DOI QR코드

DOI QR Code

Implication of rubber-steel bearing nonlinear models on soft storey structures

  • Saiful Islam, A.B.M. (Department of Civil Engineering, Faculty of Engineering, University of Malay) ;
  • Hussain, Raja Rizwan (Department of Civil Engineering, College of Engineering, King Saud University) ;
  • Jumaat, Mohammed Zamin (Department of Civil Engineering, Faculty of Engineering, University of Malay) ;
  • Mahfuz ud Darain, Kh. (Department of Civil Engineering, Faculty of Engineering, University of Malay)
  • 투고 : 2012.05.08
  • 심사 : 2013.12.27
  • 발행 : 2014.05.28

초록

Soft storey buildings are characterised by having a storey that has a large amount of open space. This soft storey creates a major weak point during an earthquake. As the soft stories are typically associated with retail spaces and parking garages, they are often on the lower levels of tall building structures. Thus, when these stories collapse, the entire building can also collapse, causing serious structural damage that may render the structure completely unusable. The use of special soft storey is predominant in the tall building structures constructed by several local developers, making the issue important for local building structures. In this study, the effect of the incorporation of an isolator on the seismic behaviour of tall building structures is examined. The structures are subjected to earthquakes typical of the local city, and the isolator is incorporated with the appropriate isolator time period and damping ratio. A FEM-based computational relationship is proposed to increase the storey height so as to incorporate the isolator with the same time period and damping ratio for both a lead rubber bearing (LRB) and high-damping rubber bearing (HDRB). The study demonstrates that the values of the FEM-based structural design parameters are greatly reduced when the isolator is used. It is more beneficial to incorporate a LRB than a HDRB.

