DOI QR코드

DOI QR Code

Development on an Automatic Calibration Module of the SWMM for Watershed Runoff Simulation and Water Quality Simulation

유역유출 및 수질모의에 관한 SWMM의 자동 보정 모듈 개발

  • 강태욱 (한국수자원공사 K-water연구원) ;
  • 이상호 (부경대학교 공과대학 토목공학과)
  • Received : 2013.12.16
  • Accepted : 2014.03.17
  • Published : 2014.04.30

Abstract

The SWMM (storm water management model) has been widely used in the world and is a watershed runoff simulation model used for a single event or a continuous simulation of runoff quantity and quality. However, there are many uncertain parameters in the watershed runoff continuous simulation module and the water quality module, which make it difficult to use the SWMM. The purpose of the study is to develop an automatic calibration module of the SWMM not only for watershed runoff continuous simulation, but also water quality simulation. The automatic calibration module was developed by linking the SWMM with the SCE-UA (shuffled complex evolution-University of Arizona) that is a global optimization algorithm. Estimation parameters of the SWMM were selected and search ranges of them were reasonably configured. The module was validated by calibration and verification of the watershed runoff continuous simulation model and the water quality model for the Donghyang Stage Station Basin. The calibration results for watershed runoff continuous simulation model were excellent and those for water quality simulation model were generally satisfactory. The module could be used in various studies and designs for watershed runoff and water quality analyses.

SWMM은 홍수유출 해석, 유역유출 연속모의, 수질모의가 가능한 모형으로서 전세계적으로 널리 사용되고 있는 모형이다. 하지만 유역유출 연속모의와 수질모의에는 다수의 불명확한 매개변수가 포함되어 있으므로 이는 SWMM의 사용에 제약이 되고 있다. 본 연구의 목적은 SWMM을 이용한 유역유출 연속모의와 수질모의의 정확도를 높이고 효율성을 향상시킬 수 있도록 자동 보정 모듈을 개발하는 것이다. SWMM의 자동 보정 모듈은 전역최적화 알고리즘인 집합체 혼합진화 알고리즘과 SWMM을 연계하고, SWMM 내 추정대상 매개변수의 선정 및 적절한 탐색 범위를 설정함으로써 개발되었다. 개발된 자동 보정 모듈의 적절성은 동향 수위관측소 유역에 대하여 구성된 유역유출 및 수질모의 모형의 보정 및 검증을 통해 검토되었다. 그 결과, 자동 보정 모듈을 통해 보정된 모형은 유역의 유출현상을 매우 잘 모사하였고, 수질의 경우에도 비교적 양호한 결과를 도출하였다. 개발된 자동 보정 모듈은 향후 유역유출 모의와 수질해석에 관한 다양한 연구와 설계 등에 활용될 수 있을 것이다.

