International Journal of Concrete Structures and Materials

  • 제8권2호
  • /
  • Pages.157-164
  • /
  • 2014
  • /
  • 1976-0485(pISSN)
  • /
  • 2234-1315(eISSN)
한국콘크리트학회 (Korea Concrete Institute)
권호 표지
DOI QR코드

DOI QR Code

Durability Properties and Microstructure of Ground Granulated Blast Furnace Slag Cement Concrete

  • Divsholi, Bahador Sabet (School of Civil and Environmental Engineering, Nanyang Technological University) ;
  • Lim, Tze Yang Darren (School of Civil and Environmental Engineering, Nanyang Technological University) ;
  • Teng, Susanto (School of Civil and Environmental Engineering, Nanyang Technological University)
  • 투고 : 2013.04.29
  • 심사 : 2013.12.04
  • 발행 : 2014.06.30
⟨ 이전 논문 다음 논문 ⟩

초록

Ground granulated blast-furnace slag (GGBS) is a green construction material used to produce durable concrete. The secondary pozzolanic reactions can result in reduced pore connectivity; therefore, replacing partial amount of Portland cement (PC) with GGBS can significantly reduce the risk of sulfate attack, alkali-silica reactions and chloride penetration. However, it may also reduce the concrete resistance against carbonation. Due to the time consuming process of concrete carbonation, many researchers have used accelerated carbonation test to shorten the experimental time. However, there are always some uncertainties in the accelerated carbonation test results. Most importantly, the moisture content and moisture profile of the concrete before the carbonation test can significantly affect the test results. In this work, more than 200 samples with various water-cementitious material ratios and various replacement percentages of GGBS were cast. The compressive strength, electrical resistivity, chloride permeability and carbonation tests were conducted. The moisture loss and microstructure of concrete were studied. The partial replacement of PC with GGBS produced considerable improvement on various properties of concrete.