키워드

참고문헌

  1. Ariga, T., Kanno, Y. and Takewaki, I. (2006), "Resonant behaviour of base-isolated high-rise buildings under long-period ground motions", Struct. Des. Tall Spec. Build., 15(3), 325-338. https://doi.org/10.1002/tal.298
  2. Ates, S. (2012), "Investigation of effectiveness of double concave friction pendulum bearings", Comput. Concr., 9(3), 195-213. https://doi.org/10.12989/cac.2012.9.3.195
  3. Ates, S. and Yurdakul, M. (2011), "Site-response effects on RC buildings isolated by triple concave friction pendulum bearings", Comput. Concr., 8(6), 693-715. https://doi.org/10.12989/cac.2011.8.6.693
  4. Bangladesh National Building Code (1993), BNBC. Bangladesh: Housing and Building Research Institute, Bangladesh Standard and Testing Institute.
  5. Chen, Y.Q. and Constantinou, M.C. (1990), "Use of Teflon sliders in a modification of the concept of soft first storey", Eng. Struct., 12(4), 243-253. https://doi.org/10.1016/0141-0296(90)90023-L
  6. Chen, Y.Q. and Constantinou, M.C. (1992), "Use of Teflon sliders in a modification of the concept of soft first storey", Construct. Build. Mater., 6(2), 97-105. https://doi.org/10.1016/0950-0618(92)90058-7
  7. Dall'Asta, A. and Ragni, L. (2006), "Experimental tests and analytical model of high damping rubber dissipating devices", Eng. Struct., 28(13), 1874-1884. https://doi.org/10.1016/j.engstruct.2006.03.025
  8. Dall'Asta, A. and Ragni, L. (2008), Nonlinear behavior of dynamic systems with high damping rubber devices, Eng. Struct., 30(12), 3610-3618. https://doi.org/10.1016/j.engstruct.2008.06.003
  9. Habibullah, A. (2005), SAP 2000, Static and Dynamic Finite Element Analysis of Structures. Computers and Structures Inc. Berkeley, California.
  10. Hussain, R.R., Saiful, I.A.B.M. and Ahmad, S.I. (2010), "Base Isolators as Earthquake Protection Devices in Buildings (First ed.): VDM Publishing House Ltd. Benoit Novel", Simultaneously published in USA & U.K.
  11. Islam, A.B.M.S., Ahmad, S.I., Jameel, M. and Zamin, M.J. (2012a), "Seismic base isolation for buildings in regions of low to moderate seismicity: practical alternative design", Pract. Period. Struct. Des. Construct., 17(1), 13-20. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000093
  12. Islam, A.B.M.S., Hussain, R.R., Jameel, M. and Jumaat, M.Z. (2012b), "Non-linear time domain analysis of base isolated multi-storey building under site specific bi-directional seismic loading", Autom. Construct., 22, 554-566. https://doi.org/10.1016/j.autcon.2011.11.017
  13. Islam, A.B.M.S., Hussain, R.R., Jumaat, M.Z. and Rahman, M.A. (2013a), "Nonlinear dynamically automated excursions for rubber-steel bearing isolation in multi-storey construction", Autom. Construct., 30(0), 265-275. https://doi.org/10.1016/j.autcon.2012.11.010
  14. Islam, A.B.M.S., Jameel, M., Ahmad, S.I. and Jumaat, M.Z. (2011a), "Study on corollary of seismic base isolation system on buildings with soft story", Int. J. Phys.. Sci., 6(11), 2654-2661.
  15. Islam, A.B.M.S., Jameel, M., Ahmad, S.I., Salman, F.A. and Jumaat, M.Z. (2011b), "Engendering earthquake response spectra for Dhaka region usable in dynamic analysis of structures", Sci. Search Essays, 6(16), 3519-3530. https://doi.org/10.5897/SRE11.218
  16. Islam, A.B.M.S., Jameel, M., Jumaat, M.Z. and Rahman, M.M. (2013b), "Optimization in structural altitude for seismic base isolation at medium risk earthquake disaster region", Disaster Adva., 6(1), 23-34.
  17. Islam, A.B.M.S., Jameel, M., Rahman, M.A. and Jumaat, M.Z. (2011c), "Earthquake Time history for Dhaka, Bangladesh as competent seismic record", Int. J. Phys. Sci., 6(16), 3921-3926.
  18. Islam, A.B.M.S., Jameel, M., Uddin, M.A. and Ahmad, S.I. (2011d), "Simplified design guidelines for seismic base isolation in multi-storey buildings for Bangladesh National Building Code (BNBC), Int. J. the Phys. Sci., 6(23), 5467 - 5486.
  19. Islam, A.B.M.S., Jameel, M., Uddin, M.A. and Jumaat, M.Z. (2012c), "Competent Building Elevation for Incorporating Base Isolation in Aseismic Structure", Procedia Eng., 50(0), 882-892. https://doi.org/10.1016/S1877-7058(14)00002-2
  20. Jangid, R.S. (2007), "Optimum lead-rubber isolation bearings for near-fault motions", Eng. Struct., 29(10), 2503-2513. https://doi.org/10.1016/j.engstruct.2006.12.010
  21. Khoshnoudian, F. and Azad, A.I. (2011), "Effect of two horizontal components of earthquake on nonlinear response of torsionally coupled base isolated structures", Struct. Des. Tall Spec.Build., 20(8), 986-1018. https://doi.org/10.1002/tal.571
  22. Kilar, V. and Koren, D. (2009), "Seismic behaviour of asymmetric base isolated structures with various distributions of isolators", Eng. Struct., 31(4), 910-921. https://doi.org/10.1016/j.engstruct.2008.12.006
  23. Kirac, N., Dogan, M. and Ozbasaran, H. (2011), "Failure of weak-storey during earthquakes", Eng. Fail. Anal., 18(2), 572-581. https://doi.org/10.1016/j.engfailanal.2010.09.021
  24. Mo, Y.L. and Chang, Y.F. (1995), "Application of base isolation concept to soft first story buildings", Comput. Struct., 55(5), 883-896. https://doi.org/10.1016/0045-7949(94)00433-4
  25. Sharma, A. and Jangid, R.S. (2011), "Influence of high initial isolator stiffness on the seismic response of a base-isolated benchmark building", Int. J. Struct. Stab. Dyn., 11(6), 1201-1228 https://doi.org/10.1142/S0219455411004543
  26. Sharma, A. and Jangid, R.S. (2012), "Performance of variable curvature sliding isolators in base-isolated benchmark building", Struct. Des. Tall Spec.Build., 21(5), 354-373. https://doi.org/10.1002/tal.600
  27. Soni, D.P., Mistry, B.B., Jangid, R.S. and Panchal, V.R. (2011), "Seismic response of the double variable frequency pendulum isolator", Struct. Control Health Monit., 18(4), 450-470. https://doi.org/10.1002/stc.384
  28. Uniform Building Code (UBC) (1997), "Earthquake regulations for seismic isolated structures", Paper presented at the International conference of building officials, Whitter (CA,USA).
  29. Wibowo, A., Wilson, J.L., Lam, N.T.K. and Gad, E.F. (2010), "Collapse modelling analysis of a precast soft storey building in Australia", Eng. Struct., 32(7), 1925-1936. https://doi.org/10.1016/j.engstruct.2010.03.003
  30. Wilkinson, S. and Hiley, R. (2006), "A non-linear response history model for the seismic analysis of highrise framed buildings", Comput. Struct., 84(5-6), 318-329. https://doi.org/10.1016/j.compstruc.2005.09.021
  31. Yoshimura, M. (1997), "Nonlinear analysis of a reinforced concrete building with a soft first story collapsed by the 1995 Hyogoken-Nanbu earthquake", Cement Concrete Compos., 19(3), 213-221. https://doi.org/10.1016/S0958-9465(97)00016-4

피인용 문헌

  1. Retrofitting of vulnerable RC structures by base isolation technique vol.9, pp.3, 2015, https://doi.org/10.12989/eas.2015.9.3.603
  2. Comparing calculation methods of storey stiffness to control provision of soft storey in seismic codes vol.11, pp.1, 2016, https://doi.org/10.12989/eas.2016.11.1.001
  3. Incorporation preference for rubber-steel bearing isolation in retrofitting existing multi storied building vol.16, pp.4, 2015, https://doi.org/10.12989/cac.2015.16.4.503
  4. Potential Design of Seismic Vulnerable Buildings Incorporating Lead Rubber Bearing vol.9, pp.2, 2019, https://doi.org/10.3390/buildings9020037
  5. Determination of bearing type effect on elastomeric bearing selection with SREI-CAD vol.2, pp.1, 2014, https://doi.org/10.12989/acd.2017.2.1.043
  6. Identifying stiffness irregularity in buildings using fundamental lateral mode shape vol.12, pp.4, 2017, https://doi.org/10.12989/eas.2017.12.4.437
  7. Seismic response variation of multistory base-isolated buildings applying lead rubber bearings vol.21, pp.5, 2014, https://doi.org/10.12989/cac.2018.21.5.495
  8. Computer aided failure prediction of reinforced concrete beam vol.25, pp.1, 2020, https://doi.org/10.12989/cac.2020.25.1.067