Keywords

References

  1. Barco, J., Wong, K.M., and Stenstrom, M.K. (2008). "Automatic calibration of the U.S. EPA SWMM model for a large urban catchment." Journal of Hydraulic Engineering, Vol. 134, No. 4, pp. 466-474. https://doi.org/10.1061/(ASCE)0733-9429(2008)134:4(466)
  2. Chae, J. (2004). Study of runoff management scheme in urbanization area using XP-SWMM. M.Sc. thesis, Paichai University, Daejeon, Korea.
  3. Cho, J., and Lee, J. (2006). "Parameter optimization for runoff calibration of SWMM." Journal of Environmental Impact Assessment, Korean Society Environmental Impact Assessment, Vol. 15, No. 6, pp. 435-441.
  4. Choi, J.Y. (2004). Emission characteristic and management plan of non point source. Water Journal.
  5. Choi, K., and Ball, J.E. (2002). "Parameter estimation for urban runoff modelling." Urban Water, Vol. 4, No. 1, pp. 31-41. https://doi.org/10.1016/S1462-0758(01)00072-3
  6. Donigian, A.S., Jr., Imhoff, J.C., Bicknell, B.R., and Kittle, J.L., Jr. (1984). Application guide for Hydrological Simulation Program-Fortran (HSPF). EPA-600/3-84-065, U.S. Environmental Protection Agency, Athens, Georgia.
  7. Duan, Q. (1991). A global optimization strategy for efficient and effective calibration of hydrologic models. Ph.D. dissertation, University of Arizona, Tucson, Arizona, USA.
  8. Duan, Q., Gupta, V., and Sorooshian, S. (1994). "Optimal use of the SCE-UA global optimization method for calibrating watershed models." Journal of Hydrology, Vol. 158, pp. 265-284. https://doi.org/10.1016/0022-1694(94)90057-4
  9. Duan, Q., Sorooshian, S., and Gupta, V. (1992). "Effective and efficient global optimization for conceptual rainfall-runoff models." Water Resources Research, Vol. 28, No. 4, pp. 1015-1031. https://doi.org/10.1029/91WR02985
  10. Fang, T., and Ball, J.E. (2007). "Evaluation of spatially variable parameters in a complex system: an application of a genetic algorithm." Journal of Hydroinformatics, Vol. 9, No. 3. pp. 163-173. https://doi.org/10.2166/hydro.2007.026
  11. Holland, J.H. (1975). Adaptation in Natural and Artificial Systems. University of Michigan Press, Ann Arbor.
  12. Huber, W.C., and Dickinson, R.E. (1992). Storm Water Management Model, Version 4: User's Manual. EPA/ 600/3-88/001a, U.S. Environmental Protection Agency, Athens, Georgia.
  13. James, W., Huber, W.C., Dickinson, R.E., Pitt, R.E., James, W.R.C., Roesner, L.A., and Aldrich, J.A. (2005). User's guide to SWMM. CHI, Ontario, Canada.
  14. Javaheri, H. (1998). Automatic calibration of urban runoff models using global optimization techniques. M.Sc. thesis, McGill University, Montreal, Canada.
  15. Kang, T. (2013). Embedding an adaptive penalty function in the SCE-UA and its application to parameter estimation of a watershed runoff simulation model. Ph.D. dissertation, Pukyong National University, Busan, Republic of Korea.
  16. Kang, T., Lee, S. (2012) "A Study for a Reasonable Application of the SWMM to Watershed Runoff Event Simulation." Journal of Korean Society of Hazard Mitigation, Korean Society of Hazard Mitigation, Vol. 12, No. 6, pp. 247-258. https://doi.org/10.9798/KOSHAM.2012.12.6.247
  17. Kang, T., Lee, S., Kang, S., and Park, J. (2012). "A study for an automatic calibration of urban runoff model by the SCE-UA." Journal of Korea Water Resources Association, Korea Water Resources Association, Vol. 45, No. 1, pp. 15-27. https://doi.org/10.3741/JKWRA.2012.45.1.15
  18. Korea Water Resources Corporation. (2009). Survey of Water Resources and Environment for the Geumgang Basin in 2010. Chungcheong Regional Council.
  19. Korea Water Resources Corporation. (2010). Survey of Water Resources and Environment for the Geumgang Basin in 2010. Chungcheong Regional Council.
  20. Moriasi, D.N., Arnold, J.G., Van Liew, M.W., Bingner, R.L., Harmel, R.D., and Veith, T.L. (2007). "Model evaluation guidelines for systematic quantification of accuracy in watershed simulations." Transactions of the ASABE, Vol. 50, No. 3, pp. 885-900. https://doi.org/10.13031/2013.23153
  21. National Institute of Environmental Research. (2006). Evaluation of Non-Point Sources Loadings (1)-Impervious Land-. NIER No. 2006-34-816, Environmental Cap System Research Department, p. 18.
  22. Nelder, J.A., and Mead, R. (1965). "A simplex method for function minimization." Computer Journal, Vol. 7, No. 4, pp. 308-313. https://doi.org/10.1093/comjnl/7.4.308
  23. Price, W.L. (1987). "Global optimization algorithms for a CAD workstation." Journal of Optimization Theory and Applications, Vol. 55, No. 1, pp. 133-146. https://doi.org/10.1007/BF00939049
  24. Rossman, L.A. (2010). Storm Water Management Model User's Manual Version 5.0. EPA/600/R-05/040, National Risk Management Research Laboratory, Environmental Protection Agency, Cincinnati, Ohio.
  25. Wan, B. (2001). Auto-calibration of SWMM RUNOFF using sensitivity-based genetic algorithm. M.Sc. thesis, University of Guelph, Canada.

Cited by

  1. A Multi-Criteria Decision Analysis System for Prioritizing Sites and Types of Low Impact Development Practices: Case of Korea vol.9, pp.4, 2017, https://doi.org/10.3390/w9040291
  2. Application of the SCE-UA to Derive Zone Boundaries of a Zone Based Operation Rule for a Dam vol.47, pp.10, 2014, https://doi.org/10.3741/JKWRA.2014.47.10.921
  3. Application of LID Methods for Sustainable Management of Small Urban Stream Using SWMM vol.36, pp.10, 2014, https://doi.org/10.4491/KSEE.2014.36.10.691
  4. A Simulation Method for Reduction Facilities of Natural Type for Non-Point Pollution by the SWMM vol.16, pp.2, 2016, https://doi.org/10.9798/KOSHAM.2016.16.2.123
  5. Development of Integrated Management System of Stormwater Retention and Treatment in Waterside Land for Urban Stream Environment vol.37, pp.2, 2015, https://doi.org/10.4491/KSEE.2015.37.2.126