대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제38권5호
  • /
  • Pages.559-566
  • /
  • 2014
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

용사 코팅된 스틸바의 트라이볼로지적 특성의 형상학적 관찰

Morphological Observation on Tribological Characteristic of Thermal Spray Coated Steel-Bar

  • Lee, Duk Gyu (Dept. of Mechanical Engineering Education, Andong Nat'l Univ.) ;
  • Cho, Hee Keun (Dept. of Mechanical Engineering Education, Andong Nat'l Univ.)
  • 투고 : 2013.09.12
  • 심사 : 2014.02.11
  • 발행 : 2014.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

제철공장의 소결대차 스틸바의 내열성, 내마모성, 내부식성 등의 성질을 향상시키기 위하여 용사코팅을 적용한 연구가 진행되었다. 약 $700^{\circ}C$의 고온환경에서 내열, 내마모, 부식 등에 노출되어 있는 스틸의 표면에 $Al_2O_3$, $Cr_2O_3$, WC 코팅을 적용하여 국부적으로 고온내마모성, 내식성, 내열성, 내열충격성 등을 향상시킴으로써 기존 제강공정에서 사용되는 스틸바의 수명을 향상시켰다. 스틸바에 적용한 금속용사 코팅층에 대하여 고온내마모시험, 열충격시험, 내부식시험을 수행하였다. 코팅층의 물리적, 화학적, 기계적 특성이 코팅이 안된 재료에 비해 매우 우수하였다.

Plasma coatings have been conducted to improve the mechanical properties of thermal resistance, wear resistance, corrosion resistance and thermal shock with respect to Great-Bar which is used as a carrier device for ironstone sintering under $700^{\circ}C$. The surface coatings on the upper side of the Great-Bar exposed on extreme environments of high temperature, severe wear, corrosion and thermal shock extended the life time due to the barrier coating layer. $Al_2O_3$, $Cr_2O_3$, WC coatings were applied to Great-Bar and their mechanical and chemical properties are analyzed by several experimental tests such as thermal resistance, wear resistance, corrosion resistance and thermal shock resistance. It shows excellent advantages with respect to wear, thermal shock and corrosion.

키워드

참고문헌

  1. Kim, G. S., Oh, M. J., Park, G. S. and Jung, D. W., 1998, "Wear Characteristics of Ceramics Coating Materials with Plasma Spray," Journal of Ocean Engineering and Technology, Vol. 12, No. 4, pp. 43-50.
  2. Suh, C. M., Lee, M. W. and Kim, S. H., 1998, "Damage Mechanism of Particle Impact in a $Cr_2O_3$ Plasma Coated Soda-lime Glass," Journal of Ocean Engineering and Technology, Vol. 12, No. 3, pp. 49-59.
  3. Kim, D. J., Shin, I. H., Koo, J. M., Seok, C. S. and Kim, M. Y., 2009, "Evaluation on the Delamination Life of Isothermally Aged Plasma Sprayed Thermal Barrier Coating," Trans. Korean Soc. Mech. Eng. A, Vol. 33, No. 2, pp. 162-168. https://doi.org/10.3795/KSME-A.2009.33.2.162
  4. Bolelli, G., Cannillo, V., Lusvarghi, L. and Manfredini, T., 2006, "Wear Behavior of Thermally Sprayed Ceramic Oxide Coatings," Journal of Wear, Vol. 261, No. 11-12, pp. 1298-1315. https://doi.org/10.1016/j.wear.2006.03.023
  5. Cao, X. Q., Vassen, R. and Stoever, D., 2004, "Ceramic Materials for Thermal Barrier Coatings," Journal of the European Ceramic Society, Vol. 24, No. 1, pp. 1-10. https://doi.org/10.1016/S0955-2219(03)00129-8
  6. Gell, M., Xie, L., H.Jordan, E. P. and Padture, N., 2004, "Mechanisms of Spallation of Solution Precursor Plasma Spray Thermal Barrier Coatings," Journal of Surface and Coating Technology, Vol. 188-189, pp. 101-106. https://doi.org/10.1016/j.surfcoat.2004.08.004
  7. Cernuschi, F., Lorenzoni, L., Capelli, S., Guardamagna, Co., Karger, M., Vaben, R., von NIessen, K., Markocsan, N., Menuey, J. and Carlo Giolli, 2011, "Solid Particle Erosion of Thermal Spray and Physical Vapour Deposition Thermal Barrier Coatings," Journal of the Wear, Vol. 271, No. 11-12, pp. 2909-2981. https://doi.org/10.1016/j.wear.2011.06.013
  8. Daroonparvar, M., Muhamad, A. M. Y., Noordin, M. Y., Farahany, S., Mohammad, S. H., Hamid, R. B., Valefi, Z. and Abdolahi, A., 2013, "Improvement of Thermally Grown Oxide Layer in Thermal Barrier Coating Systems with Nano Alumina as Third Layer," Journal of Transactions of Nonferrous Metals Society of China, Vol. 23, No. 5, pp. 1322-1333. https://doi.org/10.1016/S1003-6326(13)62600-X
  9. Tolpygo, V. K. and Clarke, D. R., 2003, "Morphological Evolution of Thermal Barrier Coatings Induced by Cyclic Oxidation," Journal of the Surface and Coatings Technology, Vol. 163-164, No. 30, pp. 81-86. https://doi.org/10.1016/S0257-8972(02)00595-9
  10. Shanmugavelayutham, G. and Kobayashi, A., 2007, "Mechanical Properties and Oxidation Behavior of Plasma Sprayed Functionally Graded Zirconia-Alumina Thermal Barrier Coatings," Journal of Materials Chemistry and Physics, Vol. 103, No. 2-3, pp. 283-289. https://doi.org/10.1016/j.matchemphys.2007.02.066
  11. Bae, J. G., Park, S. O. and Jung, I. S., 1989, "Surface Modification of a Mild and Stainless steel by Alumina Spraying," Journal of Metal Finishing Society of Korea, Vol. 22, No. 4, pp. 185-196.
  12. Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus, ASTM G0099-05, 2010.
  13. Bahrololoom, M. E. and Sani, R., 2005, "The Influence of Pulse Plating Parameters on the Hardness and Wear Resistance of Nickel-alumina Composite Coatings," Journal of the Surface and Coating Technology, Vol. 192, No. 2-3, pp. 154-163. https://doi.org/10.1016/j.surfcoat.2004.09.023
  14. Lee, J. K., Lee, J. H. and Kim, B. A., 1999, "Characteristics of Mechanical Properties of $Al_2O_3$ Ceramics Due to Cyclic Thermal Shock Damage," Trans. Korean Soc. Mech. Eng. A, Vol. 23, No. 9, pp. 1507-1515.
  15. Mark, E., Kim, H. J. and Kweon, Y. G., 1999, "Microstructural Evaluation of the $Al_2O_3$ and $Cr_2O_3$ Based Coatings Produced by the APS Process," Rist Research Paper, Vol. 13, No. 4, pp. 459-467.