323-328 (2014). https://doi.org/10.1016/j.jpowsour.2013.12.077
  10. D. Yang, J. Liu and Q. Wang, A novel ultrafine leady oxide prepared from spent lead pastes for application as cathode of lead acid battery, J. Power Sources, 257, p.p 27-36 (2014). https://doi.org/10.1016/j.jpowsour.2014.01.091
  11. W.H. Zhu, Y. Zhu and B.J. Tatarchuk, A simplified equivalent circuit model for simulation of Pb-acid batteries at load for energy storage application, Energy conversion and management, 52, p.p 2794-2799, (2011). https://doi.org/10.1016/j.enconman.2011.02.013
  12. Embrandiri Manoj, Isa Dino and Arehli Roselina, An electric vehicle conversion using batteries and ultracapacitors, Journal of Asian electric vehicles, 9 p.p 1521-1527, (2011). https://doi.org/10.4130/jaev.9.1521
  13. P. Vishnu, R. Ajaykrishna and S. Thirumalini, Cost effective energy solution with dual battery for plug-in hybrid electric vehicle (PHEV) in a public transportation system, Industrial Electronics and Applications (ICIEA), 2012 7th IEEE Conference on 2012 July, p.p 1555-1560, (2012).
  14. Jeong Soon-Wook, Ku Bon-Keun, Effects of 4BS Crystal Size on the Positive Plate Behavior in Lead Acid Battery, J. of Korean Oil Chemists' Soc., 26, p.p 335-340 (2009).
  15. R. Wagner, Failure modes of valveregulated lead/acid batteries in different applications, 4th European lead battery conference, p.p 153-162 (1995).
  16. S. Laruelle, Grugeon-Dewaele, L. Torcheux, A. Delahaye-Vidal, The Curing Reaction Study of the Active Material in the Lead Acid Battery, J. Power Sources, 77, p.p 83-89 (1999). https://doi.org/10.1016/S0378-7753(98)00187-6
  17. Jenn-shing Chen, L. F. Wang, Effect of Curing on Positive-Plate Behaviour in Electric Scotter Lead/Acid Cells, J. Power Sources, 70, p.p 269-275 (1998). https://doi.org/10.1016/S0378-7753(97)02657-8
  18. Jeong Soon-Wook, Ku Bon-Keun, Effects of 4BS Crystal Size on the Positive Plate Behavior in Lead Acid Battery, J. of Korean Oil Chemists' Soc., 26, p.p 335-340 (2009).
  19. D. Pavlov, Lead/Acid Battery Positive Plates Manufactured from 4PbO.PbSO4 Pastes Prepared from Leady Oxide and Red Lead, J. Power Sources, 31, p.p 189-201 (1990). https://doi.org/10.1016/0378-7753(90)80071-K
  20. Ku Bon-Keun, Jeong Soon-Wook, Effects of Curing Conditions on the Chemical Compositions of Positive Plate for Lead Acid Battery Plates, J. of Korean Oil Chemists' Soc., 23, p.p 347-354 (2006).

피인용 문헌

  1. 자동차용 AGM 납축전지에 관한 연구 vol.32, pp.2, 2015, https://doi.org/10.12925/jkocs.2015.32.2.181
  2. 양극판의 숙성과 화성조건이 자동차용 VRLA 배터리 성능에 미치는 영향 vol.33, pp.1, 2014, https://doi.org/10.12925/jkocs.2016.33.1.83
  3. A Study on the Mixing method and Mixing Temperature of Positive Paste to Improve the Capacity of the Lead-Acid Batteries vol.33, pp.3, 2016, https://doi.org/10.12925/jkocs.2016.33.3.568