조명전기설비학회논문지 (Journal of the Korean Institute of Illuminating and Electrical Installation Engineers)

  • 제28권2호
  • /
  • Pages.92-99
  • /
  • 2014
  • /
  • 1229-4691(pISSN)
  • /
  • 2287-5034(eISSN)
한국조명전기설비학회 (The Korean Institute of IIIuminating and Electrical Installation Engineers)
권호 표지
DOI QR코드

DOI QR Code

프로그램 로직 기반의 스마트 최대 전력 관리 시스템에 관한 연구

A Study on Programmable Logic-based Smart Peak Power Control System

  • 이우철 (한경대학교 전기전자제어공학과 IT융합기술연구소) ;
  • 권성현 (한경대학교 전기전자제어공학과 IT융합기술연구소)
  • Lee, Woo-Cheol (Hankyong National University Dept. of Electrical Electronic & Control Engineering, Institute for information technology convergence) ;
  • Kwon, Sung-Hyun (Hankyong National University Dept. of Electrical Electronic & Control Engineering, Institute for information technology convergence)
  • 투고 : 2013.11.11
  • 심사 : 2013.12.17
  • 발행 : 2014.02.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The paper is related to smart maximum power system based on program logic. Especially, this system compares the total demand power with the target power by using the signal from the digital kilo watt meter. Based on the power information by the maximum power control equipment the consumed future power is anticipated. In addition, through consumed future power the controllable target power is set, and it applies on the maximum power control equipment. User or manager would control the load efficiently through the simple programming which could control load based on the control sequence and relay. To begin with the conventional maximum power control algorithm is surveyed, and the smart maximum power control system based on program logic is used, and the new algorithm from full load to proportion shut down is proposed by using PLC program. the validity of the proposed control scheme is investigated by both simulation results.

키워드

참고문헌

  1. S. D. Kim, et al., "Recommended Practice for the Assessment of Transformer Capacity by the Forecasting of Peak Power In Industrial Customers", Conference of the Korean Institute of Illuminating and Electrical Installation Engineers, pp. 383-386, Sep., 2009.
  2. S. D. Kim, et al., "Recommended Practice for the Assessment of Transformer Capacity by the Forecasting of Peak Power in Office Building Custoners", Conference of the Korean Institute of Illuminating and Electrical Installation Engineers, pp. 293-296, May, 2008.
  3. J. H. Kim, et al., "Composition and Operation of Direct Load Control(DLC) System for use of Deamand Side", Conference of the Korean Institute of Illuminating and Electrical Installation Engineers, pp. 1260-1262, July, 2003.
  4. J. H. Kim, et al., "A Study on the Implementation of Direct Load Control Resource", Conference KIEE, pp. 606-608, July, 2003.
  5. J. U. Kim, "An New Load Control Algorithms based on Power Consumption" Trans. KIEE. Vol 59, No. 9, pp. 1658-1662, Sep, 2010.
  6. S. Kino, "Application and benefits of open DeviceNet control system in the forest products industry," in Conf. Rec. Annu. Pulp and Paper Industry Technical Conf., pp. 196-203. 1999.
  7. Young-Huei Hong, Ching-Tsai Panand Wen-Wei Lin "Fast calculation of a voltage stability index of power system" Power Systems, IEEE Transactions on, vol. 12, no. 4, pp. 1555-1560, Nov. 1997.
  8. T.J. Overbye and R.P. Klump, "Effectioncalculation of power system low-voltage solutions" power systems, IEEE Transactions on, vol. 11 no. 1, pp. 75-82, Feb. 1996. https://doi.org/10.1109/59.485988
  9. S. D. Kim, S.B. Yoo, "Recommended Practice for a Reasonable Power Density and Analysis of Power Consumption Capacity for the year in Large-scale Buildings", Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, Vol. 23, No. 6, pp. 85-88, June. 2009. https://doi.org/10.5207/JIEIE.2009.23.6.085
  10. Intel/Microsoft/Toshiba, "Advanced Configuration and Power. Interface Specification," http://www.teleport.com/-acpi/.
  11. A. Toffler, Power Shift-Knowledge,Wealth, and Violence at the Edge of the 21st Century. New York: Bantam, 1990.
  12. R.H. Simpson, "power system database management" Industry Applications, IEEE Transactions on, vol. 37, no. 1, pp 153 - 157, Jan-Fed. 2001. https://doi.org/10.1109/28.903140
  13. Songi Zhao, Hongguang Liu, ShijieCheng and Deshu Chen "A new method for Calculating power system Control, Operation and Management", APSCOM-93 2nd International Conference on, vol.1, pp. 274-278, 1993.
  14. O.W.Andersen, "PC-based filed calculationsfor electic power applications" Computer Applications in Power, IEEE, vol. 2, no. 4 , pp. 22-25, Oct. 1989. https://doi.org/10.1109/67.39145
  15. Fred Halsall, "Data Communication,Computer Networks and open system." Addison Wesley, pp.62-70, 1995.