한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제31권7호
  • /
  • Pages.597-604
  • /
  • 2014
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지
DOI QR코드

DOI QR Code

생산효율의 향상을 위한 설계정보의 재사용이 가능한 CAD/CAM 시스템 개발

Development of CAD/CAM System with Reusable Design Information for Improving Production Efficiency

  • 강봉구 (한국산업기술대학교 대학원 기계공학과) ;
  • 이종항 (한국산업기술대학교 기계공학과)
  • Kang, Bong Ku (Department of Mechanical Engineering, Korea Polytechnic Univ.) ;
  • Lee, Jong Hang (Department of Mechanical Engineering, Korea Polytechnic Univ.)
  • 투고 : 2014.04.23
  • 심사 : 2014.06.03
  • 발행 : 2014.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

High efficiency production requires the improved performance of CAD/CAM system. Although the CAD and CAM have been significantly developed over the last three decades, they must still study on the reuse of information during process. In this study, we developed a new integrated CAD/CAM system which can reuse the information generated in previous processes, in order to improve its performance. In addition, the developed system was verified by comparing with working-time, and system reproducibility was also examined with tolerance in the unmanned operation. Experimental results showed 58% reduction in working-time of 2D Auto-CAM module, 80% in case of 3D Auto-Exchange module, and 54.5% in case of Auto-Design module.

키워드

참고문헌

  1. Lee, S. H., Jang, J. W., and Woo, Y. H., "KMU-Mold: A Solid Mold Design System based on Unigraphics," Proc. of CAD/CAM Engineers Winter Conference, pp. 421-426, 2003.
  2. Hong, M. S., "Knowledge Based Engineering," CAD/CAM Review, Vol. 8, No. 1, pp. 34-36, 2002.
  3. Kim, S. R., Im, S. L., and Lee, S. H., "A Mold Base Design System based on a Knowledge Based Engineering System," Proc. of KSPE Spring Conference, pp. 1467-1470, 2003.
  4. Cho, Y. M. and Wang, K. K., "Development of Plastic Injection Mold Design System on the CAD Environment," J. Korean Soc. Precis. Eng., Vol. 15, No. 2, pp. 68-74, 1998.
  5. Han, S. H., "In the Drawing, 2D Reconstruction of 3D Model," CAD & Graphics, No. 6, pp. 132-135, 2000.
  6. Son, Y. J., Kim, S. K., and Jeon, E. C., "A Study of Development of Program for CAM and DB Construction of the Processing Information using DCL," J. Korean Soc. Precis. Eng., Vol. 16, No. 9, pp.143-148, 1999.
  7. Kang, B. K., "Development of Automatic Transfer Program from 2D Information to 3D Model and CAM Data," M.Sc. Thesis, Department of Mechanical Engineering, Korea Polytechnic University, 2011.