Wind and Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Optimum bracing design under wind load by using topology optimization

  • Kutuk, M. Akif (Department of Mechaniscal Engineering, University of Gaziantep) ;
  • Gov, Ibrahim (Department of Mechaniscal Engineering, University of Gaziantep)
  • Received : 2012.11.24
  • Accepted : 2014.01.15
  • Published : 2014.05.25
⟨ Previous Next ⟩

Abstract

Seismic and wind load performances of buildings are commonly improved by using bracing systems. In practice, standard bracing systems, such as X, Y, V, and K types are used. To determine the appropriate bracing type, the designer uses trial & error method among the standard bracings to obtain better results. However, using topology optimization yields more efficient bracing systems or new bracing can be developed depending on building and loading types. Determination of optimum bracing type for minimum deformation on a building under the effect of wind load is given in this study. A new bracing system is developed by using topology optimization. Element removal method is used to determine and remove the comparatively inefficient materials. Optimized bracing is compared with proposed bracing types available in the related literature. Maximum deformation value of building is used as performance indicator to compare effectiveness of different bracings to resist wind loads. The proposed bracing, yielded 99%, deformation reduction compared to the unbraced building.

Keywords

References

  1. Abou-Elfath, H. and Ghobarah, A. (2000), "Behavior of reinforced concrete frames rehabilitated with concentric steel bracing", Can. J. Civil. Eng., 27(3), 433-444. https://doi.org/10.1139/l99-092
  2. Bendsoe, M.P. and Sigmund, O. (2002), Topology optimization theory, methods, and applications, Springer press.
  3. Chan, C., Grierson, D.E. and Sherbourne, A.N. (1995), "Automatic optimal design of tall steel building frameworks", J. Struct. Eng -ASCE, 121(5), 838-847. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:5(838)
  4. Dulyachot, C. (2006), "A stress-based material distribution method for optimum shape design of mechanical parts", Thammasat Int. J. Sci. Tech, 11(3),
  5. Ghaffarzadeh, H. and Maheri, M.R. (2006), "Mechanical compression release device in steel bracing system for retrofitting RC frames", Earthq. Eng. Eng. Vib., 5(1), 151-158. https://doi.org/10.1007/s11803-006-0626-x
  6. Ghobarah, A. and Abou-Elfath, H. (2001), "Rehabilitation of a reinforced concrete frame using eccentric steel bracing", Eng. Struct., 23(7), 745-755. https://doi.org/10.1016/S0141-0296(00)00100-0
  7. Gov, I. (2009), Applying topology optimization to design of planer machine parts, M.Sc. thesis in mechanical engineering, University of Gaziantep.
  8. Hajirasouliha, I., Pilakoutas, K. and Moghaddam, H. (2011), "Topology optimization for the seismic design of truss-like structures", Comput Struct., 89(7-8), 702-711. https://doi.org/10.1016/j.compstruc.2011.02.003
  9. James, K.G. and Jean, H.P. (2006), "Optimizing multifunctional materials: design of microstructures for maximized stiffness and fluid permeability", Int. J. Solids Struct, 43(22-23), 7028-7047. https://doi.org/10.1016/j.ijsolstr.2006.03.001
  10. Kareem, A., Kijewski, T. and Tamura, Y. (1999), "Mitigation of motions of tall buildings with specific examples of recent applications", Wind Struct., 2(3), 201-251. https://doi.org/10.12989/was.1999.2.3.201
  11. Liang, Q.Q., Xie, Y.M. and Steven, G.P. (2000), "Optimal topology design of bracing systems for multistory steel frames", J. Struct Eng. -ASCE, 126(7), 823-829. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:7(823)
  12. Maheri, M.R. and Akbari, R. (2003), "Seismic behaviour factor, R, for steel X-braced and knee-braced RC buildings", Eng. Struct., 25(12), 1505-1513. https://doi.org/10.1016/S0141-0296(03)00117-2
  13. Maheri, M.R. and Sahebi, A. (1997), "Use of steel bracing in reinforced concrete frames", Eng. Struct., 19 (12), 1018-1024. https://doi.org/10.1016/S0141-0296(97)00041-2
  14. Maheri, M.R, Kousari, R. and Razazan, M. (2003), "Pushover tests on steel X-braced and knee-braced RC frames", Eng. Struct, 25(13),1697-1705. https://doi.org/10.1016/S0141-0296(03)00150-0
  15. Mazza, F. and Vulcano, A. (2007), "Control of the along-wind response of steel framed buildings by using viscoelastic or friction dampers", Wind Struct., 10(3), 233-247. https://doi.org/10.12989/was.2007.10.3.233
  16. Mazza, F. and Vulcano, A. (2011), "Control of the earthquake and wind dynamic response of steel-framed buildings by using additional braces and/or viscoelastic dampers", Earthq. Eng. Struct. D., 40(2), 155-174. https://doi.org/10.1002/eqe.1012
  17. Mei, Y. and Wang, X. (2004), "A level set method for structural topology optimization and its applications", Adv. Eng. Softw., 35(7), 415-444. https://doi.org/10.1016/j.advengsoft.2004.06.004
  18. Mijar, A.R, Swan, C.C, Arora, J.S. and Kosaka, I. (1998), "Continuum topology optimization for concept design of frame bracing systems", J. Struct. Eng. -ASCE, 124 (5), 541-550. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:5(541)
  19. Noilublao, N. and Bureerat, S. (2011), "Simultaneous topology, shape and sizing optimisation of a three-dimensional slender truss tower using multi objective evolutionary algorithms", Comput. Struct., 89(23-24),2531-2538. https://doi.org/10.1016/j.compstruc.2011.08.010
  20. Ozel, A.E. (2010), Assessing effects of type and distribution of eccentric steel braces on seismic vulnerability a/mid-rise reinforced concrete buildings, M.Sc. thesis in civil engineering, University of Gaziantep.
  21. Pasi Tanskanen (2002), "The evolutionary structural optimization method: theoretical aspects", Comput Method Appl. M, 191(47-48), 5485-5498. https://doi.org/10.1016/S0045-7825(02)00464-4
  22. Chang, S.Y. and Youn, S.K. (2006), "Material cloud method - its mathematical investigation and numerical application for 3D engineering design", Int. J. Solids Struct., 43(17), 5337-5354. https://doi.org/10.1016/j.ijsolstr.2005.07.039
  23. Youssef, M.A, Ghaffarzadeh, H. and Nehdi, M. (2007), "Seismic performance of RC frames with concentric internal steel bracing", Eng. Struct., 29(7), 1561-1568. https://doi.org/10.1016/j.engstruct.2006.08.027

Cited by

  1. Topology optimization of bracing systems using a truss-like material model vol.58, pp.2, 2016, https://doi.org/10.12989/sem.2016.58.2.231