키워드

참고문헌

  1. ACI Committee 222. (2001). Protection of metals in concrete against corrosion. ACI 222R-01 (pp. 41). Farmington Hills, MI: American Concrete Institute.
  2. ASTM C1202-10. (2010). Electrical indication of concrete's ability to resist chloride ion penetration. West Conshohocken, PA: American Society for Testing and Materials.
  3. BS EN 12390-3. (2009). Testing hardened concrete: Compressive strength of test specimens. London, UK: British Standards Institute.
  4. Feng, N. Q., Shi, Y. X., & Ding, J. T. (2000). Properties of concrete with ground ultrafine phosphorus slag. Cement, Concrete, and Aggregates, 22(2), 128-132. https://doi.org/10.1520/CCA10472J
  5. Galle, C. (2001). Effect of drying on cement-based materials pore structure as identified by mercury intrusion porosimetry: A comparative study between oven-, vacuum-, and freeze. Cement and Concrete Research, 31(10), 1467-1477. https://doi.org/10.1016/S0008-8846(01)00594-4
  6. Gao, J. M., Qian, C. X., Liu, H. F., Wang, B., & Li, L. (2005). ITZ microstructure of concrete containing GGBS. Cement and Concrete Research, 35(7), 1299-1304. https://doi.org/10.1016/j.cemconres.2004.06.042
  7. Gjorv, O. E. (2009). Durability design of concrete structures in severe environments (p. 232). London, UK: Taylor & Francis.
  8. Guneyisi, E., & Gesoglu, M. (2008). A study on durability properties of high-performance concretes incorporating high replacement levels of slag. Materials and Structures, 41(3), 479-493. https://doi.org/10.1617/s11527-007-9260-y
  9. Habert, G., & Roussel, N. (2009). Study of two concrete mixdesign strategies to reach carbon mitigation objectives. Cement & Concrete Composite, 31(6), 397-402. https://doi.org/10.1016/j.cemconcomp.2009.04.001
  10. Hadj-Sadok, A., Kenai, S., Courard, L., & Khatib, J. M. (2010). Transport properties of mortars and concretes modified with medium hydraulic activity ground granulated blast furnace slags. In Second International Conference on Sustainable Construction Materials and Technologies, Ancona, Italy.
  11. Harrison, T. A., Jones, M. R., Newlands, M. D., Kandasami, S., & Khanna, G. (2012). Experience of using the prTS 12390-12 accelerated carbonation test to assess the relative performance of concrete. Magazine of Concrete Research, 64(8), 737-747. https://doi.org/10.1680/macr.11.00162
  12. Ji, Y., & Jong, H. C. (2003). Effects of densified silica fume on microstructure and compressive strength of blended cement pastes. Cement and Concrete Research, 33(10), 1543-1548. https://doi.org/10.1016/S0008-8846(03)00100-5
  13. Jia, Y., Aruhan, B., & Yan, P. (2011). Natural and accelerated carbonation of concrete containing fly ash and GGBS after different initial curing period. Magazine of Concrete Research, 64(2), 143-150.
  14. Lagerblad, B. (2005). Carbon dioxide uptake during concrete life cycle: State of the art. Swedish Cement and Concrete Research Institute CBI Report 2, ISBN 91-976070-0-2. Stockholm, Sweden: CBI.
  15. Lim, T.Y. D., Sabet, D. B.,&Teng, S. (2012). In situ inspection of ultra durable concrete using electrical resistivity technique. Advanced Materials Research, 368-373, 1989-1992.
  16. Nazari, A., & Riahi, S. (2011). Splitting tensile strength of concrete using ground granulated blast furnace slag and $SiO_{2}$ nanoparticles as binder. Energy and Buildings, 43, 864-872. https://doi.org/10.1016/j.enbuild.2010.12.006
  17. Papadakis, V. G. (2000). Effect of supplementary cementing materials on concrete resistance against carbonation and chloride ingress. Cement and Concrete Research, 30(2), 291-299. https://doi.org/10.1016/S0008-8846(99)00249-5
  18. Polder, R. B. (2001). Test methods for onsite measurement of resistivity of concrete: A RILEM TC-154 technical recommendation. Construction and Building Materials, 15(2-3), 125-131. https://doi.org/10.1016/S0950-0618(00)00061-1
  19. Sabet, D. B., & Jong, H. C. (2006). Effect of preconditioning of concrete under accelerated test. In 31st Conference on Our World in Concrete and Structures (Vol. 31, pp. 127-134).
  20. Sabet, D. B., & Jong, H. C. (2009). Modeling of carbonation of PC and blended cement concrete. The IES Journal Part A: Civil and Structural Engineering, 2(1), 59-67. https://doi.org/10.1080/19373260802518091
  21. Sabet, D. B., Lim, T. Y. D., & Teng, S. (2012). Ultra durable concrete for sustainable construction. Advanced Materials Research, 368-373, 553-556.
  22. Shi, H. S., Xu, B. W., & Zhou, X. C. (2009). Influence of mineral admixtures on compressive strength, gas permeability and carbonation of high performance concrete. Construction and Building Materials, 23(5), 1980-1985. https://doi.org/10.1016/j.conbuildmat.2008.08.021
  23. Shi, X., Yang, Z., Liu, Y., & Cross, D. (2011). Strength and corrosion properties of Portland cement mortar and concrete with mineral admixtures. Construction and Building Materials, 25, 3245-3256. https://doi.org/10.1016/j.conbuildmat.2011.03.011
  24. Shi, X., Xie, N., Fortune, K.,&Gong, J. (2012). Durability of steel reinforced concrete in chloride environments: An overview. Construction and Building Materials, 30, 125-138. https://doi.org/10.1016/j.conbuildmat.2011.12.038
  25. Teng, S., Lim, T. Y. D., & Sabet, D. B. (2013). Durability and mechanical properties of high strength concrete incorporating ultra fine ground granulated blast-furnace slag. Construction and Building Materials, 40, 875-881. https://doi.org/10.1016/j.conbuildmat.2012.11.052
  26. Wang, P. Z., Trettin, R., & Rudert, V. (2005). Effect of fineness and particle size distribution of granulated blast furnace slag on the hydraulic reactivity in cement systems. Advanced in Cement Research, 17(4), 161-166. https://doi.org/10.1680/adcr.2005.17.4.161

