DOI QR코드

DOI QR Code

Metal Cover에 의한 EMC 분석 및 Noise 저감 방법

The Effect of EMC by Metal Cover and Noise Reduction Method

  • Yun, Sangwon (Electronics Development Team 3, MANDO Company) ;
  • Park, Chuleui (Electronics Development Team 3, MANDO Company) ;
  • Lee, Chanho (Electronics Development Team 3, MANDO Company) ;
  • Kim, Sehyun (Electronics Development Team 3, MANDO Company) ;
  • Yang, Manyoung (Electronics Development Team 3, MANDO Company) ;
  • Kim, Dongsik (Department of Electrical Engineering, College of Engineering, Soonchunhyang University) ;
  • Yoo, Jiyoon (Department of Electrical Engineering, Korea University)
  • 투고 : 2013.10.31
  • 심사 : 2014.02.21
  • 발행 : 2014.04.01

초록

The ECU which is operating inductive actuator like motor or solenoid should be designed with considering the heat removal performance and the EMC performance. In most cases, these two performances are trade-off. Especially, the metal cover with plastic housing for improving heat removal performance can affect EMC performance by coupling the noise source to harness cable and connector. Therefore, after analyzing the EMC effectiveness of the metal cover, countermeasures for EMC noise reduction should be established. In this paper, by simulating and testing of AHB Gen3 ECU, the influence of the metal cover to EMC performance is analyzed. And based on this result, we propose solutions for EMC noise reduction.

키워드

참고문헌

  1. J. Jung, "Early Stage ECU EMC Improvement by Simulation," KSAE Annual Conference Proceedings, pp.863-864, 2013.
  2. M. Yang, "How to Design Chassis Control ECU for EMC Robustness," KSAE Annual Conference Proceedings, pp.1544-1549, 2012.
  3. S. Yun, "ECU Circuit Design Guideline for Improving EMC Performance," KSAE Annual Conference Proceedings, pp.1636-1641, 2011.
  4. C. Lee, MANDO EMC Design Guideline, 2013.
  5. Y. Kim, "Brake ECU Design for Reducing EMC Noise," KSAE Annual Conference Proceedings, pp.1550-1556, 2012.