한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제31권5호
  • /
  • Pages.367-373
  • /
  • 2014
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지
DOI QR코드

DOI QR Code

연삭기법을 이용한 패터닝 기술

Grinding Technology for Surface Texturing

  • Ko, Tae Jo (School of Mechanical Engineering, Yeungnam Univ.) ;
  • Han, Do Sup (School of Mechanical Engineering, Yeungnam Univ.) ;
  • Qiu, Kang (School of Mechanical Engineering, Yeungnam Univ.) ;
  • Park, Jong-Kweon (Department of Ultra Precision Machines and Systems, KIMM)
  • 투고 : 2014.03.19
  • 심사 : 2014.04.24
  • 발행 : 2014.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Surface texturing is a machining process on the surface to give engineering functions. The representative process of the surface texturing is lotus effect to give hydrophobic property by the lithography and chemical etching, which is the bio mimic from the nature. Surface texturing can be manufactured by a lot of processes, in particular using mechanical method such as a precise diamond turning, grinding, rolling, embossing, vibrorolling, and abrasive jet machining (AJM). Among them, the grinding process is notable in terms of the wide range of texturing area and fast processing time. The patterning by grinding is done by the grooved grinding wheel on the work piece. In this case, the pattern shape is determined by the grinding conditions as well as the wheel dressing conditions. In this paper, experimental study on the pattern shapes were done and provide the feasibility in use for the large area patterning.

키워드

참고문헌

  1. Scholz, S., Griffiths, C., Dimov, S., Brousseau, E., Lalev, G., and et al., "Manufacturing Routes for Replicating Micro and Nano Surface Structures with Bio-mimetic Applications," CIRP J. Manufacturing Science and Technology, Vol. 4, No. 4, pp. 347-356, 2011. https://doi.org/10.1016/j.cirpj.2011.05.004
  2. Etsion, I., "Improving Tribological Performance of Mechanical Components by Laser Surface Texturing," Tribology Letters, Vol. 17, No. 4, pp. 733-737, 2004. https://doi.org/10.1007/s11249-004-8081-1
  3. Pettersson, U. and Jacobson, S., "Influence of Surface Texture on Boundary Lubricated Sliding Contacts," Tribology International, Vol. 36, No. 11, pp. 857-864, 2003. https://doi.org/10.1016/S0301-679X(03)00104-X
  4. Vilhena, L., Sedlaček, M., Podgornik, B., Vizintin, J., Babnik, A., and et al., "Surface Texturing by Pulsed Nd: Yag Laser," Tribology International, Vol. 42, No. 10, pp. 1496-1504, 2009. https://doi.org/10.1016/j.triboint.2009.06.003
  5. Wakuda, M., Yamauchi, Y., Kanzaki, S., and Yasuda, Y., "Effect of Surface Texturing on Friction Reduction between Ceramic and Steel Materials under Lubricated Sliding Contact," Wear, Vol. 254, No. 3, pp. 356-363, 2003. https://doi.org/10.1016/S0043-1648(03)00004-8
  6. Samanek, O., Zimmerman, M., Svoboda, P., Krupka, I., and Vrbka, M., "Influence of Surface Texturing on Lubricant Film Formation and Surface Fatigue," Engineering Mechanics, Vol. 17, No. 1, pp. 27-36, 2010.
  7. Klocke, F., Feldhaus, B., and Mader, S., "Development of an Incremental Rolling Process for the Production of Defined Riblet Surface Structures," Production Engineering, Vol. 1, No. 3, pp. 233-237, 2007. https://doi.org/10.1007/s11740-007-0031-y
  8. Matsumura, T. and Takahashi, S., "Micro Dimple Milling on Cylinder Surfaces," Journal of Manufacturing Processes, Vol. 14, No. 2, pp. 135-140, 2012.
  9. Greco, A., Lin, C., Raphaelson, S., Ehmann, K., and Wang, Q. J., "Surface Texturing of Tribological Interfaces using the Vibromechanical Texturing Method," Journal of Manufacturing Science and Engineering, Vol. 131, No. 6, Paper No. 061005, 2009.
  10. Kurniawan, R. and Ko, T. J., "A Study of Surface Texturing using Piezoelectric Tool Holder Actuator on Conventional CNC turning," Int. J. Precis. Eng. Manuf., Vol. 14, No. 2, pp. 199-206, 2013. https://doi.org/10.1007/s12541-013-0028-8
  11. StC, P., "Regular Surface Texture Generated by Special Grinding Process," Journal of Manufacturing Science and Engineering, Vol. 131, No. 1, Paper No. 011015, 2009.
  12. Denkena, B., Köhler, J., and Wang, B., "Manufacturing of Functional Riblet Structures by Profile Grinding," CIRP Journal of Manufacturing Science and Technology, Vol. 3, No. 1, pp. 14-26, 2010. https://doi.org/10.1016/j.cirpj.2010.08.001