DOI QR코드

DOI QR Code

스마트 폰을 이용한 다기능 용접기 원격 제어 시스템에 관한 연구

A study on multi-functional welder remote control system using smart phone

  • 투고 : 2013.12.18
  • 심사 : 2014.03.10
  • 발행 : 2014.03.31

초록

본 연구에서는 크레이터의 전류, 전압, 가스 제어, 와이어 피더 구동, 정전압 출력 제어, 고주파 제어, 정전류 제어, 및 아크 용접 제어 등을 스마트 폰을 이용하여 다기능 용접기를 쉽게 제어할 수 있는 시스템을 제안하였다. 제안 시스템을 사용하는 경우 90% 정도가 다기능 용접기를 이용하는데 용이하다는 결과를 얻었다. 10%는 있으면 좋겠지만 필요 없다는 대답과 "용이하다"라고 응답한 대상자 90%중 30% 정도는 용접기를 사용하면서 사용 연령층에 따라서 스마트 폰 활용이 "매우 어렵다"라고 응답한 경우도 조사되었다. 그러나 스마튼 폰 이용은 점진적으로 사용자의 연령층이 낮아질수록 효과적임을 알 수 있다.

In this study, we are a proposed system that could control a multi-functional welder of the current, voltage of the crater, gas control, the wire feeder's driven, the constant voltage output control, high frequency control, rated current control and the ARC welding control etc., using the mobile-based smart phone. Approximately 90% of user of proposed system are very useful in multi-function welder in their task responded and rest of 10% of the answers don't need it. 30% answered in 90% of the multi-function welding machine according to age group using a smart phone utilizing this "very difficult" at investigated. However, the use of smart phones is gradually lower the user's age group can be seen that effective.

키워드

참고문헌

  1. J. Kim, J. Choi, and Y. Jeong, "A Study on control mode of hybrid multi- function welder," J. of the Korea institute Electronic and Communication Science, vol. 8 no. 3, 2013, pp. 439-445. https://doi.org/10.13067/JKIECS.2013.8.3.439
  2. H. Park, "Control of ARC welding output power using Fuzzy Algorithm," J. of the Korea Electrical Manufacturers Association, vol. 11, no. 3, 2000, pp. 29-39.
  3. B. Gang, H. Kim, S. Yang, B. Kim, C. Kim, and S. Choi, "A Study on development Ultra performance MAG WELDING SYSTEM," Kitech, Research Report, 1995, pp. 17-27.
  4. K. Park and H. Song, "An Automated Projection Welding System using Vision Processing Technique," J. of the Korea institute Electronic and Communication Science, vol. 6, no. 4, 2011, pp. 517-522.
  5. Y. Jeong, T. Um, G. Kim, and H. Whang, "A hybrid study on self-generators based on system for high-efficiency," J. of the Korea institute Electronic and Communication Science, vol. 6, no. 3, 2011, pp. 417-423.
  6. W. Choi "A Study on the Battery Charging System using DC-DC Buck Converter," Master's Thesis of Chosun University, 2010, pp, 29-33.
  7. G. Lee, "A study on the calculation of optimal capacity of the battery according to the characteristic of load," Master's Thesis of Hong-Ik University, 2011, pp. 36-53.
  8. Y. Jeong, T. Um, G. Kim, and H. Choi, "A study on control of generators based on SMPS," J. of the Korea institute Electronic and Communication Science, vol. 7, no. 1, 2012, pp. 107-115.