참고문헌
- Ratmond, G. O.,"Comparison of stress-relife procedures for cryogenic aluminum mirrors," NASA Tech., Report No. 20020061280, pp. 57-70, 2002.
- Joo, H. Y. and Lee, Y. S., "A study on Residual stress at Cutting work," J. of KSMTE, Vol. 6 No. 3, pp. 111-117, 1997.
- Kang, J. P., Kim, B. H. and Song, J. B.,"A Study on the Improvement of Cutting Precision by the Ultrasonic Vibration Cutting," J. of KSPE, Vol. 8 No. 2, pp. 69-77, 1991.
- Kim, N. H., "Selection of the Optimal Machining Condition for a High-hardness Resin using the 5-axis Machine," J. of KSMPE, Vol. 11 No.5, pp. 29-34, 2012.
- Kim, H. T. and Shin, K. H.,"A Study on the Effects of Feed rate and Shotpeening on the Fatigue Life of Al7075-T6 Specimens," Transactions of KSMTE, Vol. 16 No. 4, pp. 64-70, 2007.
- Song, Y. C., Kenichi, T. and Toshimichi, M., "Mirror Finishing of Co-Cr-Mo Alloy by Ultrasonic Elliptical Vibration Cutting Method," J. of KSPE, Vol. 25 No. 3, pp. 56-62, 2008.
- Kim, K. D. and Lee, K. H., "Development of Excitation Table for 2-dimensional Vibrational Micro Cutting," J. of KSMPE, Vol. 11 No. 3, pp. 62-67, 2012.
- Song, Y. C. and Park, C. H.,"Ultra-precision Cutting of Polycarbonate for Optical Components by Using Elliptical Vibration Cutting Method," J. of KSPE, Vol. 26 No. 6, pp. 42-49, 2009.
- Kim, K. D., Loh, B. G. and Kim, J. S., "Development of Ultra-Precision Ultrasonic Surface Machining Device Using Cyclic Elliptical Cutting Motion of a Couple of Piezoelectric Material," J. of KSMPE, Vol. 5 No. 3, pp. 29-35, 2006.
피인용 문헌
- Experimental Verification of Characteristics of Magnetic Abrasive Polishing Combined with Ultrasonic Vibration vol.39, pp.9, 2015, https://doi.org/10.3795/KSME-A.2015.39.9.923
- 초음파 적외선열화상 기법을 적용한 모터 코어의 신뢰성 평가 vol.15, pp.4, 2016, https://doi.org/10.14775/ksmpe.2016.15.4.060
- A Study on Fracture Characteristics in Opening Mode of a DCB Specimen Using a Lightweight Material vol.20, pp.1, 2014, https://doi.org/10.14775/ksmpe.2021.20.01.042
- Fracture Characteristic of Double Cantilever Beam Specimen Using Lightweight Material at Sliding Mode vol.20, pp.3, 2014, https://doi.org/10.14775/ksmpe.2021.20.03.016
- Adhesive Fracture Characteristic of DCB Specimen due to Single and Heterogeneous Materials under Tearing Load vol.20, pp.4, 2014, https://doi.org/10.14775/ksmpe.2021.20.04.127