피인용 문헌

  1. Effect of Autoclave Curing on the Microstructure of Blended Cement Mixture Incorporating Ground Dune Sand and Ground Granulated Blast Furnace Slag vol.9, pp.3, 2014, https://doi.org/10.1007/s40069-015-0104-9
  2. Study on the Freeze-Thaw Performance of Concrete Using Granulated Blast-Furnace Slag as Fine Aggregate vol.67, pp.None, 2014, https://doi.org/10.1051/matecconf/20166707022
  3. Pozzolanic reaction of the waste glass sludge incorporating precipitation additives vol.17, pp.2, 2014, https://doi.org/10.12989/cac.2016.17.2.255
  4. Mechanical Properties and Modeling of Amorphous Metallic Fiber-Reinforced Concrete in Compression vol.10, pp.2, 2014, https://doi.org/10.1007/s40069-016-0144-9
  5. Carbonation resistance of GGBS concrete vol.68, pp.18, 2014, https://doi.org/10.1680/jmacr.15.00449
  6. Investigation on Durability Performance in Early Aged High-Performance Concrete Containing GGBFS and FA vol.2017, pp.None, 2014, https://doi.org/10.1155/2017/3214696
  7. Effect of GGBS on Water Absorption Capacity and Stability of Superabsorbent Polymers Partially Crosslinked with Alkalis vol.30, pp.12, 2014, https://doi.org/10.1061/(asce)mt.1943-5533.0002511
  8. Mechanical strength and durability of mineral admixture concrete subjected to accelerated carbonation vol.3, pp.1, 2014, https://doi.org/10.1080/24705314.2018.1426170
  9. Influence of Titanium Dioxide Nanoparticles on the Sulfate Attack upon Ordinary Portland Cement and Slag-Blended Mortars vol.11, pp.3, 2014, https://doi.org/10.3390/ma11030356
  10. Utilizing blast furnace slags (BFS) to prepare high-temperature composite phase change materials (C-PCMs) vol.177, pp.None, 2014, https://doi.org/10.1016/j.conbuildmat.2018.05.110
  11. Performance of plain and slag-blended cements and mortars exposed to combined chloride-sulfate solution vol.30, pp.8, 2014, https://doi.org/10.1680/jadcr.17.00121
  12. Application of Wall and Insulation Materials on Green Building: A Review vol.10, pp.9, 2014, https://doi.org/10.3390/su10093331
  13. Study of Temporal Change in Chloride Diffusion Coefficient of Concrete vol.116, pp.1, 2014, https://doi.org/10.14359/51710966
  14. Material Characterization for Sustainable Concrete Paving Blocks vol.9, pp.6, 2019, https://doi.org/10.3390/app9061197
  15. The effect of slag composition and curing duration on the chloride ingress resistance of slag-blended cements vol.31, pp.5, 2014, https://doi.org/10.1680/jadcr.17.00152
  16. Atmospheric Carbon Capture Performance of Legacy Iron and Steel Waste vol.53, pp.16, 2014, https://doi.org/10.1021/acs.est.9b01265
  17. Utilization of waste from steel and iron industry as replacement of cement in mortars vol.21, pp.6, 2014, https://doi.org/10.1007/s10163-019-00889-3
  18. Prediction of Chloride Penetration Depth Rate and Diffusion Coefficient Rate of Concrete from Curing Condition Variations due to Climate Change Effect vol.13, pp.1, 2014, https://doi.org/10.1186/s40069-019-0333-4
  19. MSWI Bottom Ash Application to Resist Sulfate Attack on Concrete vol.9, pp.23, 2014, https://doi.org/10.3390/app9235091
  20. Hydration Mechanism of Gypsum-Slag Gel Materials vol.32, pp.1, 2014, https://doi.org/10.1061/(asce)mt.1943-5533.0002974
  21. Sustainable mortars containing fly ash, glass powder and blast-furnace and lead-smelter slag vol.72, pp.9, 2014, https://doi.org/10.1680/jmacr.19.00355
