초록
본 논문은 마이크로파와 고온발열체에 의한 유류오염토양의 정화효율에 관한 연구를 정리한 것이다. 수분의 함량은 처리량에 따라 측정이 되었는데 상대적으로 짧은 시간에 300 g에 도달했다. TPH(Total Petroleum Hydrocarbons)처리 속도는 SiC 발열체를 단독으로 사용했을 때와 비교하였을 때, SiC와 활성탄을 4 kW/kg에서 동시에 사용했을 때 70.1%의 제거율로 가장 높은 값을 보여주었다. 특히, 3 kW/kg때를 제외하고는 전력이 증가할수록 처리속도도 증가하였다. SiC와 활성탄으로 제작된 발열체를 사용할 경우, 내부 온도가 $300^{\circ}C$를 초과하였으며, 4 kW로 2분동안 유지되었을 때 온도가 다시 하락하였으나, 8분이후에는 다시 온도가 상승하였다. 이러한 결과를 기초로 하여, 샘플을 처리하기 위한 에너지량은 마이크로파의 전력에 따라 계산이 되었으며, TPH처리 상수는 유류오염토양의 처리 특성에 관한 다양한 실험에 의해 측정이 되었다.
This study was conducted to observe the removal efficiency of oil-contaminated soil by various tests using microwaves and high-temperature heating elements. The water content was measured with the treatment amount, which was lowered to 300g in a relatively short amount of time. The treatment rate of TPH(Total Petroleum Hydrocarbons) showed the highest value with 70.1% when the SiC-activated carbon heating element was at 4 kW/kg, compared to the SiC heating element used alone. In particular, the higher electric power became, the higher treatment rate became, except at 3 kW. In the case of the heating element made by the fusion of SiC and activated carbon, the internal temperature exceeded $300^{\circ}C$ and again fell when it was treated at 4 kW for about 2 minutes. Then, after about 8 minutes, it rose again. On the basis of such results, the energy content necessary for the sample was calculated according to the electric power of microwaves, and tthe constant of TPH treatment was measured by tests on the treatment characteristics of oil-contaminated soil.