Abstract
Recently, the construction of curved bridge has increased, thus researchers perform the analytic studies on PSC curved bridge. However, the grid analysis method that are mostly used in the construction industry is not adequate to acquire the precise behavior evaluation of curved PSC briges. Therefore, the precise finite element analysis considering the effective variables were performed to establish the basis for the design method of curved PSC bridge by using 3D elements and bar element. The evaluated variables in this analysis were the number of girders, loading point, section figure, change of prestressing force. The results show the load carrying capacity of the 3 girder type bridge is 200% of that of the 2 girder type, and that applying load on outer girder makes the load resistance capacity and the deflection deviation of 2 girders smaller. The structural capacity of the bridge is improved when the section size is increased, but the efficiency of it is not sufficient enough compare to that of the change of prestressing forces. The change of prestressing forces shows that the camber and the load carrying capacity are linearly increased as PS force is increased. Moreover, when the PS force applied on outer girder is increased than that of inner girder, the deviation of deflection the girders decreases, thereby the stability of the bridge is enhanced.
최근 곡선교 사용이 증가함에 따라 기존 곡선 교량의 한계점을 극복하고자 PSC 곡선 주형을 이용한 곡선교에 대한 해석적 연구가 활발히 진행되고 있다. 그러나 기존의 프레임 요소를 이용한 격자해석방법으로는 PSC 곡선교에 대한 정밀해석이 어렵다. 이에 따라 이 연구에서는 PSC 곡선교의 정밀 유한 요소 해석을 실시하여 프리캐스트 PSC 곡선교의 설계를 위한 참고자료로 사용하고자 한다. 이를 위하여 3차원 솔리드 요소를 사용한 모델링을 실시하고, 거더 수, 하중 재하 위치, 단면 변화, 긴장력 변화 및 편긴장력 도입 여부와 같은 매개변수에 대한 거동을 평가하였다. 해석 결과 경간장 50 m 3주형 교량의 항복하중과 파괴 하중이 경간장 40 m 2주형 교량에 비해 200% 이상의 성능을 보였고, 외측거더에 하중을 가하였을 경우 도심의 위치에 따라 하중저항력 및 거더 간의 처짐 편차가 낮게 평가되는 것으로 나타났다. 또한 거더 단면을 변화시킨 경우 단면의 증가에 따라 구조성능이 향상되는 것으로 나타났으나 PS도입량의 변화에 의한 효과에 비해 경제성과 시공성에서 불리한 것으로 나타났다. PS 도입량 변화에 따른 영향을 분석한 결과 PS 도입량이 증가함에 따라 솟음량과 하중저항력이 비례하여 증가하였으며 거더 간 처짐 편차가 줄어드는 경향을 보였다. 또한, 편긴장력을 도입하였을 시 도입량 증가에 비례하여 내외측 거더 모두에서 하중저항력이 증가하며, 특히 외측거더에 편긴장력이 도입되었을 때 더 우수한 성능을 보이는 것으로 나타나, PSC 곡선교의 경제성 및 안정성을 확보하는데 효율적인 것으로 나타났다.