  22. Carbonation of loaded RC elements made of different concrete types: Accelerated testing and future predictions vol.243, pp.None, 2014, https://doi.org/10.1016/j.conbuildmat.2020.118259
  23. Reactivity Alteration of Granulated Blast Furnace Slag by Mechanical Activation for High Volume Usage in Portland Slag Cement vol.11, pp.6, 2014, https://doi.org/10.1007/s12649-019-00580-6
  24. Properties of cement mortar incorporated high volume fraction of GGBFS and CKD from 1 day to 550 days vol.30, pp.None, 2014, https://doi.org/10.1016/j.jobe.2020.101327
  25. Effects of Slag and Fly Ash on the Durability of Acrylic Emulsion Polymer-Modified Mortar vol.32, pp.7, 2020, https://doi.org/10.1061/(asce)mt.1943-5533.0003223
  26. Performance evaluation of palm oil clinker sand as replacement for conventional sand in geopolymer mortar vol.258, pp.None, 2014, https://doi.org/10.1016/j.conbuildmat.2020.120352
  27. Interactive Relationship between Cementitious Materials and Acid Mine Drainage: Their Effects on Chromium Cr(VI) Removal vol.10, pp.11, 2014, https://doi.org/10.3390/min10110932
  28. Resistance of phosphogypsum-based supersulfated cement to carbonation and chloride ingress vol.263, pp.None, 2014, https://doi.org/10.1016/j.conbuildmat.2020.120640
  29. The Effects of Temperature Curing on the Strength Development, Transport Properties, and Freeze-Thaw Resistance of Blast Furnace Slag Cement Mortars Modified with Nanosilica vol.13, pp.24, 2014, https://doi.org/10.3390/ma13245800
  30. Development of a WASTE‐BASED ECO‐FRIENDLY structural mortar without Portland cement and natural sand vol.22, pp.suppl1, 2021, https://doi.org/10.1002/suco.202000096
  31. Investigation of Mechanical Properties, Durability and Microstructure of Low-Clinker High-Performance Concretes Incorporating Ground Granulated Blast Furnace Slag, Siliceous Fly Ash and Silica Fume vol.11, pp.2, 2014, https://doi.org/10.3390/app11020830
  32. Green Concrete for a Circular Economy: A Review on Sustainability, Durability, and Structural Properties vol.14, pp.2, 2021, https://doi.org/10.3390/ma14020351
  33. Performance of GGBS Cement Concrete under Natural Carbonation and Accelerated Carbonation Exposure vol.2021, pp.None, 2014, https://doi.org/10.1155/2021/6659768
  34. Investigations on the gamma-ray shielding performance of green concrete using theoretical, experimental and simulation techniques vol.134, pp.None, 2014, https://doi.org/10.1016/j.pnucene.2021.103654
  35. Towards Understanding the Rheological Properties of Slag-Cemented Paste Backfill vol.35, pp.4, 2021, https://doi.org/10.1080/17480930.2020.1807667
  36. Assessment of Mechanical, Thermal and Durability Properties of High-Volume GGBS Blended Concrete Exposed to Cryogenic Conditions vol.14, pp.9, 2021, https://doi.org/10.3390/ma14092129
  37. Microstructure of CEM II/B-S Pastes Modified with Set Accelerating Admixtures vol.14, pp.21, 2014, https://doi.org/10.3390/ma14216300
  38. Screening for key material parameters affecting early-age and mechanical properties of blended cementitious binders with mine tailings vol.15, pp.None, 2021, https://doi.org/10.1016/j.cscm.2021.e00608
  39. Towards green concrete: Study the role of waste glass powder on cement/superplasticizer compatibility vol.47, pp.None, 2014, https://doi.org/10.1016/j.jobe.2021.103751