제어로봇시스템학회논문지 (Journal of Institute of Control, Robotics and Systems)

  • 제20권11호
  • /
  • Pages.1147-1152
  • /
  • 2014
  • /
  • 1976-5622(pISSN)
  • /
  • 2233-4335(eISSN)
제어로봇시스템학회 (Institute of Control, Robotics and Systems)
권호 표지
DOI QR코드

DOI QR Code

4축 힘/토크 센서의 구조 설계

Design of Structure of Four-Axis Force/Torque Sensor with Parallel Step Plate Beams

  • 이경준 (경상대학교 제어계측공학과, ERI) ;
  • 김갑순 (경상대학교 제어계측공학과, ERI)
  • Lee, Kyung-Jun (Department of Control and Instrumentation Engineering, Gyeongsang National University) ;
  • Kim, Gab-Soon (Department of Control and Instrumentation Engineering, Gyeongsang National University)
  • 투고 : 2014.07.16
  • 심사 : 2014.10.06
  • 발행 : 2014.11.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper describes the design of a four-axis force/torque sensor with PSPBs (Parallel Step Plate Beams). The sensor is composed of eight PSPBs, a force/torque transmitting block, and fixing blocks. It is designed by using the FEM(Finite Element Method), and fabricated by using strain gages. The characteristic tests of the sensor are carried out, and the interference error, repeatability error, and non-linearity error are less than 2.21%, 0.03% and 0.03%. Furthermore, the structure of the four-axis force/torque sensor with PSPBs has a larger rated capacity than that of the four-axis force/torque sensor with PPBs under the same overall sensor size and the same rated output. It is thought that the developed four-axis force/torque sensor with PSPBs can be used for measuring the forces and torques in an intelligent robot, automation devices, etc.

키워드

참고문헌

  1. C. G. Kang, "Performance improvement of a 6-axis force-torque sensor via novel electronics and cross-shaped double-hole structure," International Journal of Control, Automation, and Systems, vol. 3, no. 3, pp. 469-476, Sep. 2005.
  2. B. Wu and P. Cai, "Decoupling analysis of a sliding structure six-axis force/torque sensor," Measurement Science Review, vol. 13, no. 4, 2013.
  3. D. I. Kang, G. S. Kim, S. Y. Jeoung, and J. W. Joo, "Design and evaluation of binocular type six-component load cell by using experimental technique," Trans. Korean Society of Mechanical Engineers, vol. 21, pp. 1921-1930, 1997.
  4. D. Diddens, D. Reynaerts, and H. V. Brussel, "Design of a ring-shaped three-axis micro force/torque sensor," Sensors and Actuators A: Physical, vol. 46, no. 1-3, pp. 225-232, 1995. https://doi.org/10.1016/0924-4247(94)00895-O
  5. K. Nagai, Y. Ito, M. Yazaki, K. Higuchi, and S. Abe, "Development of a small six-component force/torque sensor based on the double-cross structure," Journal of the Robotics Society of Japan, vol. 22, no. 3, pp. 361-369, 2004. https://doi.org/10.7210/jrsj.22.361
  6. A. Song, J. Wu, G. Qin, and W. Huang, "A novel self-decoupled four degree-of-freedom wrist force/torque sensor," Measurement, vol. 40, no. 9-10, pp. 883-891, 2007. https://doi.org/10.1016/j.measurement.2006.11.018
  7. H. M. Kim, J. W. Yoon, and G. S. Kim, "Development of a six-axis force/moment sensor for a spherical-type finger force measuring system," IET Science, Measurement and Technology, vol. 6, no. 2, pp. 96-104, 2012. https://doi.org/10.1049/iet-smt.2010.0146
  8. G. S. Kim, "Development of a six-axis force/moment sensor with rectangular taper beams for an intelligent robot," International Journal of Control, Automation, and Systems, vol. 5, no. 4, pp. 419-428, 2007.
  9. J. J. Park and G. S. Kim, "Development of the 6-axis force/moment sensor for an intelligent robot's gripper," Sensors and Actuators A, vol. 118, pp. 127-134, 2005. https://doi.org/10.1016/S0924-4247(04)00538-2
  10. S. Liu and H. L. Tzo, "A novel six-component force sensor of good measurement isotropy and sensitivities," Sensors and Actuators A: Physical, vol. 100, no. 2-3, pp. 223-230, 2002. https://doi.org/10.1016/S0924-4247(02)00135-8
  11. G. S. Kim, H. J. Shin, and J. W. Yoon, "Development of 6-axis force/moment sensor for a humanoid robot's intelligent robot," Sensors and Actuators A, vol. 141, no. 2, pp. 276-281, 2008. https://doi.org/10.1016/j.sna.2007.08.011
  12. ATI Industrial Automation, "Multi-axis forcre/torque sensor," ATI Industrial Automation, pp. 4-45, 2005.
  13. G. S. Kim and J. W. Yoon, "Development of calibration system for multi-axis force/moment sensor and its uncertainty evaluation," Korean Society Precision Engineering, vol. 24, no. 10, pp. 91-98, 2007.

피인용 문헌

  1. Design of an Elbow Rehabilitation Robot based on Force Measurement and its Force Control vol.21, pp.5, 2015, https://doi.org/10.5302/J.ICROS.2015.15.9019
  2. Design of Force Measuring System for Deburring Using Industrial Robot vol.32, pp.7, 2015, https://doi.org/10.7736/KSPE.2015.32.7.653
  3. Design of Force Sensors for the Ankle Rehabilitation Robot of Severe Stroke Patients vol.25, pp.2, 2016, https://doi.org/10.5369/JSST.2016.25.2.148
  4. Design of Three-Axis Force/Torque Sensor for Rehabilitation Robot vol.33, pp.4, 2016, https://doi.org/10.7736/KSPE.2016.33.4.309