동력기계공학회지 (Journal of Power System Engineering)

  • 제18권2호
  • /
  • Pages.37-42
  • /
  • 2014
  • /
  • 2713-8429(pISSN)
  • /
  • 2713-8437(eISSN)
한국동력기계공학회 (The Korean Society for Power System Engineering)
권호 표지
DOI QR코드

DOI QR Code

후열처리한 니켈기 자융성 합금 코팅의 알칼리 용액에서의 분극특성

Polarization Characteristics of Heat-treated Ni-based Self-flux Alloy Coating in Alkaline Solution

  • 김태용 (부경대학교 대학원) ;
  • 김재동 (경상대학교 해양산업연구소) ;
  • 김영식 (부경대학교 기계자동차공학과)
  • Kim, Tea-Yong (Graduate School of Pukyong National University) ;
  • Kim, Jea-Dong (Institute of Marine Industry Gyeongsang National University) ;
  • Kim, Yeong-Sik (Department of Mechanical & Automotive Engineering, Pukyong National University)
  • 투고 : 2013.07.16
  • 심사 : 2014.03.04
  • 발행 : 2014.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The purpose of this paper is to investigate polarization characteristics of heat-treated Ni-based self-flux alloy coating in alkaline solution. Ni-based self-flux alloy powder was sprayed to a steel substrate using flame spray process, and heat treatments were performed in a vacuum furnace at $800^{\circ}C$, $900^{\circ}C$, $1000^{\circ}C$ and $1100^{\circ}C$. After heat treatments, corrosion tests were carried out using potentiostat/galvanostat at solution with pH 8 and pH 13. Corrosion potential(Ecorr) and corrosion current density(Icorr) could be analyzed from polarization curve. Anticorrosive effect of heat-treated coating at solution with pH 8 was relatively greater than at solution with pH 13. Heat-treated coating at $1100^{\circ}C$ showed the greatest anti-corrosion characteristics in alkaline solution.

키워드

참고문헌

  1. A. Lauwers et al., 2004, "Ni based silicides for 45 nm CMOS and beyond", Materials Science and Engineering, Meeting, Vol. 114-115, pp. 29-41.
  2. L. Zheng, C. Xiao and G. Zhang, 2012, "Brittle fracture of gas turbine blade caused by the formation of primary $\beta$-NiAl phase in Ni-base superalloy", Engineering Failure Analysis, Vol. 26, pp. 318-324. https://doi.org/10.1016/j.engfailanal.2012.07.014
  3. A. F. Baldissera, C. A. Ferreira, 2012, "Coatings based on electronic conducting polymers for corrosion protection of metals", Progress in Organic Coatings, Vol. 75, pp. 241-247.
  4. K. T. Kim, Y. S. Kim and M. S. Oh, 2007, "Effect of Heat Treatment Conditions on the Microstructure and Wear Behavior of Ni-based Self-flux Alloy Coatings", Journal of The Korean Society for Power System Engineering, Vol. 11, No. 1 pp. 121-126.
  5. J. S. Oh, J. Komotori and J. G. Song, 2008, "Fatigue strength and fracture mechanism of different post-fused thermal spray-coated steels with a Co-based self-fluxing alloy coating", International Journal of Fatigue, Vol. 30, No. 8, pp. 1441-1447. https://doi.org/10.1016/j.ijfatigue.2007.10.004
  6. H. J. Kim et al., 2003, "Assessment of wear performance of flame sprayed and fused Ni-based coatings", Surface and Coatings Technology, Vol. 172, No. 2-3, pp. 262-269. https://doi.org/10.1016/S0257-8972(03)00348-7
  7. T. Y. Kim, J. D. Kim and Y. S. Kim, 2013, "Effect of Fusing Treatment on Anti-Corrosion Characteristics of Ni-based Self-flux Alloy Coating", Abstract Book of 2013 Spring Coference of KSME, pp. 71-72.
  8. W. Liang et al., 2011, "The corrosion behavior of porous Ni3Al intermetallic materials in strong alkali solution", Intermetallics, Vol. 19, pp. 1759-1765. https://doi.org/10.1016/j.intermet.2011.06.016
  9. H. J. Kim et al., 2003, "Assessment of wear performance of flame sprayed and fused Ni-based coating", Surface & Coatings Technology, Vol. 172, pp. 262-269. https://doi.org/10.1016/S0257-8972(03)00348-7