Journal of the Korean GEO-environmental Society (한국지반환경공학회 논문집)

Korean Geo-Environmental Society (한국지반환경공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Estimation of Failure Probability of Allowable Stress Design using Reliability Analysis to the Bearing Capacity the Deep Water Depth Large-diameter Drilled Shaft

대수심 대구경 현장타설말뚝의 지지력에 대한 신뢰성 해석을 이용한 허용응력 설계의 파괴확률 평가 연구

  • Han, Yushik (Department of Civil Engineering, Kyungsung University) ;
  • Lee, Yunkyu (R&D Team, Resarch Institute of Technology, TAEYOUNG E&C) ;
  • Choi, Yongkyu (Department of Civil Engineering, Kyungsung University)
  • Received : 2014.01.16
  • Accepted : 2014.03.10
  • Published : 2014.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

A Large-diameter drilled shaft of deep water depth composite foundation supporting a high rise pylon of the test designed super long span bridge was designed by allowable stress design method and failure probability through reliability analysis to bearing capacity was estimated. The allowable stress design results for the bearing capacity of a drilled shaft were analyzed by reliability analysis and the probability of failure shows 0.12 % in case of CFEM, 0.0002 % in case of Korea Highway Corporation criterion, and 0.003 % in case of structure foundation design criterion. In the allowable stress design, the bearing capacity of a large-diameter drilled shaft was obtained by applying to safety factor 3 and reliability analysis for the results was done. If the failure probability suggested by AASHTO(2007) specification is set to 0.02 %, the socketed length of a drilled shaft shows an increase of 25 % in CFEM, decrease of 60 % in KHCC, and decrease of 89 % in SFDC.

시험 설계된 초장대 사장교의 고주탑을 지지하는 대수심 대형 복합기초의 지중 대구경 현장타설말뚝을 허용응력 설계법으로 설계하고, 지지력에 대한 신뢰성 해석을 통해 파괴확률을 평가하였다. 말뚝의 지지력에 대한 허용응력 설계 결과를 신뢰성 해석으로 분석하였으며 파괴확률은 CFEM의 경우 0.12 %, 한국도로공사기준 방법의 경우 0.0002 %, 구조물기초설계기준의 경우 0.003 %였다. 허용응력 설계에서는 안전율 3을 적용하여 대구경 현장타설말뚝의 허용지지력을 구하였으며, 그 결과에 대한 신뢰성 해석을 실시하였다. AASHTO(2007)에서 제시하고 있는 파괴확률($P_f$) 0.02 %일 때 CFEM 방법에서는 근입 깊이가 25 % 만큼 증가하였으며 한국도로공사기준(KHCC)에서는 근입깊이를 60 %, 구조물기초설계기준(SFDC)에서는 근입 깊이를 89 % 만큼 감소시킬 수 있었다.

Keywords

References

  1. AASHTO (2007), AASHTO LRFD bridge design specifications 4th edition, AASHTO, Washington D.C., pp. 2-16, 3-37, 10-40.
  2. Canadian Geotechnical Society (2006), Canadian foundation engineering manual 4th edition, Bitech Publishers, Vancouver, BC., pp. 296-298.
  3. ENVICO & DM (2008), Basic design of long span bridge, pp. 1-77 (in Korean).
  4. Goda, Y. (1973), A new method of wave pressure calculation for the design of composite breakwater, Report of the Port and Harbour Research Institute, Vol. 12, No. 3, pp. 31-69 (in Japanese)
  5. Korean Geotechnical Society (2009), Structural foundation design criteria, Goomibook, pp. 320-322 (in Korean).
  6. Korea Highway Corporation (2002), Guidelines for design of drilled shafts in rock, pp. 6-7 (in Korean).
  7. Korea Institute of Construction Technology (2008), Determination of resistance factors for foundation structure design by LRFD, Ministry of Land, Infrastructure and Transport, p. 2 (in Korean).
  8. Korea Ports & Harbours Association (2004), Ports & Harbours design criteria, Ministry of Oceans and Fisheries, pp. 701-702 (in Korean).
  9. Korean Society of Civil Engineers (2008), Highway bridge design criteria, Kimoondang, pp. 41, 64-66 (in Korean).
  10. Midas GTS (2011a), Getting started, Midas Information Technology Co., Ltd, pp. 1-104 (in Korean).
  11. Midas GTS (2011b), Analysis reference, Midas Information Technology Co., Ltd, pp. 1-300 (in Korean).
  12. NAVFAC (1986), Foundation and earth structures (Design manual 7.2), Department of the Naval Facilities Engineering Command, pp. 234.
  13. Peck, R. B., Hanson, W. E. and Thornburn, T. H. (1974), Foundation engineering, 2nd. Edition, John Wiley & Sons Inc., New York, pp. 361-371.
  14. Prakoso, W. A. and Kulhawy, F. H. (2001), Contibution to piled raft foundation design, Jounal of Geotechnical and Geoenvironmental Engineeing, Vol. 127, No. 1, pp. 17-24. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:1(17)
  15. Yang, Y. S., Suh, Y. S. and Lee, J. O. (2006), Structural reliability engineering, Seoul National University Press, pp. 51-68 (in Korean).